Content      ..     6      7      8      9     ..

Citroen Jumpy Dispatch (2023 year). Manual in english - page 8

MyCitroën Play

Mute/restore sound by simultaneously

Steering-mounted

11

pressing the increase and decrease

controls

volume buttons.

Steering mounted controls -

Steering mounted controls -

Type 1

Type 2

Radio:

Voice control:

Select the previous/next preset radio

This control is located on the steering

In the "Settings" menu, it is possible to

station.

wheel or at the end of the lighting control stalk

create a profile for an individual or for a

Select the previous/next item in a menu or a list.

(depending on equipment).

group of people with shared interests, and

Media:

Short press: smartphone voice commands via

configure a wide range of settings (radio

Select the previous/next track.

the system.

presets, audio settings, ambiences, etc.).

Select the previous/next item in a menu or a list.

Increase volume.

Settings are applied automatically.

Radio:

Short press: display the list of radio

Decrease volume.

In very hot conditions, the volume may

Mute by pressing the volume increase

stations.

be limited to protect the system. It may

and decrease buttons simultaneously

Long press: update the list.

enter standby mode (with the screen and

(depending on equipment).

Media:

sound off) for 5 minutes or more.

Restore the sound by pressing one of the two

Short press: display the list of folders.

The system will resume normal operation

volume buttons.

Long press: display the available sorting options.

when the temperature in the passenger

Media (short press): change the

Change audio source (radio; USB; AUX if

compartment has dropped.

multimedia source.

equipment connected; CD; streaming).

Confirm a selection.

Telephone (short press): start telephone

call.

Increase volume.

Call in progress (short press): access

telephone menu.

Decrease volume.

Telephone (long press): reject an incoming call,

end call; when no call is in progress, access

telephone menu.

245

CarManuals2.co

MyCitroën Play

Radio (rotate): automatic search for the

Radio Media

Settings

previous/next station.

Media (rotate): previous/next track, move

through a list.

Short press: confirm a selection; if nothing

selected, access presets.

Radio: display the list of stations.

Media: display the list of tracks.

Radio (press and hold): update the list of

detected stations.

Menus

Select an audio source or radio station.

Configure a personal profile and/or

configure the sound (balance, ambience,

Applications

etc.) and the display (language, units, date, time,

Telephone

etc.).

Driving

Access configurable equipment.

Connect a mobile phone via Bluetooth^®.

Run certain applications from a

smartphone connected via CarPlay^® or Android

Activate, deactivate or configure certain

Auto.

vehicle functions.

246

CarManuals2.co

MyCitroën Play

Navigation

Applications

Press this button to search and select a

11

recipient.

Select the "Quick messages” tab.

Viewing photos

Insert a USB memory stick in the USB port.

Press this button to select the display

settings for messages.

To protect the system, do not use a USB

Press this button to write a new message.

hub.

The system can read folders and image files in

Press the bin alongside the selected

the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.

message to delete it.

Press Applications to display the main

Press this button alongside the selected

page.

message to display the secondary page.

Configure the navigation and select your

Press "Photos".

Press this button to edit and modify the

destination via CarPlay^® or Android Auto.

existing text.

Select a folder.

Press this button to write a new message.

Air conditioning

Select an image to view.

Press the bin to delete the message.

Press this button to display the details of

the photo.

Radio

Press the back arrow to go back a level.

18,5

21,5

Selecting a station

Managing messages

Press Radio Media to display the main

Press Applications to display the main

page.

page.

Press one of the buttons to perform an

Manage various temperature and air flow

Press "SMS".

automatic search for radio stations.

settings.

Or

Select the "SMS” tab.

Move the slider to manually search for

frequencies up or down.

Press this button to select the display

Or

settings for messages.

Press the frequency.

247

CarManuals2.co

MyCitroën Play

Enter the FM and AM waveband values

Or

Press the "OPTIONS" button to access the

using the virtual keypad.

Select a radio station or frequency.

secondary page.

Press "OK" to confirm.

Press "Preset".

Activate/deactivate "News".

Make a long press on one of the buttons

to preset the station.

Press in the shaded area to confirm.

Radio reception may be affected by the

use of electrical equipment not approved

Activating/Deactivating RDS

by the Brand, such as a USB charger

RDS, if activated, allows you to continue

Playing TA messages

connected to the 12 V socket.

listening to the same station by automatically

The TA (Traffic Announcement) function gives

The exterior environment (hills, buildings,

retuning to alternative frequencies.

priority to TA alert messages. To operate, this

tunnels, basement car parks, etc.) may

Press Radio Media to display the main

function needs good reception of a radio station

block reception, including in RDS mode.

page.

that transmits this type of message. While traffic

This phenomenon is perfectly normal in the

Press the "OPTIONS" button to access the

information is being broadcast, the current

context of radio wave transmission, and

secondary page.

media is automatically interrupted so that the

in no way indicative of an audio system

Activate/deactivate "RDS".

TA message can be heard. Normal play of the

malfunction.

previously playing media resumes at the end of

Press in the shaded area to confirm.

the message.

Changing the waveband

Press Radio Media to display the main

Press Radio Media to display the main

page.

RDS station tracking may not be

page.

Press the "OPTIONS" button to access the

available nationwide, as many radio

Press the "OPTIONS" button to access the

secondary page.

stations do not cover 100 % of the country.

secondary page.

Activate/deactivate "TA".

This explains the loss of reception of the

Press "Band" to change waveband.

station during a journey.

Press in the shaded area to confirm.

Press in the shaded area to confirm.

Displaying text information

Audio settings

The "Radio Text" function displays information

Presetting a station

transmitted by the radio station relating to the

Press Radio Media to display the main

Select a radio station or frequency.

station or the currently playing song.

page.

Make a short press on the star outline. If

Press Radio Media to display the main

Press the "OPTIONS" button to access the

the star is solid, the radio station is

page.

secondary page.

already preset.

Press "Audio settings".

248

CarManuals2.co

MyCitroën Play

Select the "Tone", "Balance", "Sound",

Press in the shaded area to confirm.

DAB (Digital Audio

11

"Voice" or "Ringtones" tab to configure

the sound settings.

Broadcasting) radio

If "FM-DAB Follow-up" is activated, there

Press the back arrow to confirm.

Terrestrial Digital Radio

may be a time offset of a few seconds

when the system switches to "FM" analogue

In the "Tone" tab, the Ambience, Bass,

Terrestrial Digital Radio

radio, and in some cases a change in volume.

Medium and Treble sound settings are

When the digital signal quality is restored, the

Digital radio provides higher quality sound.

different and independent for each audio

system automatically changes back to "DAB".

The various "multiplexes/ensembles" offer a

source.

To minimise this time lag, storing radio

choice of radio stations organised in alphabetical

In the "Balance” tab, the All passengers,

stations in the "DAB" band is recommended.

order.

Driver and Front only settings are common

Press Radio Media to display the main

to all sources.

page.

If the "DAB" station being listened to is

In the "Sound” tab, activate or deactivate

Press the "OPTIONS" button to access the

not available on "FM", or if "FM-DAB

"Volume linked to speed", "Auxiliary input"

secondary page.

Follow-up" is not activated, the sound will cut

and "Touch tones".

Press "Band" to select "DAB band".

out when the digital signal becomes too weak.

The balance/distribution (or spatialisation

Press in the shaded area to confirm.

Media

processing to adjust the sound quality

according to the number of passengers in the

FM-DAB Follow-up

USB port

vehicle.

"DAB" does not cover 100% of the territory.

Insert the USB memory stick into the USB

When the digital radio signal is poor, the

port or connect the USB device to the

"FM-DAB Follow-up" enables you to continue

USB port using a suitable cable (not supplied).

optimises the sound distribution inside

listening to the same station by automatically

the passenger compartment.

switching to the corresponding "FM" analogue

To protect the system, do not use a USB

station (if there is one).

hub.

Press Radio Media to display the main

The system builds playlists (in temporary

page.

memory); this operation can take from a

Press the "OPTIONS" button to go to the

few seconds to several minutes at the first

secondary page.

connection.

Activate/deactivate "FM-DAB Follow-up".

