Skoda Citigo (2019 year). Instruction - part 4

 

  Index      Skoda     Skoda Citigo (2019 year) - instruction in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..

 

 

Skoda Citigo (2019 year). Instruction - part 4

 

 

Storage compartment on the front passenger side - variant 2

Fig. 71  Open storage compartment / interior of the storage compart-

ment

Read and observe   and   on page 53 first.

Storage compartment 

» Fig. 71

Opening lever
Glasses storage box
Notepad holder
Pen holder
Card holder
Coin holder

Open/close

If there is a folding hook 

» Fig. 73

 on page 58on the handle 

A

 

» Fig. 71

, re-

move any items hanging from it.

To open, pull the opening lever 

A

 in the direction of arrow 

1

. The cover

folds in the arrow direction 

2

.

To close, screw in the lid in the opposite direction of arrow 

2

 until it audibly

clicks into place.

A
B
C
D

E
F

Storage compartment for an umbrella

Fig. 72 

Storage compartment for the

umbrella

Read and observe   and   on page 53 first.

The storage compartment under the passenger seat 

» Fig. 72

is used for stor-

ing an umbrella.

Foldable hook

Fig. 73 

Fold down hook

Read and observe   and   on page 53 first.

The folding hook is intended to be used for holding small items of luggage (e.g.

bags or similar).

To use it, pull down the hook in the direction of the arrow 

» Fig. 73

.

The maximum permissible load on the hook is 1.5 kg.

Note

When the hook is folded forward, it folds back automatically when the storage

compartment is opened.

58

Using the system

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Clothes hook

Fig. 74 

Clothes hooks

Read and observe   and   on page 53 first.

The clothes hooks are located on the centre door bars of the vehicle 

» Fig. 74

.

The maximum permissible load of each of the hooks is 2 kg.

WARNING

Never leave any heavy or sharp-edged objects in the pockets of the items

of clothing hung up - danger of injury.

Do not use hangers to hang up the clothes - there is a risk of restricting

the effectiveness of head airbags and a danger of injury from the hanger.

Make sure that any clothes hanging from the hooks do not impede your

vision.

Storage pockets on the inner sides of the front seats

Fig. 75 

Storage pocket

Read and observe   and   on page 53 first.

The storage pockets are located on the inside of the front seats 

» Fig. 75

 and

are used to store small and light objects (e.g. mobile phones).

The maximum permissible load for each of the pockets is 150 g.

Storage compartments in front of the rear seats

Fig. 76 

Storage compartment

Read and observe   and   on page 53 first.

The open storage compartments 

A

 are located on the backs of the front

seats 

» Fig. 76

.

Phone bracket

Introduction

In the telephone bracket, a telephone (or similar device) which is 122x56 mm

to 164x83 mm can be transversely mounted.
The maximum permissible load of the compartment is 200 g.

WARNING

Never work with the device when driving –There is a risk of accident!

CAUTION

Never exceed the maximum permissible load of the bracket- there is a risk of

damage or functional impairment.

Make sure that no liquid or moisture gets into the opening for the fixture -

There is a risk of damage to the vehicle’s electrical system.

Use a dry cloth to clean the adapter and the bracket.

59

Useful features

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Securing/removing the bracket

Fig. 77  Insert bracket into the adapter / remove bracket from the

adapter

Read and observe   and   on page 59 first.

to Fixing the bracket to the adapterinsert the bracket

A

 into the supports

B

 in direction of arrow 

1

until it clicks 

» Fig. 77

.

To remove the holder from the adapter press the lever 

C

 in direction of ar-

row 

2

 press and remove the bracket 

A

 in direction of arrow 

3

.

Securing/removing the adapter

Fig. 78  Remove cover/ attach adapter / remove adapter

Read and observe   and   on page 59 first.

Attach adapter

For example, insert a coin into the opening

A

 and lift up cover in direction of

arrow 

1

 

» Fig. 78

.

Insert the adapter into the opening in the panel and push in the direction of

arrow 

2

 until it clicks.

Remove adapter

Push the release button

B

 in the direction of arrow 

3

 and remove the

adapter in the direction of arrow 

4

» Fig. 78

.

Seal the opening in the dashboard with the cover.

WARNING

An incorrectly mounted adapter can break loose from the dashboard in

sudden manoeuvre or an accident - there is risk of injury!

