Lexus NX350 (2024 year). Manual in english

Right-hand side temperature control switch

[SYNC] switch

[A/C] switch

Outside/recirculated air mode switch

Fan speed control switch

[OFF] switch

[AUTO] switch

Adjusting the temperature

Turn temperature control dial clockwise to increases the temperature and turn the
dial counterclockwise to decreases the temperature.
When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will match the setting for the driver’s side.

When the indicator on the [Sync] switch is off, turning the [Sync] switch on will illuminate
the [Sync] switch indicator and the temperature setting for the front passenger’s side will
become the same as that for the driver’s side.
When the front passenger’s side temperature adjustment switch is operated, the indicator
on the [Sync] switch will turn off and the temperature setting for the front passenger’s side
will be able to be adjusted.
When the indicator on the [A/C] switch is off, the blower and heater can be used.

Setting the fan speed

To increase the fan speed, select the [+] fan speed adjustment switch or slide the
icon of the fan speed adjustment switch right. To decrease the fan speed, select the
[-] fan speed adjustment switch or slide the icon of the fan speed adjustment switch
left.
Select the [Off] switch to turn the fan off.
The fan can also be stopped by touching and holding the [-] fan speed adjustment
switch or sliding the icon of the fan speed adjustment switch to the leftmost position
and holding it.

Changing the air flow mode

Select the airflow mode control switch

The airflow mode changes each time the switch is selected.
The air outlets and air volume changes according to the selected air flow mode.

: Air flows to the upper body

4-3. Adjusting the temperature/environment inside the vehicle

248

: Air flows to the upper body and feet

: Air flows to the feet

: Air flows to the feet and the windshield defogger operates

INFORMATION

■

Location of air outlets

Switching between outside air mode and recirculated air mode

Temporarily changing the air mode to recirculated air mode is recommended to
prevent dirty air from entering the vehicle, such as when in a tunnel or heavy traffic,
and to help cool the interior when the outside air temperature is high.
Select the outside/recirculated air mode switch.

The air mode changes between outside air mode and recirculated air mode each time the
switch is selected. When recirculated air mode is selected, the indicator will illuminate.
The air mode may change automatically depending on the temperature setting, tempera-
ture inside the vehicle, etc.

Front seat concentrated airflow mode (S-FLOW)

This function automatically controls the airflow of the air conditioning system to
prioritize airflow to the front seats. Fuel economy can be enhanced by reducing
unnecessary cooling.
Front seat concentrated airflow mode operates in the following situations.

●

No passengers are detected in the rear seats

●

The windshield defogger is not operating

4-3. Adjusting the temperature/environment inside the vehicle

249

Interior feat

The S-Flow switch is

(ON) on the option screen.

In front seat concentrated airflow mode, directing airflow to the front seats only
and to all seats can be switched via switch operation. When the mode has been
switched manually, automatic airflow control stops operating.

Select the option screen switch.

Select the [S-Flow] switch.

●

Indicator illuminated: Airflow to the front seats only

●

Indicator off: Airflow to all the seats

INFORMATION

■

Operation of automatic airflow control

●

In order to maintain a comfortable interior, airflow may be directed to seats
without passengers immediately after the engine is started and at other times
depending on the outside temperature.

●

After the engine is started, if passengers move around inside or enter/exit the
vehicle, the system cannot accurately detect the presence of passengers and
automatic airflow control will not operate.

■

Operation of manual airflow control

Even if the function is manually switched to directing airflow to only the front seats,
when a rear seat is occupied, it may automatically direct airflow to all seats.

■

To return to automatic airflow control

1. With the indicator off, turn the engine switch off.

2. After 60 minutes or more elapse, turn the engine switch to ON.

Eco air conditioning mode

The air conditioning is controlled with low fuel consumption prioritized such as
reducing fan speed, etc.

Select the option screen switch.

Select the [Eco heat/cool].

●

In Eco drive mode, the air conditioning system is controlled as follows to prioritize
fuel efficiency. To improve air conditioning performance, turn off Eco air condition-
ing mode.

•

Engine speed and compressor operation controlled to restrict heating/cooling
capacity.