249

CarManuals2.co

MyCitroën Play

Reduce the number of non-music files and the

If play does not start automatically, it may be

Information and advice

number of folders to reduce the waiting time.

necessary to start the audio playback from the

The system supports USB mass storage

Playlists are updated whenever the ignition

smartphone.

devices, BlackBerry^® devices or Apple^® players

is switched off or a USB memory stick is

Control is from the portable device or by using

via the USB ports. The adapter cable is not

connected. The audio system memorises these

the system's touch buttons.

supplied.

lists, which will subsequently load faster if they

Once connected in Streaming mode, the

Devices are managed using the audio system

have not been changed.

smartphone is considered to be a media

controls.

source.

Other devices, not recognised on connection,

Auxiliary (AUX) jack socket

must be connected to the auxiliary socket using

Depending on equipment

a jack cable (not supplied) or via Bluetooth

Connect a portable device (MP3 player,

Connecting Apple^® players

streaming, if compatible.

etc.) to the auxiliary jack socket using an

Connect the Apple^® player to the USB socket

audio cable (not supplied).

To protect the system, do not use a USB

using a suitable cable (not supplied).

This source is only available if "Auxiliary input"

hub.

Play starts automatically.

has been selected in the audio settings.

Control is via the audio system.

The audio system will only play audio files with

First adjust the volume on the portable device

The classifications available are those of

".wav", ".wma", ".aac", ".ogg" and ".mp3" file

(to a high level). Then adjust the volume of the

the portable device connected (artists/

extensions, at bit rates between 32 Kbps and

audio system.

albums/genres/playlists/audio books/

320 Kbps.

Controls are managed via the portable device.

podcasts). It is also possible to use a

It also supports VBR (Variable Bit Rate) mode.

classification structured in the form of a

No other file types (".mp4", etc.) can be read.

Selecting the source

library.

All ".wma" files must be standard WMA 9 files.

Press Radio Media to display the main

The default classification used is by artist. To

The supported sampling rates are 11, 22, 44 and

page.

modify the classification used, return to the

48 KHz.

Press the "SOURCES" button.

first level of the menu then select the desired

To avoid reading and display problems, we

Select the source.

classification (playlists for example) and

recommend choosing file names less than 20

confirm to go down through the menu to the

characters long that do not contain any special

BluetoothStreaming^®

desired track.

characters (e.g. “ ? . ; ù).

Streaming allows you to listen to the audio feed

Use only USB memory sticks in FAT32 format

from your smartphone.

The version of software in the audio system may

(File Allocation Table).

The Bluetooth profile must be activated.

not be compatible with the generation of the

First adjust the volume on the portable device

We recommend using the original USB

Apple^® player.

(to a high level). Then adjust the volume of the

cable for the portable device.

system.

250

CarManuals2.co

MyCitroën Play

Telephone

On connecting the USB cable, the

Android Auto smartphone

11

CarPlay^® function deactivates the

connection

USB sockets

system's Bluetooth^® mode.

The "CarPlay" function requires the use of

Depending on country.

Depending on equipment, for more information

a compatible smartphone and compatible

On the smartphone, download the

on the USB sockets compatible with CarPlay^® or

applications.

Android Auto application.

Android Auto applications, refer to the "Ease of

use and comfort" section.

The "Android Auto" function requires the

Connect the USB cable. The smartphone

use of a compatible smartphone and

For the list of compatible smartphones,

charges when connected by the USB

applications.

visit the Manufacturer's website in your

cable.

country.

From the system, press Telephone to

display the CarPlay^® interface.

Telephone not connected by

Synchronising a smartphone enables

Or

Bluetooth^®

users to display applications that support

If the smartphone has already connected

Connect a USB cable. The smartphone

the smartphone’s CarPlay^® or Android Auto

by Bluetooth^®.

charges when connected by a USB cable.

technology on the vehicle’s screen. For

Connect the USB cable. The smartphone

From the system, press "Telephone" to

CarPlay^® technology, the CarPlay^® function

charges when connected by the USB

display the main page.

must first be activated on the smartphone.

cable.

Press "Android Auto" to start the

Unlock the smartphone for the communication

From the system, press "Telephone" to

application in the system.

process between the smartphone and the

display the main page.

Depending on the smartphone, it may be

system to work.

Press the "PHONE" button to go to the

necessary to activate the "Android Auto"

As principles and standards are constantly

secondary page.

function.

changing, we recommend keeping the

Press "CarPlay" to display the CarPlay^®

During the procedure, several screen

smartphone's operating system up-to-

interface.

pages relating to certain features are

date, together with the date and time on

When the USB cable is disconnected

displayed.

the smartphone and the system.

and the ignition is switched off then back

Accept to start and complete the connection.

on, the system will not automatically switch to

When connecting a smartphone to the

Radio Media mode; the source must be

system, we recommend enabling

CarPlay^® smartphone

changed manually.

Bluetooth^® on the smartphone.

connection

Depending on country.

The CarPlay^® navigation can be accessed

Telephone connected by Bluetooth^®

at any time by pressing the system's

From the system, press "Telephone" to

Navigation button.

display the main page.

251

CarManuals2.co

MyCitroën Play

Press the "PHONE" button to display the

If the pairing procedure fails, we

Depending on the type of telephone, you may by

secondary page.

recommend deactivating and then

prompted to accept the transfer of contacts and

Press "Android Auto" to start the

reactivating the Bluetooth function on the

messages.

application in the system.

telephone.

The ability of the system to connect just

Access to the different audio sources remains

one profile depends on the telephone.

available in the margin of the Android Auto

Procedure from the telephone

All three profiles may connect by default.

display, using the touch buttons located in the

Select the name of the system in the list

upper bar.

of detected devices.

The profiles compatible with the system

Access to the menus for the system is possible

In the system, accept the connection request

are: HFP, OPP, PBAP, A2DP, AVRCP,

at any time using the dedicated buttons.

from the telephone.

MAP and PAN.

There may be a pause before

applications become available,

Procedure from the system

Visit the Brand's website for more information

depending on the quality of the network.

(compatibility, additional help, etc.).

Press Telephone to display the main

page.

Automatic reconnection

Press "Bluetooth search".

Pairing a Bluetooth^®

On returning to the vehicle, if the last telephone

The list of detected telephones is

telephone

connected is present again, it is automatically

displayed.

recognised and within about 30 seconds

Select the name of the chosen telephone

The services available depend on the

after switching on the ignition, the pairing is

in the list.

network, the SIM card and the

established automatically (Bluetooth activated).

compatibility of the Bluetooth devices used.

Connection sharing

To modify the connection profile:

Consult the telephone user guide and the

Press Telephone to display the main

The system offers to connect the telephone with

service provider to check which services are

page.

3 profiles:

available.

Press the "PHONE" button to access the

- "Telephone" (hands-free kit, telephone only),

secondary page.

The Bluetooth function must be activated and

- “Streaming" (streaming: wireless playing of

Press "Bluetooth connection" to

the telephone configured as "Visible to all” (in the

audio files on the telephone),

display the list of paired devices.

telephone settings).

- "Mobile internet data".

Press the "Details" button for a paired

To complete the pairing, whichever procedure is

Select one or more profiles.

device.

used (from the telephone or from the system),

Select one or more profiles.

ensure that the code is the same in the system

Press "OK" to confirm.

and in the telephone.

252

CarManuals2.co

MyCitroën Play

Press "OK" to confirm.

on the steering mounted PHONE button

Press "Call".

11

to reject the call.

Or

Managing paired telephones

Press "End call".

Calling a recently used

This function lets you connect or disconnect a

number

device or delete a pairing.

Press Telephone to display the main

Press Telephone to display the main

Making a call

page.

page.

Using the telephone is not recommended

Or

Press the "PHONE" button to access the

while driving.

Press and hold

secondary page.

Parking the vehicle.

Press "Bluetooth connection" to

Make the call using the steering mounted

the steering mounted button.

display the list of paired devices.

controls.

Press on the name of the telephone

Press "Recent calls".

selected in the list to disconnect it.

Select the desired contact from the displayed list.

Press again to connect it.

Calling a new number

It is always possible to make a call

Press Telephone to display the main

Deleting a telephone

directly from the telephone; as a safety

page.

Press the basket at the top right of the

measure, first park the vehicle.

Enter the phone number using the digital

screen to display a basket alongside the

keypad.

telephone chosen.

Press "Call" to start the call.

Setting the ringtone

Press the basket alongside the telephone

chosen to delete it.

Press Telephone to display the main

page.