Inserting / removing phone

Fig. 79  Inserting phone / Removing phone

Read and observe   and   on page 59 first.

Inserting phone

Insert the phone between the arms 

A

move them in the direction of arrows

1

 and secure the phone by doing so 

» Fig. 79

.

Secure the phone by moving the arm 

B

 in direction of arrow 

2

.

Removing phone

Press The key 

C

 in direction of arrow 

3

 the arm 

B

 moves into the starting

position in the direction of arrow 

4

 

» Fig. 79

.

Remove the phone from the bracket.

To adjust the lower arms to the starting position, lift the holder with the

adapter of the panel and press the button 

D

.

60

Using the system

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Transport of cargo

Luggage compartment and transporting objects

Introduction

When transporting heavy objects, the driving characteristics change due to

the shift in centre-of-gravity. Therefore, adjust the speed and driving mode ac-

cordingly.

When transporting cargo the following instructions must be adhered to

Distribute the load evenly in the luggage compartment and secure it with

suitable lashing straps to the lashing eyes or fixing nets so that they cannot

slip.

Place heavy objects as far forward in the luggage compartment as possible.

Tyre pressure should be adjusted for the load.

In the event of an accident, even small and light objects gain so much kinetic

energy that they can cause severe injuries.
The magnitude of the kinetic energy is dependent on the speed at which the

vehicle is travelling and the weight of the object.

Luggage compartment light

The light switches on/off when the luggage compartment lid is opened or

closed.
If the boot lid is open and the ignition switched off, the light will go out auto-

matically after 10 minutes.

WARNING

Never exceed the maximum permissible load of the respective fasteners,

nets, hooks etc. If heavy objects have not been suitably secured, there is a

risk of injury!

An unsecured dirt or improperly attached load could slip during a sudden

manoeuvre or in an accident - danger of injury!

Loose cargo could hit a deployed airbag and injure occupants – danger of

death!

When transporting loads in the luggage compartment that has been en-

larged by folding one of the rear seats forward, care should be taken to en-

sure the safety of passengers transported on the other rear seat.

CAUTION

Never exceed the maximum permissible load for the respective fasteners,

nets, hooks etc. - these could be damaged.

Please ensure that the heating elements for the rear window heater are not

damaged as a result of abrasive objects.

Do not place any sharp objects in the nets in the luggage compartment -

there is a risk of damage to the nets.

Fasteners

Fig. 80 

Fasteners

Read and observe   and   on page 61 first.

The fasteners are located on both sides of the luggage compartment.
Overview of the fastening elements 

» Fig. 80

Fasteners only for fastening fixing nets
Hooks for hanging small items of luggage (e.g. bags)
Lashing eye for fastening the load

The maximum static load for each hook 

B

 is 1.5 kg and the individual lashing

eyes 

C

 is 350 kg.

WARNING

Do not use hook 

B

 

» Fig. 80

 to lash down any objects - there is a risk of

damage to the hook during sudden braking or a vehicle collision.

A
B
C

61

Transport of cargo

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Fixing nets

Fig. 81  Example of how to fix nets/fastening details for the rear area of

the luggage compartment

Fig. 82  Details of the fastening behind the rear seats

Read and observe   and   on page 61 first.

Fastening examples for nets 

» Fig. 81

 and 

» Fig. 82

cross bags
Fastening details in the rear area of the luggage compartment
Details of the fastening to the upper lashing eyes behind the foldable rear

seat rest
Details of the fastening to the lashing eyes on the luggage compartment

floor behind the rear seats

The maximum permissible load for each of the nets is 1.5 kg.

Luggage compartment cover

Fig. 83  Remove the luggage compartment cover

Read and observe   and   on page 61 first.

If the support straps 

A

 

» Fig. 83

 are attached to the boot lid, then opening the

lid will raise the boot lid cover (hereafter referred to as cover).

Fold up and lock

Raise the cover and bolt it down 

» Fig. 83

 on both sides of the boot lid in the

studs 

B

.

Unlocking

Fold the raised cover down. The cover is released from the studs 

B

 

» Fig. 83

.

Removal

On both sides of the boot lid unhook the straps 

A

 in the direction of arrow

1

 

» Fig. 83

.

Press down on both sides on the underside of the cover to free them from

the studs 

C

.