•

Fan speed restricted when automatic mode is selected.

4-3. Adjusting the temperature/environment inside the vehicle

250

●

When the driving mode is set to Eco driving mode, the Eco air conditioning mode
will be turned on automatically. Even in this case, the Eco air conditioning mode can
be turned off by selecting the [Eco heat/cool].

Warming the interior quickly (Max heat)

When [Max heat] is turned on, in order to warm the interior quickly, the settings of
the air conditioning system will be changed immediately.

Select the shortcut screen switch.

Select the [Max heat] switch.

●

The temperature setting of the air conditioning system will be set to [Hi] and the
[AUTO] switch will be turned on.

●

Seat heaters will be set to Hi.

●

Heated steering wheel will be set to Hi. (vehicles with heated steering wheel)

●

In the following situations, the front passenger’s side seat heater/seat ventilator will
be set to [AUTO].

•

When [Climate concierge] is on

•

When the system determines that a passenger is in the front passenger seat

●

When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will also be set to [Hi].

INFORMATION

■

[Max heat]

●

The [Max heat] switch cannot be used to turn the setting off.

●

After the [Max heat] switch has been operated, the temperature setting can be
adjusted using the temperature control switches of the air conditioning system.

●

When [Climate concierge] is on, if the [AUTO] switch is turned on, the seat
heaters and seat ventilators of the front seats, and the heated steering wheel will
be operated automatically according to the temperature setting.

●

Each function can also be adjusted to the desired setting.

Cooling the interior quickly (Max cool)

When [Max cool] is turned on, in order to cool the interior quickly, the settings of
the air conditioning system will be changed immediately.

Select the shortcut screen switch.

Select the [Max cool] switch.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

251

Interior feat

●

The temperature setting of the air conditioning system will be set to [Lo] and the
[AUTO] switch will be turned on.

●

Seat ventilators will be set to Hi. (vehicles with seat ventilators)

●

In the following situation, the heated steering wheel will be set to [AUTO]. (vehicles
with heated steering wheel)

•

When [Climate concierge] is on

●

In the following situations, the front passenger’s side seat heater/seat ventilator will
be set to [AUTO] .

•

When [Climate concierge] is on

•

When the system determines that a passenger is in the front passenger seat

●

When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will also be set to [Lo] .

INFORMATION

■

[Max cool]

●

The [Max cool] switch cannot be used to turn the setting off.

●

After the [Max cool] switch has been operated, the temperature setting can be
adjusted using the temperature control switches of the air conditioning system.

●

Each function can also be adjusted to the desired setting.

Adjusting the position of and opening and closing the air outlets

To adjust the position of and opening and closing the air outlets, perform the
following operations:

▶

Front center

Direct air flow to the left or right, up or
down

Turn the knob to open or close the vent

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

252

▶

Front side

Direct air flow to the left or right, up or
down

Turn the knob to open or close the vent

▶

Rear

Direct air flow to the left or right, up or
down

Turn the knob to open or close the vent

4-3. Adjusting the temperature/environment inside the vehicle

253

Interior feat

Heated steering wheel

Warm up the grip of the steering wheel.

WARNING

Care should be taken if anyone in the following categories comes in contact with the
steering wheel when the heater is on:

●

Babies, small children, the elderly, the sick and the physically challenged

●

Persons with sensitive skin

●

Persons who are fatigued

●

Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold
remedies, etc.)

NOTICE

Do not use the functions when the engine is off.

INFORMATION

■

Operating conditions

When the engine switch is ON.

Turn the steering heater ON/OFF

Select

on the center display.

Each time the switch is selected, the operation condition changes as follows.

AUTO

→

Hi (2 segments lit)

→

Lo (1 segment lit)

→

Off

The level indicator (red) lights up during operation. [AUTO] indicator lights up during
automatic operation.

INFORMATION

■

Customization

The temperature setting of the heated steering wheel can be set through [Vehicle
customize] on the center display.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

254

Seat heaters

Warm up the seat upholstery.