Calling a contact

Receiving a call

Press the "OPTIONS" button to access the

Press Telephone to display the main

secondary page.

An incoming call is announced by a ring and a

page.

Press "Ring volume" to display the

superimposed display in the screen.

Or press and hold

volume bar.

Make a short press on the steering

Press the arrows or move the slider to set

mounted PHONE button to accept an

the steering mounted PHONE button.

the ring volume.

incoming call.

And

Press "Contacts".

Make a long press

Select the desired contact from the displayed list.

253

CarManuals2.co

MyCitroën Play

Settings

Modifying system settings

Press Settings to display the main page.

Press Settings to display the main page.

Press "Configuration" to access the

Configuring profiles

secondary page.

Press "Configuration" to access the

Press Settings to display the main page.

Press "Screen configuration".

secondary page.

Press "System configuration".

Press "Profiles".

Press "Brightness".

Move the slider to adjust the brightness of

Press the "Units" tab to change the units of

Select "Profile 1", "Profile 2", "Profile 3” or

the screen and/or the instrument panel

distance, fuel consumption and temperature.

"Common profile".

(depending on version).

Press the "Factory settings" tab to restore the

Press this button to enter a name for the

Press the back arrow to confirm.

initial settings.

profile using the virtual keypad.

Press "OK" to save.

Returning the system to factory settings

Press "Animation".

activates the English language by default

Activate or deactivate: “Automatic

Press the back arrow to confirm.

(depending on version).

scrolling”.

Select "Animated transitions".

Press this button to activate the profile.

Press the "System info" tab to display the

versions of the various modules installed in the

Press the back arrow to confirm.

Press the back arrow again to confirm.

system.

Press the "Privacy" tab,

Press this button to reset the selected

or

Selecting the language

profile.

Press Settings to display the main page.

Press Settings to display the main page.

Adjusting the brightness

Press "Privacy" to activate or deactivate

Press "Configuration" to access the

the private data mode.

Press Settings to display the main page.

secondary page.

Activate or deactivate:

Select "Language" to change the

Press Brightness.

language.

- "No sharing (data, vehicle position)".

Press the back arrow to confirm.

- "Only data sharing”

Move the slider to adjust the brightness of

- "Data and vehicle position sharing"

the screen and/or the instrument panel

Press the back arrow to confirm.

(depending on version).

Setting the time

Press in the shaded area to confirm.

Press Settings to display the main page.

254

CarManuals2.co

MyCitroën Play

Press "Configuration" to access the

Press this button to set the date.

The environment (hills, buildings, tunnels,

11

secondary page.

basement car parks, etc.) is blocking reception,

Press "Date and time".

Press the back arrow to save the date.

including in RDS mode.

This is a perfectly normal phenomenon, and is

Select "Time".

Select the display format for the date.

not indicative of an audio system malfunction.

Press this button to set the time using the

The aerial is missing or has been damaged

virtual keypad.

Press the back arrow again to confirm.

(for example while entering a car wash or

Press "OK" to save the time.

underground car park).

► Have the aerial checked by a dealer.

Time and date setting is only available if

Press this button to set the time zone.

I cannot find some radio stations in the list of

"GPS Synchronisation:" is deactivated.

received stations.

Select the display format for the time

The name of the radio station changes.

(12h/24h).

The station is no longer received or its name has

Frequently asked

Activate or deactivate summer time (+1

changed in the list.

hour).

questions

► Press the round arrow on the "List" tab on the

Activate or deactivate GPS

"Radio" page.

The following information groups together the

synchronisation (UTC).

Some radio stations send other information

answers to the most frequently asked questions

Press the back arrow to save the settings.

in place of their name (the title of the song for

concerning the system.

example).

The system interprets these details as the station

The system may not automatically

Radio

name.

manage the change between winter and

The reception quality of the tuned radio

► Press the round arrow on the "List" tab on the

summer time (depending on the country of

station gradually deteriorates or the station

"Radio" page.

sale).

presets are not working (no sound, 87.5 MHz

is displayed, etc.).

Media

The vehicle is too far from the selected station’s

Setting the date

Playback of my USB memory stick starts only

transmitter, or no transmitter is present in the

Press Settings to display the main page.

after a very long wait (around 2 to 3 minutes).

geographical area.

Some files supplied with the memory stick may

► Activate the "RDS" function in the upper bar

Press "Configuration" to access the

greatly slow down access to reading the memory

to enable the system to check whether there is

secondary page.

stick (multiplication by 10 of the cataloguing

a more powerful transmitter in the geographical

Press "Date and time".

time).

area.

Select "Date".

255

CarManuals2.co

MyCitroën Drive

The system is protected so that it only

All of the touch areas of the screen are white.

MyCitroën Drive

12

operates in the vehicle.

Press the back arrow to go back a level.

The message Energy economy mode is

Press "OK" to confirm.

GPS navigation -

displayed when the system is about to go into

The touch screen is of the "capacitive"

Applications - Multimedia

standby.

type.

audio system - Bluetooth^®

To clean the screen, use a soft, non-abrasive

System and map updates can be

cloth (e.g. spectacles cloth) with no additional

telephone

downloaded from the Brand's website.

product.

The update procedure is also available there.

The functions and settings described

Do not use sharp objects on the screen.

vary according to the vehicle version and

Do not touch the screen with wet hands.

configuration, as well as the country of sale.

The system’s Open Source Software

(OSS) source codes are available at the

Certain information is displayed permanently

following addresses:

in the side bars or in the upper bar of the touch

For safety reasons and because they

https://www.groupe-psa.com/fr/oss/

screen (depending on equipment):

require sustained attention by the driver,

https://www.groupe-psa.com/en/oss/

- Air conditioning status information (depending

the following operations must be carried out

on version), and direct access to the

with the vehicle stationary and the ignition

corresponding menu.

on:

- Go directly to the audio source selection

- Pairing the smartphone with the system via

First steps

option, to view the list of radio stations (or list of

Bluetooth.

With the engine running, a press mutes

titles depending on the source).

- Using the smartphone.

the sound.

- Go to the "Notifications" of messages, emails,

- Connecting to the CarPlay^® or Android

With the ignition off, a press turns the system on.

map updates and, depending on the services,

Auto applications (certain applications stop

Increase or decrease the volume using

the navigation notifications.

displaying when the vehicle is moving).

the wheel or the "plus" or "minus" buttons

- Go to the settings for the touch screen and the

- Watching a video (the video stops when the

(depending on the equipment).

digital instrument panel.

vehicle starts to move again).

Use the menu buttons on either side of or below

Audio source selection (depending on

- Changing the system settings and

the touch screen for access to the menus, then

equipment):

configuration.

press the virtual buttons in the touch screen.

- FM/DAB/AM radio stations (depending on

Depending on the model, use the "Source" or

equipment).

AM and DAB radio are not available on

"Menu" buttons to access the rolling menus, then

- Telephone connected via Bluetooth and

Hybrid vehicles.

press the virtual buttons in the touch screen.

Bluetooth multimedia broadcast (streaming).

Display the rolling menus at any time by pressing

- USB memory stick.

the screen briefly with three fingers.

257

CarManuals2.co

MyCitroën Drive

- Media player connected via the auxiliary

Radio: display the list of stations.

Steering-mounted

socket (depending on equipment).

Media: display the list of tracks.

- Video (depending on equipment).

controls

Radio (press and hold): update the list of

Voice control:

detected stations.

This control is located on the steering

wheel or at the end of the lighting control stalk

Menus

(depending on equipment).

Short press, system voice control.

Connected navigation

Long press, voice commands from smartphone

or CarPlay^®, Android Auto via the system.

Increase volume.

Decrease volume.

Mute by pressing the volume increase

In the "Settings" menu, it is possible to

and decrease buttons simultaneously

create a profile for an individual or for a

(depending on equipment).

group of people with shared interests, and

Restore the sound by pressing one of the two

configure a wide range of settings (radio

volume buttons.

presets, audio settings, navigation history,

Media (short press): change the

favourite contacts, etc.). Settings are applied

multimedia source.

Enter navigation settings and choose a

automatically.

Telephone (short press): start telephone

destination.

call.

Use real-time services, depending on equipment.

