When replacing BCM, save or print current vehicle specification with CONSULT-III configuration before
replacement.
Configuration has three functions as follows
• READ CONFIGURATION is the function to read (extract) vehicle configuration of current BCM.
• WRITE CONFIGURATION - Manual selection is the function to select and write vehicle configuration on

BCM manually.

• WRITE CONFIGURATION - Config file is the function to write vehicle configuration with the data extracted

from current BCM.

CAUTION:

• When replacing BCM, you must perform WRITE CONFIGURATION with CONSULT-III.
• Complete the procedure of WRITE CONFIGURATION in order.
• If you set incorrect WRITE CONFIGURATION, incidents will occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement

INFOID:0000000000892456

SAVING VEHICLE SPECIFICATION

Perform “READ CONFIGURATION” with CONSULT-III to save or print current vehicle specification.

>> GO TO 2.

REPLACE BCM

Replace BCM. Refer to

BCS-64, "Exploded View"

>> GO TO 3.

WRITING VEHICLE SPECIFICATION

Perform “WRITE CONFIGURATION - Config file” or “WRITE CONFIGURATION - Manual selection” with
CONSULT-III to write vehicle specification. Refer to

BCS-4, "CONFIGURATION : Special Repair Require-

ment"

>> GO TO 4.

INITIALIZE BCM (NATS)

Perform BCM initialization. (NATS)

>> WORK END

CONFIGURATION

CONFIGURATION : Description

INFOID:0000000000892457

Vehicle specification needs to be written with CONSULT-III because it is not written after replacing BCM.
Configuration has three functions as follows
• READ CONFIGURATION is the function to read (extract) vehicle configuration of current BCM.
• WRITE CONFIGURATION - Manual selection is the function to select and write vehicle configuration on

BCM manually.

• WRITE CONFIGURATION - Config file is the function to write vehicle configuration with the data extracted

from current BCM.

CAUTION:

BCS-4

< BASIC INSPECTION >

INSPECTION AND ADJUSTMENT

CONFIGURATION : Special Repair Requirement

INFOID:0000000000892458

WRITING VEHICLE SPECIFICATION

Perform “WRITE CONFIGURATION” with CONSULT-III.

When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.

PERFORM “WRITE CONFIGURATION - CONFIG FILE”

Perform “WRITE CONFIGURATION - Config file” with CONSULT-III.

>> WORK END

PERFORM “WRITE CONFIGURATION - MANUAL SELECTION”

For “WRITE CONFIGURATION - Manual selection”, using the following flow chart, identify the correct model
and configuration list.
Confirm and/or change setting value for each item according to the configuration list.
Depending on CONSULT-III software version being used, some or all of the write configuration items shown in
the following configuration lists may be displayed. If an item does not display on the CONSULT-III “WRITE
CONFIGURATION - Manual selection” screen, then it is an auto setting item and it cannot be manually set or
changed.
• Gasoline engine models (RHD)

• Gasoline engine models (LHD)

MANUAL SETTING ITEM

Items

Setting value

HANDLE

RHD

PTC HEATER

WITHOUT

AUTO LIGHT

WITH

⇔

WITHOUT

KEYLESS ENTRY

WITH

⇔

WITHOUT

DTRL

WITHOUT

THEFT ALARM

WITH

⇔

WITHOUT

AUTO SETTING ITEM

RAIN SENSOR

WITH or WITHOUT

H/L WSR SWTRG

FR WSR SW

H/L_BULB

H4 HALOGEN or DEFAULT

FR FOG LAMP

WITH or WITHOUT

DONGLE

WITH

SUPER LOCK

WITH

I-KEY

WITH or WITHOUT

DOOR/L SPEED

WITH

H/L BAT SAVER

WITHOUT

KEY WARNING

MODE1

R LAMP LOGIC

MODE2

BCS

INSPECTION AND ADJUSTMENT

BCS-5

< BASIC INSPECTION >

• Diesel engine models (RHD)

• Diesel engine models (LHD)

MANUAL SETTING ITEM

Items

Setting value

HANDLE

LHD

PTC HEATER

WITHOUT

AUTO LIGHT

WITH

⇔

WITHOUT

KEYLESS ENTRY

WITH

⇔

WITHOUT

DTRL

WITH

⇔

WITHOUT

THEFT ALARM

WITHOUT

AUTO SETTING ITEM

RAIN SENSOR

WITH or WITHOUT

H/L WSR SWTRG

FR WSR SW

H/L_BULB

H4 HALOGEN or DEFAULT

FR FOG LAMP

WITH or WITHOUT

DONGLE

WITHOUT

SUPER LOCK

WITHOUT

I-KEY

WITH or WITHOUT

DOOR/L SPEED

WITH

H/L BAT SAVER

WITHOUT

KEY WARNING

MODE1

R LAMP LOGIC

MODE2

MANUAL SETTING ITEM

Items

Setting value

HANDLE

RHD

PTC HEATER

2 PTC

AUTO LIGHT

WITH

⇔

WITHOUT

KEYLESS ENTRY

WITH

⇔

WITHOUT

DTRL

WITHOUT

THEFT ALARM

WITH

⇔

WITHOUT

AUTO SETTING ITEM

RAIN SENSOR

WITH or WITHOUT

H/L WSR SWTRG

FR WSR SW

H/L_BULB

H4 HALOGEN or DEFAULT

FR FOG LAMP

WITH or WITHOUT

DONGLE

WITH

SUPER LOCK

WITH

I-KEY

WITH or WITHOUT

DOOR/L SPEED

WITH

H/L BAT SAVER

WITHOUT

KEY WARNING

MODE1

R LAMP LOGIC

MODE2

Content .. 1476 1477 1478 1479 ..