Take out the cover in the direction of arrow 

2

.

Inserting

Position the fixtures 

D

 on the cover over the studs 

C

 

» Fig. 83

.

Press down on both sides on the top of the cover in the area of the studs 

C

.

The fixtures 

D

 must lock into place in the studs 

C

 on both sides of the lug-

gage compartment.

On both sides of the boot lid unhook the straps 

A

.

62

Using the system

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

Do not place any objects on the cover during the trip - risk of injury if

braking suddenly or colliding!

Never ride with the cover up - risk of damage to the cover.

Variable loading floor

Fig. 84  Variable loading floor in the raised position: raise / raised

Fig. 85  Variable loading floor: lower / lowered

Read and observe   and   on page 61 first.

To raise the loading floor, grasp handle 

A

 and raise as far as the stop in the

direction of arrow 

1

 

» Fig. 84

.

To lower it, lift the loading floor, push it into the grooves in the direction of

arrow 

2

 insert and lay it on the luggage compartment floor in direction of

arrow 

3

.

Class N1 vehicles

Read and observe   and   on page 61 first.

In class N1 vehicles that are not fitted with a protective grille, a lashing set that

complies with the EN 12195 standard (1-4) must be used for fastening the load.
For safe vehicle operation, the proper functioning of the electrical installation

is essential. It is important to ensure that it is not damaged in adaptation as

well as the loading and unloading of the cargo space.

Transportation on the roof rack

Fig. 86  Attachment points - 3-door

Fig. 87  Attachment points - 5-door

The attachment points 

A

 and 

B

 are located on both sides of the vehicle

» Fig. 86

 and 

» Fig. 87

.

The basic carrier should be mounted and dismounted in accordance with the

instructions provided.

63

Transport of cargo

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Roof load

The maximum permitted weight of the load incl. carriers is 50 kg.

WARNING

The following instructions must be observed to aid road safety when trans-

porting cargo on the roof rack.

Always distribute the load on the roof rack evenly and secure properly

with suitable lashing straps or tensioning straps.

When transporting heavy objects or objects which take up a large area on

the roof rack system, the handling of the car may change as a result of the

displacement of the centre of gravity. The style of driving and speed must

therefore be adapted to the current circumstances.

The permissible roof load, permissible axle loads and permissible total ve-

hicle weight must not be exceeded under any circumstances – risk of acci-

dent!

CAUTION

Make sure that the panoramic tilt / slide sunroof or the boot lid does not col-

lide with the roof load when opened.

Ensure the roof aerial is not impaired by the load being transported.

Note

We recommend that you use a roof rack from ŠKODA Original Accessories.

Heating and ventilation

Heating, instruction air conditioning system, Climatronic

Introduction

The heater heats and ventilates the vehicle interior. The air conditioning sys-

tem also cools and dehumidifies the vehicle interior.
The heating effect is dependent upon the coolant temperature, thus full heat

output only occurs when the engine has reached its operating temperature.
The cooling system works under the following conditions.

The cooling system is switched on.
The engine is running.
The outside temperature is above 2 °C.
The blower is switched on.

When the cooling system is switched on, it prevents misting of the windscreen

and windows.
It is possible to boost the effectiveness of the cooling system by briefly acti-

vating the air recirculation system

» page 67

.

Health protection

To reduce health risks (e.g. common colds), the following instructions for the

use of the cooling system are to be observed.

The difference between the outside temperature and the inside temperature

should not be greater than 5 °C.

The cooling system should be turned off about 10 minutes before the end of

the journey.

Once a year, a disinfection of the air conditioner is to be carried out by a spe-

cialist company.

WARNING

The blower should always be on to prevent the windows from misting.

Otherwise there is a risk of accident.

Under certain circumstances, air at a temperature of about 5 °C can flow

out of the vents when the cooling system is switched on.

64

Using the system

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Note

The air inlet in front of the windscreen must be free of e.g. ice, snow or

leaves to ensure that the heating and cooling system operates properly.

After switching on the cooling Condensation from the evaporator of the air

conditioning may drip down and form a puddle below the vehicle. This is not a

leak!

If the coolant temperature is too high, the cooling system is switched off to

ensure that the engine cools down.

Heating and instruction air conditioning

Fig. 88  Heating Controls

Fig. 89  Controls of the air conditioning

Read and observe   on page 64 first.