In very hot conditions, the volume may

Call in progress (short press): access

be limited to protect the system. It may

telephone menu.

enter standby mode (with the screen and

Telephone (long press): reject an incoming call,

sound off) for 5 minutes or more.

end call; when no call is in progress, access

The system will resume normal operation

telephone menu.

when the temperature in the passenger

Radio (rotate): automatic search for the

compartment has dropped.

previous/next station.

Media (rotate): previous/next track, move

through a list.

Short press: confirm a selection; if nothing

selected, access presets.

258

CarManuals2.co

MyCitroën Drive

Applications

Telephone

Vehicle

12

Run certain applications from a

Connect a telephone via Bluetooth^®, read

Activate, deactivate or configure certain

smartphone connected via CarPlay^® or

messages and emails and send quick

vehicle functions.

Android Auto.

messages.

Check the status of the Bluetooth^® and Wi-Fi

Air conditioning

connections.

Settings

Radio Media

18,5

21,5

FM 87.5 MHz

Manage various temperature and air flow

Configure a personal profile and/or

settings.

configure the sound (balance, ambience,

Select an audio source or radio station, or

etc.) and the display (language, units, date, time,

display photographs.

etc.).

259

CarManuals2.co

MyCitroën Drive

Example of a "voice command" for the radio and

Voice commands

media:

"Play artist Madonna"

Steering wheel-mounted

Example of a "voice command" for the

controls

telephone:

Voice commands:

"Call David Miller"

Voice commands can be issued from any

The voice commands, with a choice of 17

screen page after a short press on the "Voice

languages (Arabic, Brazilian, Czech,

commands" button located on the steering

Danish, Dutch, English, Farsi, French,

wheel or at the end of the lighting control stalk

German, Italian, Norwegian, Polish,

A number of commands are available when a

(depending on equipment), as long as there is no

Portuguese, Russian, Spanish, Swedish,

menu is selected.

telephone call in progress.

Turkish), are made using the language

To ensure that voice commands are

previously chosen and set in the system.

always recognised by the system, please

For some voice commands, there are

follow these recommendations:

alternative synonyms.

- use natural language in a normal tone

Example: Guide to / Navigate to / Go to / ...

without breaking up words or raising your

The voice commands in Arabic for: "Navigate

voice.

to address" and "Display POI in the city", are

- always wait for the "beep" (audible signal)

not available.

before speaking.

- for best results, closing the windows and

Information - Using the

sunroof is recommended, to avoid extraneous

Press the Push To Talk button and tell me

interference (depending on version).

system

what you'd like after the tone. Remember

- before issuing a voice command, ask any

When voice commands are activated, by

you can interrupt me at any time by pressing this

other passengers to refrain from speaking.

briefly pressing the button, help is

button. If you press it again while I'm waiting for

displayed on the touch screen, offering various

you to speak, it'll end the conversation. If you

menus and enabling voice-based interaction with

need to start over, say "cancel". If you want to

First steps

the system.

undo something, say "undo". And to get

Example of a "voice command" for

information and tips at any time, just say "help".

navigation:

If you ask to me do something and there's some

"Navigate to address 11 regent street,

information missing that I need, I'll give you

London"

some examples or take you through it step by

260

CarManuals2.co

MyCitroën Drive

step. There's more information available in

To plan a route, say "navigate to" followed by the

distance" or "arrival time". To learn more

12

"novice" mode. You can set the dialogue mode to

address, the contact name or an intersection. For

commands, try saying "help with navigation".

"expert" when you feel comfortable.

example, "navigate to address 11 Regent Street,

Voice commands

London", "navigate to contact, John Miller",

Global voice commands

or "navigate to intersection of Regent Street,

Show POI ''hotel'' at the destination

Voice commands

London". You can specify if it's a preferred

Show nearby POI petrol station

address, or a Point of Interest. For example, say

Navigate to POI Heathrow Airport in London

Set dialogue mode as novice - expert

"navigate to preferred address, Tennis club", or

Navigate to POI petrol station along the route

Select user 1 / Select profile John

"navigate to POI Heathrow Airport in London".

Help messages

Increase temperature

Or, you can just say, "navigate home". To see

Decrease temperature

Points of Interest on a map, you can say things

To see points of interest on a map, you can

Help messages

like "show POI hotels in Banbury". For more

say things like "show hotels in Banbury", "show

information say "help with points of interest" or

nearby parking", "show hotel at the destination"

There are lots of topics I can help you with.

"help with route guidance".

or "show petrol station along the route". If you

You can say: "help with phone", "help with

To choose a destination, say something like

prefer to navigate directly to a point of interest,

navigation", "help with media" or "help with

"navigate to line three" or "select line two". If you

you can say "navigate to nearby petrol station".

radio". For an overview on how to use voice

can't find the destination but the street's right,

If you feel you are not being well understood,

controls, you can say "help with voice controls".

say for example "select the street in line three".

try to say the word "POI" in front of the point

Say "yes" if I got that right. Otherwise, say "no"

To move around a displayed list, you can say

of interest. For example say "navigate to POI

and we'll start that again.

"next page" or "previous page". You can undo

restaurant at the destination".

your last action and start over by saying "undo",

To choose a POI, say something like "select

"Navigation" voice

or say "cancel" to cancel the current action.

line 2". If you've searched for a Point of Interest

Voice commands

and don't see the one you're after, you can filter

commands

further by saying something like "select POI in

Voice commands

Tell me the remaining distance

line 2", or "select the city in line 3". You can also

Tell me the remaining time

scroll through the list by saying "next page" or

Navigate home

Tell me the arrival time

"previous page".

Navigate to work

Stop route guidance

Navigate to preferred address, Tennis club

Depending on the country, give

Help messages

Navigate to contact, John Miller

destination (address) instructions in the

Navigate to address 11 regent street, London

language configured for the system.

You can say "stop" or "resume route guidance".

Help messages

To get information about your current route, you

can say "tell me the remaining time", "remaining

261

CarManuals2.co

MyCitroën Drive

"Radio Media" voice

Voice commands

Media voice commands are available

only with a USB connection.

commands

What's playing?

Voice commands

Help messages

"Telephone" voice

Turn on source radio - Streaming Bluetooth

To choose what you'd like to play, start by saying

commands

- …

"play" and then the item. For example, say "play

Help messages

If there is no telephone connected by

song Hey Jude", "play line 3" or "select line 2".

Bluetooth, a voice message announces:

You can undo your last action and start over

You can select an audio source by saying "turn

"Please first connect a telephone", and the

by saying "undo", or say "cancel" to cancel the

on source" followed by the device name. For

voice session is closed.

current action.

example, "turn on source, Streaming Bluetooth",

Voice commands

Voice commands

or "turn on source, radio". Use the command

"play" to specify the type of music you'd like to

Play song Hey Jude

Call David Miller*

hear. You can choose between "song", "artist",

Play artist Madonna

Call voicemail*

or "album". Just say something like "play artist,

Play album Thriller

Display calls*

Madonna", "play song, Hey Jude", or "play

Help messages

Help messages

album, Thriller".

Voice commands

I'm not sure what you'd like to play. Please say

To make a phone call, say "call" followed by

"play" and then a song title, an album title, or

the contact name, for example: "Call David

Tune to channel BBC Radio 2

an artist name. For example, say "play song

Miller". You can also include the phone type, for

Tune to 98.5 FM

Hey Jude", "play artist Madonna" or "play

example: "Call David Miller at home". To make

Tune to preset number five

album Thriller". To select a line number from the

a call by number, say "dial" followed by the

Help messages

display, say "select line two". To move around

phone number, for example, "Dial 107776 835

a displayed list, you can say "next page" or

417". You can check your voicemail by saying

You can pick a radio station by saying "tune to"

"previous page". You can undo your last action

"call voicemail". To send a text, say "send quick

and the station name or frequency. For example

and start over by saying "undo", or say "cancel"

message to", followed by the contact, and then

"tune to channel Talksport" or "tune to 98.5

to cancel the current action.

the name of the quick message you'd like to

FM". To listen to a preset radio station, say for

send. For example, "send quick message to

example "tune to preset number five".

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding

download has been performed.

262

CarManuals2.co

MyCitroën Drive

David Miller, I'll be late". To display the list of

From the list of quick messages, say the name of

Bill Carter, I'll be late". Check the phone menu

12

calls, say "display calls". For more information on

the one you'd like to send. To move around the

for the names of the supported messages.