WARNING

■

To prevent minor burn injuries

Care should be taken if anyone in the following categories comes in contact with the
seats when the heater is on:

●

Babies, small children, the elderly, the sick and the physically challenged

●

Persons with sensitive skin

●

Persons who are fatigued

●

Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold
remedies, etc.)

■

To prevent causes of overheating and minor burn injuries

Observe the following precautions when using a seat heater:

●

Do not cover the seat with a blanket or cushion when using the seat heater.

●

Do not use seat heater more than necessary.

NOTICE

■

To prevent damage to the seat heaters

Do not put heavy objects that have an uneven surface on the seat and do not stick sharp
objects (needles, nails, etc.) into the seat.

■

To prevent battery discharge

Do not use the functions when the engine is off.

INFORMATION

■

Operating conditions

The engine switch is in ON.

Turn the front seat heaters ON/OFF

Select

on the center display.

Each time the switch is selected, the operation condition changes as follows.
AUTO

→

Hi (3 segments lit)

→

Mid (2 segments lit)

→

Lo (1 segment lit)

→

Off

Vehicles with seat ventilators: The level indicator (yellow) lights up during operation.

4-3. Adjusting the temperature/environment inside the vehicle

255

Interior feat

The level indicator (red) lights up during operation. [AUTO] indicator lights up during
automatic operation.

INFORMATION

■

Customization

The temperature setting of the seat heaters of the front seats can be set through [Vehicle
customize] on the center display.

Turns the rear seat heaters on/off

Press the switch.

Each time the switch is pressed, the operation condi-
tion changes as follows.
Hi (3 segments lit)

→

Mid (2 segments lit)

→

Lo (1

segment lit)

→

Off

The level indicators (yellow) light up during operation.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

256

Seat ventilators

Using fans inside the seats, improved ventilation can be provided at the surface of
the seats.

NOTICE

■

To prevent damage to the seat ventilators

Do not put heavy objects that have an uneven surface on the seat and do not stick sharp
objects (needles, nails, etc.) into the seat.

■

To prevent battery discharge

Do not use the functions when the engine is off.

INFORMATION

■

Operating conditions

The engine switch is in ON.

Turn the seat ventilators (front) ON/OFF

Select

on the center display.

Each time the switch is selected, the operation condition changes as follows.
Hi (3 segments lit)

→

Mid (2 segments lit)

→

Lo (1 segment lit)

→

Off

The level indicator (blue) lights up during operation. [AUTO] indicator lights up during
automatic operation.

INFORMATION

■

Air conditioning system-linked control mode

When a seat ventilator is set to Hi, the fan speed of the seat ventilator may increase
according to the fan speed of the air conditioning system.

■

Customization

The fan speed setting of the seat ventilators can be set through [Vehicle customize] on
the center display.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

257

Interior feat

Using the moon roof

For comfortable cabin experience, the moon roof can be opened or tilted up.

WARNING

Observe the following precautions.

●

Do not allow any passengers to put their hands or heads outside the vehicle while it is
moving.

●

Do not sit on top of the moon roof.

●

The driver is responsible for moon roof opening and closing operations. In order to
prevent accidental operation, especially by a child, do not let a child operate the moon
roof. It is possible for children and other passengers to have body parts caught in the
moon roof.

●

Make sure that all passengers do not have any part of their body in a position where it
could be caught when the moon roof is being operated.

●

When using the wireless remote control or mechanical key to operate the moon roof,
operate the moon roof after making sure that there is no possibility of any passenger
having any of their body parts caught in the moon roof.
Also, do not let a child operate moon roof with the wireless remote control or
mechanical key. It is possible for children and other passengers to get caught in the
moon roof.

●

If a child is riding in the vehicle, when exiting the vehicle, turn the engine switch off,
carry the key and exit the vehicle along with the child. If a child is left in the vehicle,
they may accidentally operate the moon roof, due to mischief, etc., possibly leading to
an accident.

INFORMATION

■

Operating conditions of the moon roof

The engine switch is in ON.

■

Operating the moon roof after turning the engine off

The moon roof can be operated for approximately 45 seconds after the engine switch is
turned to ACC or OFF.
They cannot, however, be operated once either front door is opened.