Individual functions can be set or switched on by turning the control dial and

pressing the appropriate button 

» Fig. 88

 and 

» Fig. 89

. When the function is

switched on, the indicator light in the button lights up.

Setting temperature

 Reduce the temperature/

 Increase the temperature

Setting the fan speed (level 0: blower off, level 4: highest speed)
Set the direction of the air outlet 

» page 67

 Air flow to the windows

 Air flow to the upper body

 Air flow in the footwell

 Air flow to the windows and the footwell

Recirculated air mode

 Switching on

 Switching off

Switching the cooling system on/off

Information on the cooling system

After pressing the button  the indicator light on the button lights up, even if

not all the conditions for the cooling system have been met. The cooling sys-

tem starts to work as soon as the following conditions have been met

» page 64

.

Note

In order to ensure adequate warmth and comfort, the operation of the air con-

ditioning may lead to an increase in the engine idle speed.

A

B
C

D



65

Heating and ventilation

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Climatronic (automatic air conditioning)

Fig. 90  Controls the Climatronic

Read and observe   on page 64 first.

Individual functions can be set or switched on by pressing the corresponding

button 

» Fig. 90

. When this function is switched on, the corresponding icon

appears in the display.

Setting temperature

 Increase the temperature / 

 Reduce the temperature

Selected temperature
Temperature units (degrees Celsius / Fahrenheit)
Intensive air flow to the windscreen switched on
Recirculated air mode activated
Direction of air flow
Automatic operation of the air conditioning system is switched on
Cooling system activated
Set blower speed
Adjust the blower speed

 Increase speed

 Reduce speed up to turning off the Climatronic

Interior temperature sensor

Switching on/off the intensive windscreen air flow - when this function

is switched on, the warning light illuminates in the button
Switch recirculation on/off 

» page 67

Switching the airflow to the windows on and off

1

2
3
4
5
6
7
8
9

10

11

Switching the airflow to the upper body on and off
Switching the airflow to the footwell on and off

Switching automatic mode on

Switching the cooling system on/off

After the cooling system is switched off, only the ventilation function remains

active whereby the minimum temperature that can be reached is the outside

temperature.

Setting temperature

In the range between 16 °C to 29 °C, an automatic temperature control takes

place.
At a temperature setting below 16 ° C,  lights up in the temperature display,

the Climatronic functions with maximum cooling performance.
At a temperature setting above 29 °C,  lights up in the temperature display,

the Climatronic functions with maximum heating output.

CAUTION

Do not cover the interior temperature sensor 

11

 

» Fig. 90

 - the function of the

Climatronic could be affected.

Note

In order to ensure adequate thermal comfort, there may be an increase in en-

gine idle speed during operation of the Climatronic in some circumstances.

Climatronic - automatic operation

Read and observe   on page 64 first.

The automatic mode is used in order to maintain a constant temperature and

to demist the windows in the interior of the car.

To switch on press the  button. The display shows  (pos. 

7

 

» Fig. 90

on page 66).

To turn off, press any button for the air distribution or change the blower

speed. However, temperature regulation is continued.





66

Using the system

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Recirculation

Read and observe   on page 64 first.

The recirculation mode prevents contaminated outside air getting into the in-

terior of the vehicle. In recirculated air mode air is sucked out of the interior of

the vehicle and then fed back into the interior.

To the turn on move the slider 

D

 into position  or press the button  in

Climatronic.

To turn off move the slider 

D

 into position  or press the button  in Cli-

matronic.

WARNING

The recirculation system cannot be switched on for a longer period of time,

because no fresh air is fed through from the outside. “Stale air” may result

in fatigue in the driver and occupants, reduce attention levels and also

cause the windows to mist up. As soon as windows mist up, turn on the re-

circulation system immediately - risk of accident!

CAUTION

We recommend not smoking in the vehicle when the recirculating air opera-

tion is switched on. The smoke sucked from the interior is deposited on the

evaporator of the air conditioner. This produces a permanent odour when the

air conditioning system is operating which can only be eliminated through con-

siderable effort and expense (replacement of compressor).

Air outlet vents

Fig. 91  Air outlet vents

Read and observe   on page 64 first.

The direction of airflow can be adjusted for the air vents 3 

» Fig. 91

 and the

vents can also be opened and closed individually.