SMS, you can say "help with texting".

list you can say "go to start", "go to end", "next

The system only sends pre-recorded

To choose a contact, say something like "select

page" or "previous page". You can undo your last

"Quick messages".

line three". To move around the list say "next

action and start over by saying "undo", or say

page" or "previous page". You can undo your last

"cancel" to cancel the current action.

action and start over by saying "undo", or say

Voice commands

Navigation

"cancel" to cancel the current action.

Send SMS to John Miller, I'm just arriving

"Text message" voice

Send SMS to David Miller at the office, don't

Choice of a destination

wait for me

commands

Help messages

To a new destination

If there is no telephone connected by

Intuitive method:

Bluetooth, a voice message announces:

Please say "call" or "send quick message to",

Press Navigation to display the main

"Please first connect a telephone", and the

and then select a line from the list. To move

page.

voice session is closed.

around a list shown on the display, you can

Press "Search…".

say "go to start", "go to end", "next page" or

The "Text messages" voice commands

"previous page". You can undo your last action

Enter an address or the key words for the

function allows you to dictate and send

and start over by saying "undo", or say "cancel"

destination.

an SMS.

to cancel the current action.

Press "OK" to select the "Guidance

Dictate the text, taking care to pause briefly

Voice commands

criteria".

between each word.

Or

When you have finished, the voice recognition

Listen to most recent message*

Guided method:

system will automatically generate an SMS.

Help messages

In order to be able to use the navigation,

Voice commands

To hear your last message, you can say "listen to

you must enter the "City", the "Street"

(suggestions are displayed automatically

most recent message". When you want to send

Send quick message to Bill Carter, I'll be late

a text, there's a set of quick messages ready for

when you begin typing), then enter the

Help messages

you to use. Just use the quick message name

"Number" using the virtual keypad, or select

and say something like "send quick message to

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding

download has been performed.

263

CarManuals2.co

MyCitroën Drive

an address from the "Contact" list or the

To a recent destination

To a contact

address "History".

Press Navigation to display the main

Press Navigation to display the main

page.

page.

If you do not confirm the number, the

Press the "MENU" button to access the

Press the "MENU" button to access the

navigation system will show one end of

secondary page.

secondary page.

the street.

Select "My destinations".

Select "My destinations".

Press the "MENU" button to access the

Select the "Recent” tab.

Select the "Contact” tab.

secondary page.

Select the address chosen in the list to display

Select a contact in the list to start guided

Select "Enter address".

the "Guidance criteria”.

navigation.

Press "OK" to start guided navigation.

Then

To points of interest (POI)

Select the "Country".

Guided method:

Select "Position" to see the point of

Points of interest (POI) are listed in different

Select the keyboard “language”.

arrival on the map.

categories.

Press Navigation to display the main

Change the keyboard "type" according to

To "Home" or "My work"

page.

the selected "language": ABCDE;

Press Navigation to display the main

Press the "MENU" button to access the

AZERTY; QWERTY or QWERTZ.

page.

secondary page.

Enter the "City", the "Street" and the

Press the "MENU" button to access the

Select "Points of interest".

"Number", and confirm by pressing on

the displayed suggestions.

secondary page.

Select "My destinations".

Select the "Travel", "leisure",

Press "OK" to select the "Guidance

"Commercial", "Public" or "Geographic”

criteria".

Select the "Preferred” tab.

tab.

And/or

Select "Home".

Or

Select "See on map" to choose the

Select "Search" to enter the name and

"Guidance criteria".

Or

address of a POI.

Press "OK" to start guided navigation.

Select "My work".

Press "OK" to calculate the route.

Zoom in/out using the touch buttons or

Or

Or

with two fingers on the screen.

Intuitive method:

Select a preset favourite destination.

264

CarManuals2.co

MyCitroën Drive

You can only select this method of

To a point on the map

A marker is displayed in the middle of the

12

using the service if a network connection

screen, with the "Latitude" and

Press Navigation to display the main

is active; this may be either a "network

"Longitude" coordinates.

page.

connection provided by the vehicle", if you

Choose the type of coordinates:

Explore the map by sliding a finger on the

use the Citroën Connect Box solution, or else

DMS for: Degrees, Minutes, Seconds.

screen.

a "network connection provided by the user"

DD for: Degrees, Decimals.

Select the destination by pressing on the map.

via a smartphone,

Press this button to start guided

Tap the screen to place a marker and

In both cases, the system is automatically

navigation.

display the sub-menu.

connected to the Internet, if network coverage

Or

Press this button to start guided

permits.

Press this button to save the displayed

navigation.

address.

Or

Press Navigation to display the main

OR

Press this button to save the displayed

page.

Press this button to enter the "Latitude"

address.

Press the "MENU" button to access the

value using the virtual keypad.

secondary page.

A long press on a point opens a list of

And

Select "Search".

nearby POIs.

Press this button to enter the "Longitude"

value using the virtual keypad.

Press on the mode shown in the bottom right of

the screen (On-Board or Connected) to change

To GPS coordinates

TMC (Traffic Message

the "Database".

Press Navigation to display the main

Channel)

Select the "Database" in "On-Board"

page.

mode (integrated into the map), or in

Explore the map by sliding a finger on the

Available in some countries.

"Connected" mode (connected to the Internet).

screen.

TMC (Traffic Message Channel) messages

Press the back arrow to confirm.

Touch the screen with a finger to go to the next

are based on a European standard for traffic

image.

information broadcasting via the RDS system on

Enter an address or the key words for the

Press this button to display the world

FM radio, sending traffic information in real time.

destination (POI).

map.

The TMC information is then displayed on a GPS

Press "OK" to start the search.

Using the grid, select the desired country or

Navigation system map and taken into account

region by zooming.

straight away when routes are calculated, to

Select the "On the route", "Around the

Press this button to display or enter the

avoid accidents, traffic jams and closed roads.

vehicle" or "At destination" tab to refine

GPS coordinates.

Danger zone alerts may or may not be

your search.

displayed, depending on the applicable

Select the desired address to calculate the route.

265

CarManuals2.co

MyCitroën Drive

legislation and subscription to the

update the smartphone operating system

Select the "Secured", "Not secured" or

corresponding service.

as well as the date and time on the

"Stored” tab.

smartphone and system, to ensure that the

Select a network.

communication process between the

Connected navigation

smartphone and the system functions

Using the virtual keypad, enter the "Key"

correctly.

network Wi-Fi and the "Password".

Press "OK" to establish a connection

Connected navigation

USB connection

between the smartphone and the

connection

Connect the USB cable.

vehicle’s system.

The smartphone charges when

Depending on version, vehicle trim level and

connected by the USB cable.

Usage restrictions:

subscription to online services and options.

Bluetooth connection

With CarPlay^®, connection sharing is only

Activate the Bluetooth function on the

available with a Wi-Fi connection.

Network connection provided by the

telephone and ensure that it is visible to

The quality of services depends on the quality

vehicle

all (see the "Connect-App" section).

of the network connection.

With the Citroën Connect Box solution,

Wi-Fi connection

the system is automatically connected to

Select a Wi-Fi network detected by the

the Internet and connected services, and does

Authorize sending

system and connect to it.

not require the user to provide a connection via

information

their smartphone.

This function is only available if it has

Press Settings to display the main page.

OR

been activated either via the

"Notifications" or via the "Applications" menu.

Press the "OPTIONS" button to access the

Network connection provided by the

Press "Notifications".

secondary page.

user

Select "System configuration".

Select Wi-Fi to activate it.

Select the "Private mode" tab.

For the list of compatible smartphones,

OR

visit the Brand's website in your country.

Press Connect-App to display the main

OR

page.

Press "Notifications".

Activate and enter settings for sharing the

Press the "OPTIONS" button to access the

smartphone connection.

secondary page.

Press "Private mode".

Select "Wi-Fi network connection".

As processes and standards are

THEN

constantly changing, we recommend you

266

CarManuals2.co

MyCitroën Drive

Activate or deactivate:

- "Give an audible warning".

Press Navigation to display the main

12

- "Advise proximity of POI 1".

page.

- "No data sharing except for company

- "Advise proximity of POI 2".

Press the "Declare a new danger zone"

vehicles".

Press “OK” to confirm your selection.

button located in the side bars or the

- "Only data sharing"

upper bar of the touch screen (depending on

- "Sharing data and vehicle position"

equipment).

