Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred) as much as possible when the customer brings the vehicle in.

>> GO TO 2.

REPRODUCE THE MALFUNCTION INFORMATION

Check the malfunction on the vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.

>> GO TO 3.

PERFORM “BASIC INSPECTION”

Perform the basic inspection.Refer to

MIR-36, "Basic Inspection"

>> GO TO 4.

IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”

Use “Symptom diagnosis” from the symptom inspection result in step 2. Then identify where to start perform-
ing the diagnosis based on possible causes and symptoms.

>> GO TO 5.

IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”

Perform the diagnosis with “Component diagnosis” of the applicable system.

>> GO TO 6.

REPAIR OR REPLACE THE MALFUNCTIONING PARTS

Repair or replace the specified malfunctioning parts.

>> GO TO 7.

FINAL CHECK

Check that malfunctions are not reproduced when obtaining the malfunction information from the customer,
referring to the symptom inspection result in step 2.

Is the malfunctioning part repaired or replaced?

YES

>> Trouble diagnosis is completed.

>> GO TO 3.

MIR-4

< FUNCTION DIAGNOSIS >

DOOR MIRROR SYSTEM

FUNCTION DIAGNOSIS

DOOR MIRROR SYSTEM

Component Description

INFOID:0000000000951513

Component

Function

Door mirror remote control switch (mirror switch

･

change over switch)

It supplies power to mirror motor by operating mirror switch and change
over switch.

Door mirror remote control switch (open/close
switch)

It supplies power to folding motor by operating open/close switch.

Door mirror motor

It makes mirror face operate from side to side and up and down with the
mirror control switch operation.

Folding motor

It makes mirror folding with the mirror control switch operation.

INSIDE MIRROR SYSTEM

MIR-5

< FUNCTION DIAGNOSIS >

MIR

INSIDE MIRROR SYSTEM

System Description

INFOID:0000000000951514

It senses the brightness of the headlight of the vehicle from the rear with the sensor integrated into the mirror.
It automatically changes the light transmittance according to the sensed brightness of the light from the head-
light.

Component Description

INFOID:0000000000951515

Component

Function

Auto anti-dazzling inside mirror

It automatically changes the light transmittance according to the brightness of the
light at the headlight of the vehicle from the rear.

Content .. 1312 1313 1314 1315 ..