To open, press on the outer edge of the slat in area 

A

 

» Fig. 91

.

To close, move the slats back to their original position.

To change the air flow, turn the slats in the desired direction.

Depending on the setting for air distribution, the air will flow from the follow-

ing air vents.

Set the direction of the air

outlet

Air outlet vents 

» Fig. 91

123

34

35

1235

CAUTION

Do not cover the air vents - the air distribution could be compromised.

67

Heating and ventilation

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Infotainment

Radio Swing / Blues

Important notes

Introduction

The information contained in this section refer to Swing and Blues radio, un-

less it is indicated otherwise.

WARNING

Only use the device in a way that ensures that you are in full control of

your vehicle in every traffic situation - otherwise there is a risk of accident!

Always route the connection cable of the external device such that is

does not restrict you when driving.

WARNING

Adjust the volume to ensure that acoustic signals from outside the vehi-

cle, e.g. the police, ambulances and fire engines, can be heard at all times.

High volumes can cause hearing damage.

Note

In some countries, some unit features can no longer be selected when the ve-

hicle is running faster than a certain speed. This is not a malfunction, but com-

plies with the national legal regulations.

Mobile phones and applications

Fig. 92 

QR code with reference to web

pages for checking the compati-

bility of devices

Read and observe   on page 68 first.

The availability of some of the functions described in this Owner's Manual

depends on the type of device to be connected and the applications instal-

led in it.

Compatibility

On the ŠKODApages, check to see if the device is compatible with the selec-

ted mobile phones. This check is carried out by scanning the QR code 

» Fig. 92

or after typing the following address into the web browser.

http://go.skoda.eu/compatibility

Applications

Applications can be installed on external devices (e.g. mobile phone, tablet)

making it possible to display additional information on the device screen or to

operate the device.
Due to the variety of applications and communication systems as well as their

ongoing development, the available applications may not work in all external

devices. ŠKODA AUTO can accept no liability for their proper function.
The range of available applications and their functionality is dependent on the

device, vehicle and region.

Unit overview and operation

Device Description - Swing

Fig. 93  Equipment overview: Swing

Left control dial for switching the device on and off; volume adjustment
Control dial for calls and confirmations

68

Infotainment

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SD card slot
Colour contact-less display
AUX input



 - Radio menu 

» page 75



 - Media menu 

» page 77

Function buttons (current button function is shown in the display above

each button)



 - Telephone menu 

» page 82



 - Device settings 

» page 71

Device Description - Blues

Fig. 94  Equipment overview: Blues

Left control dial for switching the device on and off; volume adjustment
Control dial for calls and confirmations
SD card slot
Black and white contact-less display
AUX input



 - Radio menu 

» page 75



 - Media menu 

» page 77

Function buttons (current button function is shown in the display above

each button)



 - Return to the higher-level menu



 - Device settings 

» page 74

CD slot

Buttons for rewind / fast forward

1

2
3
4
5
6

7
8

1

2
3
4
5
6

7
8
9

  

CD-eject button
- Sound settings 

» page 73

Operation using the buttons on the device

Operation

Action

Selecting menu/menu item/func-

tion

Turning the knob .

Confirming menu/menu

item/function

Press the wheel 

Returning to higher-level menu

Applies to Swing: By pressing the func-

tion button 

Applies to Blues: By pressing 



Select the menu item / function

value

 - Selected menu item/function value

 - Deselected menu item/function value

 - Selected menu item/function value

Set value

Turning the knob .

Pressing the function key  or 

Operation using the multifunction steering wheel

Fig. 95 

Buttons/dial on the multifunc-

tion steering wheel

The radio, media and the phone can be operated using the multifunction steer-

ing wheel.
To operate the phone via the multifunction steering wheel, the telephone and

the device must be paired 

» page 82

.

69

Radio Swing / Blues

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Phone menu

Button /

dial

» Fig. 95

Action

Function

Press

Accept a call/end a call

Hold

Reject a call/Last number dialled/

Switch call to telephone and back (during a

call)

A

Turn

Volume setting

Radio menu

Button /

dial

» Fig. 95

Action

Function

A

Press

Switch sound off/on

A

Turn

Volume setting

Press

Skip to next station/to a station stored under

the preset buttons

Hold

Search forwards

Press

Go to previous station/to a station stored un-

der the preset buttons

Hold

Search backwards

Media menu

Button /

dial

» Fig. 95

Action

Function

A

Press

Switch sound off/on

A

Turn

Volume setting

Press

Skip to next track

Hold

Fast forward

Press

Switch to previous track

Hold

Fast rewind

Note

The devices connected to the AUX input can not be operated with the but-

tons/dials on the multifunction steering wheel.