The "Notifications", located in the upper

Select the "Type” option to select the type

bar, can be accessed at any time.

Settings specific to

of "Danger area".

Select the "Speed" option and enter it

connected navigation

Danger zone alerts may or may not be

using the virtual keypad.

Press Navigation to display the main

displayed, depending on the applicable

Press "OK" to save and send the

page.

legislation and subscription to the

information.

Press the "MENU" button to access the

corresponding service.

secondary page.

Displaying fuel information

Select "Settings".

When "TOMTOM TRAFFIC” appears, the

Press Navigation to display the main

services are available.

page.

Select the "Map” tab.

The services offered with connected

Press this button to display the list of

navigation are as follows.

services.

Activate or deactivate:

A Connected Services pack:

Press "POI on map" to display the list

- "Allow declaration of danger zones".

- Weather,

of points of interest.

- "Guidance to final destination on foot".

- Filling stations,

Press one of the buttons to search for

These settings must be configured for each

- Car park,

"Stations".

profile.

- Traffic,

Activate/deactivate "Stations".

Press “OK” to confirm your selection.

- POI local search.

A Danger area pack (optional).

Press this button to display a secondary

Select the "Alerts” tab.

page.

Select the "Settings” tab.

Activate or deactivate:

Declaration: "Risk areas

alert"

Select the desired fuel.

- "Advise of car park nearby".

- "Filling station alert".

To send information about danger zones,

Press "OK" to save.

- “Risk areas alert" then press the warning icon

select the option:Allow declaration of

(triangle) to configure the alerts.

danger zones

267

CarManuals2.co

MyCitroën Drive

Displaying charging station

Press this button to display basic

As principles and standards are constantly

information.

changing, we recommend keeping the

details

Press this button to display detailed

smartphone's operating system up-to-

Press Navigation to display the main

weather information.

date, together with the date and time on

page.

the smartphone and the system.

The temperature displayed at 6 a.m. will

Press this button to display the list of

be the maximum temperature for the day.

services.

The temperature displayed at 6 p.m. will be

Connectivity

Press "POI on map" to display the list

the minimum temperature for the night.

of points of interest.

Press Applications to display the main

Press one of the buttons to search for

page.

"Stations".

Press "Connectivity" to access the CarPlay^® or

Activate/deactivate "Stations".

Applications

Android Auto functions.

USB sockets

Press this button to display a secondary

CarPlay^® smartphone

page.

Depending on equipment, for more information

connection

Select the "Settings" tab.

on the USB sockets compatible with CarPlay^® or

Depending on country.

Android Auto applications, refer to the "Ease of

Select the desired connector type.

use and comfort" section.

On connecting the USB cable, the

CarPlay^® function deactivates the

For the list of compatible smartphones,

Press "OK" to save.

system's Bluetooth^® mode.

visit the Manufacturer's website in your

The "CarPlay" function requires the use of

country.

a compatible smartphone and compatible

Displaying weather

applications.

Synchronising a smartphone enables

information

users to display applications that support

Connect the USB cable. The smartphone

Press Navigation to display the main

the smartphone’s CarPlay^® or Android Auto

charges when connected by the USB

page.

technology on the vehicle’s screen. For

cable.

Press this button to display the list of

CarPlay^® technology, the CarPlay^® function

A message appears on the touch screen.

services.

must first be activated on the smartphone.

Read it and then confirm with the "Authorise"

Select "View map".

Unlock the smartphone for the communication

button.

process between the smartphone and the

Press "Telephone" to display the

Select "Weather".

system to work.

CarPlay^® interface.

Or

268

CarManuals2.co

MyCitroën Drive

Connect the USB cable. The smartphone

Press "Android Auto" to start the

Press "Connected Apps" to display the browser

12

charges when connected by the USB

application in the system.

home page.

cable.

During the procedure, several screen

Select the country of residence.

From the system, press "Applications" to

pages relating to certain features are

display the main page.

displayed.

Press "OK" to save and start the browser.

Press "Connectivity" to access the "CarPlay^®”

Accept to start and complete the connection.

function.

Access to the different audio sources remains

Connection to the internet is via one of

Press "CarPlay" to display the CarPlay^®

available in the margin of the Android Auto

the network connections provided by the

interface.

display, using the touch buttons located in the

vehicle or the user.

upper bar.

When the USB cable is disconnected

Access to the menus for the system is possible

and the ignition is switched off then back

at any time using the dedicated buttons.

Bluetooth connection^®

on, the system will not automatically switch to

Radio Media mode; the source must be

In Android Auto mode, the function that

The services available depend on the

changed manually.

displays rolling menus by briefly pressing

network, the SIM card and the

the screen with three fingers is disabled.

compatibility of the Bluetooth devices used.

Consult the smartphone user guide and the

Android Auto smartphone

There may be a pause before

service provider to check which services are

connection

applications become available,

available.

Depending on country.

depending on the quality of the network.

Install the "Android Auto" application on

The Bluetooth function must be activated

the smartphone via "Google Play".

Car Apps

and the smartphone configured as

The "Android Auto" function requires the use

"Visible to all".

Press Applications to display the main

of a compatible smartphone and compatible

page.

To complete the pairing, whichever procedure is

applications.

Press "Car Apps" to display the applications

used (from the smartphone or from the system),

home page.

ensure that the code is the same in the system

Connect the USB cable. The smartphone

charges when connected by the USB

and in the smartphone.

Internet Browser

cable.

If the pairing procedure fails, we

Press Applications to display the main

From the system, press "Applications" to

recommend deactivating and then

page.

display the main page.

reactivating the Bluetooth function on the

Press "Connectivity" to access the "Connected

Press "Connectivity" to access the "Android

smartphone.

Apps” function.

Auto” function.

269

CarManuals2.co

MyCitroën Drive

Procedure from the smartphone

the vehicle does not have "Emergency and

Press Connect-App to display the main

Select the name of the system in the list

assistance call" services), after first activating

page.

of detected devices.

smartphone connection sharing.

Press the "OPTIONS" button to access the

In the system, accept the connection request

secondary page.

Select one or more profiles.

from the smartphone.

Select "Share Wi-Fi connection".

Press "OK" to confirm.

Procedure from the system

Select the "Activation" tab to activate or

Press Connect-App to display the main

deactivate Wi-Fi connection sharing.

page.

And/or

Wi-Fi connection

Press the "OPTIONS" button to access the

Select the "Settings" tab to change the system’s

Network connection via the smartphone's Wi-Fi.

network name and password.

secondary page.

Press Connect-App to display the main

Press "OK" to confirm.

Press "Bluetooth connection".

page.

Press the "OPTIONS" button to access the

Select "Search".

To protect against unauthorised access

secondary page.

The list of detected smartphones is

and to make all systems as secure as

Select "Wi-Fi network connection".

displayed.

possible, the use of a security code or a

Select the name of the chosen

complex password is recommended.

Select the "Secured", "Not secured" or

smartphone in the list.

"Stored” tab.

Depending on the type of smartphone,

Select a network.

Managing connections

you may by prompted to accept the

Press Connect-App to display the main

transfer of contacts and messages.

Using the virtual keypad , enter the Wi-Fi

page.

network "Key" and "Password".

Press the "OPTIONS" button to access the

Press "OK" to establish the connection.

Connection sharing

secondary page.

The system offers to connect the smartphone

Select "Manage connection".

with 3 profiles:

The Wi-Fi connection and Wi-Fi

- "Telephone" (hands-free kit, telephone only),

connection sharing are exclusive.

With this function, you can view the access to

- “Streaming" (streaming: wireless playing of

connected services, the availability of connected

audio files on the smartphone),

services and modify the connection mode.

Wi-Fi connection sharing

- "Mobile internet data".

Depending on equipment.

The "Mobile internet data" profile must

Creation of a local Wi-Fi network by the system.

be activated for connected navigation (if

270

CarManuals2.co

MyCitroën Drive

This phenomenon is perfectly normal in the

Press "OK" to confirm.

Radio

12

context of radio wave transmission, and

in no way indicative of an audio system

Selecting a station

RDS station tracking may not be

malfunction.

available nationwide, as many radio

Press Radio Media to display the main

stations do not cover 100 % of the country.

page.

Presetting a station

This explains the loss of reception of the

Press "Frequency".

station during a journey.

Press one of the buttons to perform an

Select a radio station or frequency.

automatic search for radio stations.

(refer to the corresponding section)

Or

Press "Presets".

Displaying text information

Move the slider to manually search for

Make a long press on one of the buttons

The "Radio Text" function displays information

frequencies up or down.

to preset the station.

transmitted by the radio station relating to the

Or

station or the currently playing song.

Press Radio Media to display the main

Changing the waveband

Press Radio Media to display the main

page.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

page.

Press the "OPTIONS" button to access the

secondary page.

To change the waveband, press "Band…",

secondary page.

Select "Radio stations" on the secondary

displayed at the top right of the screen.

Select "Radio settings".

page.

Press "Frequency".

Activating/Deactivating RDS

Select "General".

Enter the values using the virtual keypad.

RDS, if activated, allows you to continue

Activate/deactivate "Display radio text".

First enter the units then click on the

listening to the same station by automatic

decimals field to enter the figures after the

retuning to alternative frequencies.

Press "OK" to confirm.

decimal point.

Press Radio Media to display the main

Press "OK" to confirm.

page.

Press the "OPTIONS" button to access the

Playing TA messages

secondary page.

Radio reception may be affected by the

The TA (Traffic Announcement) function gives

Select "Radio settings".

use of electrical equipment not approved

priority to TA alert messages. To operate, this

by the Brand, such as a USB charger

function needs good reception of a radio station

Select "General".

connected to the 12 V socket.

that carries this type of message. While traffic

Activate/deactivate "Station follow".

The exterior environment (hills, buildings,

information is being broadcast, the current

tunnels, basement car parks, etc.) may

media is automatically interrupted so that the

block reception, including in RDS mode.

271

CarManuals2.co

MyCitroën Drive

TA message can be heard. Normal play of the

Press Radio Media to display the main

Media

previously playing media resumes at the end of

page.

the message.

Press the "OPTIONS" button to go to the

USB port

Select "Announcements".

secondary page.

Activate/deactivate "Traffic

Select "Radio settings".

Insert the USB memory stick into the USB

announcement".

port or connect the USB device to the

Press "OK" to confirm.

Select "General".

USB port using a suitable cable (not supplied).

Activate/deactivate "FM-DAB Follow-up".

To protect the system, do not use a USB

hub.

Activate/deactivate "Station follow".

DAB (Digital Audio

The system builds playlists (in temporary

Broadcasting) radio

Press "OK".

memory); this operation can take from a

few seconds to several minutes at the first

Terrestrial Digital Radio

connection.

If "FM-DAB auto tracking" is activated,

Reduce the number of non-music files and the

there may be a time lag of a few seconds

Terrestrial Digital Radio

number of folders to reduce the waiting time.

when the system switches to "FM" analogue

Digital radio provides higher quality sound.

Playlists are updated whenever the ignition

radio, and in some cases a change in volume.

The various "multiplexes/ensembles" offer a

is switched off or a USB memory stick is

When the digital signal quality is restored, the

choice of radio stations organised in alphabetical

connected. The audio system memorises these

system automatically changes back to "DAB".

order.

lists, which will subsequently load faster if they

To minimise this time lag, storing radio

Press Radio Media to display the main

have not been changed.

stations in the "DAB" band is recommended.

page.

Press “Band …" at the top right of the screen to

Auxiliary socket (AUX)

If the "DAB" station being listened to is

display the "DAB" waveband.

Depending on equipment

not available on "FM" ("FM-DAB" greyed

Connect a portable device (MP3 player,

FM-DAB tracking

out), or "FM-DAB auto tracking" is not

etc.) to the auxiliary jack socket using an

activated, the sound will cut out when the

"DAB" does not cover 100% of the territory.

audio cable (not supplied).

digital signal becomes too weak.

When the digital radio signal is poor,

This source is only available if "Auxiliary input"

“FM-DAB auto tracking" enables you to continue

has been selected in the audio settings.

listening to the same station by automatically

First adjust the volume on the portable device

switching to the corresponding FM analogue

(to a high level). Then adjust the volume of the

station (if there is one).

audio system.

Controls are managed via the portable device.

272

CarManuals2.co

MyCitroën Drive

Selecting the source

If play does not start automatically, it may be

Information and advice

12

necessary to start the audio playback from the

Press Radio Media to display the main

The system supports USB mass storage

smartphone.

page.

devices, BlackBerry^® devices and Apple^® players

Control is from the portable device or by using

Select "SOURCES".

via the USB ports. The adapter cable is not

the system's touch buttons.

Select the source.

supplied.

Once connected in streaming mode, the

Devices are managed using the audio system

Watching a video

smartphone is considered to be a media

controls.

Depending on equipment/Depending on version/

source.

Other devices, not recognised on connection,

Depending on country.

must be connected to the auxiliary socket using

Insert a USB memory stick in the USB port.

a jack cable (not supplied) or via Bluetooth

Connecting Apple^® players

streaming, if compatible.

Video control commands are accessible

Connect the Apple^® player to the USB port using

The audio system will only play audio files with

only through the touch screen.

a suitable cable (not supplied).

".wma", ".aac", ".flac", ".ogg" and ".mp3" file

Play starts automatically.

extensions, at bit rates between 32 Kbps and

Press Radio Media to display the main

Control is via the audio system.

320 Kbps.

page.

It also supports VBR (Variable Bit Rate) mode.

Select "SOURCES".

The classifications available are those of

No other file types (".mp4", etc.) can be read.

Select Video to start the video.

the portable device connected (artists/

All ".wma" files must be standard WMA 9 files.

albums/genres/playlists/audio books/

The supported sampling rates are 32, 44 and

To remove the USB memory stick, press

podcasts).

48 KHz.

the pause button to stop the video, then

The default classification used is by artist. To

To avoid reading and display problems, we

remove the memory stick.

modify the classification used, return to the

recommend choosing file names less than 20

The system can play video files in the MPEG-4

first level of the menu then select the desired

characters long that do not contain any special

Part 2, MPEG-2, MPEG-1, H.264, H.263, VP8,

classification (playlists for example) and

characters (e.g. “ ? . ; ù).

WMV and RealVideo formats.

confirm to go down through the menu to the

Use only USB memory sticks in FAT32 format

desired track.

Streaming Bluetooth^®

(File Allocation Table).

The version of software in the audio system may

Streaming allows you to listen to the audio feed

We recommend using the original USB

not be compatible with the generation of the

from your smartphone.

cable for the portable device.

Apple^® player.

The Bluetooth profile must be activated.

First adjust the volume on the portable device (to

a high level).

Then adjust the volume of the audio system.

273

CarManuals2.co

MyCitroën Drive

Procedure from the system

The ability of the system to connect just

Telephone

Press Telephone to display the main

one profile depends on the telephone.

page.

All three profiles may connect by default.

Pairing a Bluetooth^®

Press "Bluetooth search".

telephone

The profiles compatible with the system

Or

are: HFP, OPP, PBAP, A2DP, AVRCP,

The services available depend on the

Select "Search".

MAP and PAN.

network, the SIM card and the

The list of detected telephones is

compatibility of the Bluetooth^® devices used.

Visit the Brand's website for more information

displayed.

Consult the telephone user guide and the

(compatibility, additional help, etc.).

Select the name of the chosen telephone

service provider to check which services are

in the list.

available.

Automatic reconnection

Connection sharing

On returning to the vehicle, if the last telephone

The Bluetooth^® function must be

connected is present again, it is automatically

The system offers to connect the telephone with

activated and the telephone configured

recognised and within about 30 seconds

3 profiles:

as "Visible to all” (in the telephone settings).

after switching on the ignition, the pairing is

- "Telephone" (hands-free kit, telephone only),

established automatically (Bluetooth activated).

- “Streaming" (streaming: wireless playing of

To complete the pairing, whichever procedure is

To modify the connection profile:

audio files on the telephone),

used (from the telephone or from the system),

Press Telephone to display the main

- "Mobile internet data".

ensure that the code is the same in the system

page.

and in the telephone.

The "Mobile internet data" profile must

Press the "OPTIONS" button to access the

be activated for connected navigation,

secondary page.

If the pairing procedure fails, we

after first activating smartphone connection

Select "Bluetooth connection" to display

recommend deactivating and then

sharing.

the list of paired devices.

reactivating the Bluetooth^® function on the

telephone.