Display areas

Fig. 96 

Display areas:

Swing/Blues

Fig. 97 

Display areas:

Swing

Description of display 

» Fig. 96

 and 

» Fig. 97

Status line with time and outdoor temperature data and other information
Information on the current menu
Current menu functions
Menu item with “Checkbox”

 - Function is switched on

 - Function is switched off

 Open a submenu

Scroll symbol- motion is achieved by turning the  dial

A
B
C
D

E
F

70

Infotainment

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Power on / off

To power on/off the device, press 

.

Automatic Power On of the device

If the device was not turned switched off using the 

 button before the igni-

tion was turned off, this will automatically switch on after the ignition has been

switched on.

Automatic Power Off of the device

If the vehicle key is pulled out of the ignition lock while the unit is switched on,

the device will switch off automatically.
With the ignition off, the device will automatically turn off after about 30 mi-

nutes.
The device turns off automatically under certain circumstances. The device in-

forms of this via a text message on the device display.

Restart the device

If the device does not respond (if it “freezes”) This can be restarted by hold-

ing

 for longer than 10 s.

Adjust volume

To increase the volume, turn the controller 

 clockwise.

To reduce volume, turn the controller 

 anticlockwise up to mute.

If, at the time of muting, sound is played from the source in the media menu,

then the playback is interrupted (pause)

1)

.

CAUTION

High volumes can cause sound resonance in the vehicle.

When changing or connecting an audio source, this may cause sudden

changes in volume. Reduce the volume before changing or connecting an au-

dio source.

Device Settings - Swing

Main menu settings

Fig. 98 

Main menu set-

tings

Press the button 



.

Choose the desired menu item by turning the dial  Orby pressing the func-

tion button  or  .

Confirm the menu item selection by pressing the controller  Orby pressing

the function button  confirm.

Menu settings for Telephone 

» page 71

- Sound settings 

» page 72

Device settings 

» page 72

Settings for the Radio menu 

» page 73

Media menu settings 

» page 73

Operating theŠKODA Move & Funapplication 

» page 86

Phone menu settings

Press the button



 →  .

Hands-free - Switching a call to the phone / back to the device (the menu item

is displayed during a call)

Select telephone - Search for available telephones/list of paired telephones/se-

lect telephone

User profile - user profile settings

Delete favourites - Management of preferred contacts (favourites)

Mailbox no.: ... - Enter the mailbox phone number

1)

Does not apply to AUX.

71

Radio Swing / Blues

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Contact display ... - Arrangement of telephone contact list

Surname - Sort by contact name

Forename - Sort by contact's first name

Import contacts: ... - Import telephone contacts

Remember your mobile - Turn on/off the warning message in the device display

before forgetting the phone in the vehicle (if the phone was connected to

the device)

Select ringtone - Selection of the device’s own ringtone (using the ringtone is

dependent on the model of phone connected)

Sound settings

Press the button



 →  .

Volume - Volume settings

Maximum switch-on volume - Sets the maximum volume after switching on the

device

Announcements - Adjustment of traffic announcements volume (TP)

Speed adjustment - increases the volume as speed increases

Entertainment fading (parking) - Lowers the audio volume (e.g. radio volume)

with activated parking aid

AUX volume: ... - Sets the volume for the device connected via AUX

Quiet - low volume

Medium - Medium volume

Loud - High volume

BT audio: ... - Volume setting of the device connected via Bluetooth 

®

 audio

profile of the connected external device

Quiet - low volume

Medium - Medium volume

Loud - High volume

navigation announcements - Volume adjustment of navigation announcements

for the ŠKODA Move & Funapplication

Balance - Fader - Setting the sound focus between left and right, front and rear

(applies to equipment with four speakers)

Balance - Setting the sound focus between the left and right (applies to equip-

ment with two speakers)

Bass - Mid - Treble - setting the equaliser

System settings

Press the button



 →  .

Menus for the system settings

Screen - setting the screen displays

Language - set the device language

Bluetooth - Bluetooth

®

 device settings

App connection - Turn the connection on / off with the Move & Funapplication

Remove source safely - Safe removal of external devices

Factory settings - reset to factory settings

System information - System Information

Copyright - license information of the device

Display settings

Press the button



 →  → screen.

Switch off screen (in 10 s) - Enable / disable the automatic display shut-off func-

tion

Brightness: ... - Adjusts the brightness of the display

Show time in standby mode - Time and date shown on the display when the igni-

tion is switched on and the unit is switched off

Colour: ... - Colour selection for the display representation

Settings the device language

Press the button



 →  → Language.

Set the desired language.

By selecting the menu item automatically (same as instrum. cluster) the device lan-

guage is set according to the language setting for the MAXI DOTdisplay

» page 36

.

Bluetooth settings

Press the button



 →  → Bluetooth.

Bluetooth - Switch on/off Bluetooth

®

 function

Visibility: ... - switch on/off the visibility of the Bluetooth

®

 device for other de-

vices

System name: ... - Bluetooth

®

 device name (Skoda BT XXXXwhere XXXX repre-

sents the last four digits of the vehicle identification number)

Paired devices - display the list of paired Bluetooth 

® 

devices

Find devices - searches for available devices

Bluetooth audio (A2DP/AVRCP) - Turn on/off the ability to connect an audio de-

vice (e.g. MP3 player, tablet etc.)

Connection with the application

Press the button



 →  → App connection.

72

Infotainment

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Data transfer active - Turn the connection on / off with the Move & Funapplica-

tion

Safe removal of the external device

Press the button



 →  → Remove source safely.

Select the external device to be removed.

Factory settings (to factory settings)

Press the button



 →  → Factory settings.

Select the menu item to be reset to factory settings.

By selecting the menu item Reset all, all device menus are reset to factory set-

tings.

System information

Press the button



 →  → System information.

Part number: - Part number of the device

Software: - Version of the software used

Hardware: - Version of the hardware used

Bluetooth: - Version of the Bluetooth

®

 software used

to Update device software press the function button  .

The information about available software updates with a ŠKODA partner.

Radio settings

Press the button



 →  .

Arrow buttons: ... - Setting the station change function (function keys  and )

Presets- Change between stations stored under the preset buttons

Stations - Change between all available stations of the selected broadcasting

range

Traffic programme (TP) - Switches TP traffic programme on/off

Radio text - Switching the text display radio (valid only for FM and DAB) on and

off

Delete stored stations - Delete the preset buttons

FM station list: ... - Sort the channels in the list of available stations on the FM

radio range

Alphabetically - Sorting by name

By group - Sorting by PI code

Advanced FM settings - Additional FM broadcast range settings

RDS Regional: ... - Setting the automatic change to a regional stations with a

stronger reception signal

Automatic - Switching on the automatic change

Fix - Turn off the automatic change

Radio Data System (RDS) - enable/disable RDS function (receiving additional in-

formation from the station)

Automatic frequency control (AF) - Search for alternative frequencies of the sta-

tion currently being played to on/off

Advanced DAB settings - Additional DAB broadcast range settings

DAB traffic announcements - Switch on/off DAB traffic announcements

Other DAB announcements - Switch on/off other announcements (e.g., warn-

ings, regional weather, sports reports, financial news)

DAB - DAB station tracking - Switch on/off automatic DAB station tracking on

another frequency or in other station groups

Automatic DAB - FM switching - Switch on/off auto-switching from DAB to the

FM broadcasting range if the DAB signal is lost

Media settings

Press the button



 →  .

Mix/repeat including subfolders - Switching the title display including subfolders

Select Bluetooth device - Display the list of paired Bluetooth

®

 devices

» page 86

Managing paired Bluetooth devices

Device settings - Blues

Sound settings

Press the button 

.

Volume - Volume settings

Max. switch-on vol. - Sets the maximum volume when the device is turned on

Announcements - Adjustment of traffic announcements volume (TP)

Speed-dependent vol. adjustment - increases the volume as speed increases

AUX volume: ... - Sets the volume for the device connected via AUX

Quiet - low volume

Medium - Medium volume

Loud - High volume

73

Radio Swing / Blues

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..