Press the "Details" button.

Select one or more profiles.

Select one or more profiles.

Procedure from the telephone

Press "OK" to confirm.

Select the system name in the list of

Press "OK" to confirm.

Depending on the type of telephone, you may by

detected devices.

prompted to accept the transfer of contacts and

In the system, accept the connection request

messages.

from the telephone.

274

CarManuals2.co

MyCitroën Drive

Managing paired telephones

Select "End call" on the touch screen.

Calling a recently used

12

This function lets you connect or disconnect a

number

device or delete a pairing.

Making a call

Press Telephone to display the main

Press Telephone to display the main

page.

page.

Using the telephone is strongly

Or

Press the "OPTIONS" button to access the

discouraged while driving.

Press and hold

secondary page.

Park the vehicle.

Select "Bluetooth connection" to display

Make the call using the steering-mounted

the steering mounted telephone button.

the list of paired devices.

controls.

Press on the name of the telephone

Select "Calls".

selected in the list to disconnect it.

Select the desired contact from the displayed list.

Press again to connect it.

Calling a new number

Press Telephone to display the main

It is always possible to make a call

Deleting a telephone

page.

directly from the telephone; as a safety

Select the basket at top right of the

Enter the phone number using the digital

measure, first park the vehicle.

screen to display a basket alongside the

keypad.

telephone chosen.

Press "Call" to start the call.

Managing contacts/entries

Press the basket alongside the telephone

chosen to delete it.

Press Telephone to display the main

Calling a contact

page.

Receiving a call

Select "Contact".

Press Telephone to display the main

An incoming call is announced by a ring and a

page.

Select "Create" to add a new contact.

superimposed display in the screen.

Or press and hold

Make a short press on the steering

Press the "Telephone" tab to enter the

mounted telephone button to accept an

the steering mounted telephone button.

contact’s telephone number(s).

incoming call.

Press the "Address" tab to enter the

And

Select "Contact".

contact’s address(es).

Make a long press

Select the desired contact from the displayed list.

Press the "Email" tab to enter the

contact’s email address(es).

Select "Call".

on the steering mounted telephone button

Press "OK" to save.

to reject the call.

Or

275

CarManuals2.co

MyCitroën Drive

Press this button to sort contacts by

Managing quick messages

Access to email messages depends on

Surname+first name or by First

the compatibility between the

Press Telephone to display the main

name+surname.

smartphone and the onboard system.

page.

The "Email" function allows email

Press the "OPTIONS" button to access the

addresses to be entered for a contact,

secondary page.

but the system is not able to send emails.

Select "Quick messages" to display the

Settings

list of messages.

Select the "Delayed", "My arrival", "Not

Audio settings

Managing messages

available" or "Other" tab, enabling you to

Press Settings to display the main page.

Press Telephone to display the main

create new messages.

page.

Press "Create" to write a new message.

Select "Audio settings".

Press the "OPTIONS" button to access the

secondary page.

Select the message chosen in one of the

Then select "Ambience", "Position", "Sound",

Select "Messages" to display the list of

lists.

"Voice" or "Ringtone".

messages.

Press "Transfer" to select one or more

Press "OK" to save the settings.

Select the "All", "Incoming" or "Sent”

recipients.

tab.

Press "Play" to start playing the message.

Select the details of the message chosen

The balance/distribution (or spatialisation

in one of the lists.

Press "Answer" to send a quick message

Managing email

processing to adjust the sound quality

stored in the system.

according to the number of passengers in the

Press Telephone to display the main

Press "Call" to start the call.

vehicle.

page.

Available only with the front and rear speaker

Press the "OPTIONS" button to access the

Press "Play" to listen to the message.

configuration.

secondary page.

Select "Email" to display the list of

messages.

The Ambience setting (choice of 6

Access to "Messages" depends on the

Select the "Incoming", "Sent" or "Not

ambiances) as well as for Bass, Medium

compatibility between the smartphone

read” tab.

and Treble are different and independent for

and the onboard system.

Select the message chosen in one of the lists.

each audio source.

Some smartphones retrieve messages or

Press "Play" to start playing the message.

Activate or deactivate "Loudness".

email messages more slowly than others.

276

CarManuals2.co

MyCitroën Drive

The "Position" settings (All passengers,

Press "OK" again to save the settings.

Move the slider to adjust the brightness of

12

Driver and Front only) are common to all

the screen and/or the instrument panel.

sources.

Press Settings to display the main page.

The location for the photograph is

Activate or deactivate "Touch tones",

square; the system reshapes the original

"Volume linked to speed" and "Auxiliary

Press the "OPTIONS" button to access the

photograph if in another format.

input".

secondary page.

Press this button to reset the selected

Select "System settings".

profile.

optimises the sound distribution inside

Select "Units" to change the units of distance,

Resetting the selected profile activates

the passenger compartment.

fuel consumption and temperature.

the English language by default.

Select "Factory settings" to restore the initial

settings.

Select a "Profile" (1 or 2 or 3) to link "Audio

Configuring profiles

settings" with it.

Resetting the system to "Factory

Press Settings to display the main page.

Select "Audio settings".

settings" activates English and degrees

Fahrenheit and deactivates summer time.

Press the "OPTIONS" button to access the

Then select "Ambience", "Position"; "Sound",

secondary page.

Select "System info" to display the versions of

"Voice" or "Ringtone".

Select "Setting of the profiles".

the various modules installed in the system.

Press "OK" to save the selected profile’s

settings.

Select "Profile 1", "Profile 2", "Profile 3” or

Selecting the language

"Common profile".

Modifying system settings

Press Settings to display the main page.

Press this button to enter a name for the

Press Settings to display the main page.

profile using the virtual keypad.

Press the "OPTIONS" button to access the

Press "OK" to confirm.

Press the "OPTIONS" button to access the

secondary page.

secondary page.

Select "Languages" to change the

Press this button to add a photograph to

Select "Screen configuration".

language.

the profile.

Insert a USB memory stick containing the

Setting the date

Select "Animation".

photograph in the USB port.

Activate or deactivate:Automatic

Press Settings to display the main page.

Select the photograph.

scrolling

Press "OK" to accept the transfer of the

Select "Brightness".

Press the "OPTIONS" button to access the

photograph.

secondary page.

277

CarManuals2.co

MyCitroën Drive

Select "Setting the time-date".

Press "OK" to confirm.

Navigation

I cannot enter the navigation address.

Select "Date".

The system may not automatically

The address is not recognised.

Press this button to set the date.

manage the change between winter and

► Use the "intuitive method" by pressing

summer time (depending on the country of

the "Search…" button at the bottom of the

Press "OK" to confirm.

sale).

"Navigation” page.

The route calculation is not successful.

Select the display format for the date.

The route settings may conflict with the current

Colour schemes

location (for example, if toll roads are excluded

Time and date setting is only available if

Depending on equipment/Depending on version.

but the vehicle is on a toll road).

"GPS synchronisation" is deactivated.

► Check the route settings in the "Navigation"

As a safety measure, the procedure for

menu.

changing the colour scheme is only

I am not receiving "Danger zone" alerts.

possible when the vehicle is stationary.

Setting the time

You have not subscribed to the online services

Press Settings to display the main page.

Press Settings to display the main page.

option.

► If you have subscribed to the option:

Press the "OPTIONS" button to access the

Select "Color schemes".

- a few days may elapse before the service is

secondary page.

activated,

Select "Setting the time-date".

Select a colour scheme in the list then

- services may not be selected in the system

press "OK" to confirm.

menu,

Select "Time".

- online services are not active ("TOMTOM

Whenever the colour scheme is

Press this button to set the time using the

TRAFFIC" not shown on the map).

changed, the system restarts, temporarily

virtual keypad.

The POIs do not appear.

displaying a black screen.

Press "OK" to confirm.

The POIs have not been selected.

► Set the zoom level to 200 metres (656 ft), or

Press this button to set the time zone.

select POIs from the POI list.

Frequently asked

The "Danger zone" audible warning feature is

Select the display format for the time

not working.

questions

(12h/24h).

The audible warning is not active or the volume

Activate or deactivate summer time (+1

The following information groups together the

is too low.

hour).

answers to the most frequently asked questions

Activate or deactivate GPS

concerning the system.

synchronisation (UTC).

278

CarManuals2.co

Content      ..     6      7      8      9     ..