■

Sunshade

The sunshade can be opened and closed manually. However, the sunshade will open
automatically when the moon roof is opened.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

258

Related Links

Customizable features(P. 711)

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

261

Interior feat

Functions which aid in safe opening and closing of the panoramic moon
roof

The following functions aid in safe opening and closing of the panoramic moon
roof.

●

Jam protection function
If an object is detected between the panoramic moon roof and the frame while
the panoramic moon roof is closing or tilting down, travel is stopped and the
panoramic moon roof opens slightly.

●

Panoramic moon roof open warning buzzer
The buzzer sounds and a message is shown on the multi-information display in
the instrument cluster when the engine switch is turned off and the driver’s door
is opened with the panoramic moon roof open.

WARNING

■

Jam protection function

●

Never use any part of your body to intentionally activate the jam protection function.

●

The jam protection function may not operate if something gets caught just before the
panoramic moon roof is fully closed.
Also, the jam protection function is not designed to operate while the moon roof
switch is being pressed.
Take care so that your fingers, etc. do not get caught.

Opening the panoramic moon roof

Press the

switch.

Press the

switch. The panoramic moon roof and

electronic sunshade will open automatically.
The panoramic moon roof can be opened from the
tilt-up position.

*1 :

Lightly press either end of the panoramic moon roof

switch to stop the panoramic

moon roof while it is operating.

4-3. Adjusting the temperature/environment inside the vehicle

262

Closing the panoramic moon roof

Press the

switch.

The panoramic moon roof can be opened from the
tilt-up position.

Press the

switch forward. The panoramic moon

roof will fully close automatically.

Tilting up the panoramic moon roof

Press the

switch.

When the panoramic moon roof is tilted up, the elec-
tronic sunshade will open to the half-open position of
the roof.

Tilting down the panoramic moon roof

Press and hold the

switch.

The panoramic moon roof can be tilted down only
when it is in the tilt-up position.

*2 :

Lightly press either end of the panoramic moon roof

switch to stop the panoramic

moon roof while it is operating.

*3 :

Lightly press either end of the panoramic moon roof

switch to stop the panoramic

moon roof while it is operating.

4-3. Adjusting the temperature/environment inside the vehicle

263

Interior feat

Opening and closing the electronic sunshade

For comfortable cabin experience, the electronic sunshade can be opened.

WARNING

Observe the following precautions when opening and closing the electronic sunshade.

●

Make sure that all passengers do not have any part of their body in a position where it
could be caught when the electronic sunshade is being operated.

●

Do not allow children to operate the electronic sunshade. Closing the electronic
sunshade on someone can cause death or serious injury.

●

Keep fingers free of the gaps between the underside of the roof and the electronic
sunshade.
Otherwise a hand may become pinched, possibly causing injury. Also, if the vehicle is
left in direct sunlight for a long time, the underside of the roof could be very hot and
possibly cause burns.

INFORMATION

■

Operating conditions of the electronic sunshade

The engine switch is in ON.

■

Operating the electronic sunshade after turning the engine off

The electronic sunshade can be operated for approximately 45 seconds after the engine
switch is turned to ACC or OFF.
They cannot, however, be operated once either front door is opened.

Functions which aid in safe opening and closing of the electronic sun-
shade

The following function aid in safe opening and closing of the electronic sunshade.
Jam protection function

If an object is detected between the electronic sunshade and the frame while the electronic
sunshade is closing, travel is stopped and the electronic sunshade opens slightly.
When the jam protection function has operated, even if the

side of the switch is

pressed again, the electronic sunshade will not move in the close direction until the reverse
operation has stopped completely.
Depending on the driving conditions and the surroundings, the electronic sunshade may
collide with something and operate in reverse.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

264

WARNING

●

Never use any part of your body to intentionally activate the jam protection function.

●

The jam protection function may not work if something gets caught just before the
electronic sunshade fully closes.
Also, the jam protection function is not designed to operate while the moon roof
switch is being pressed.
Take care so that your fingers, etc. do not get caught.

Opening the electronic sunshade

Press the switch.

The electronic sunshade will open.
If the

switch is pressed and held, the electronic

sunshade will fully open automatically.

Closing the electronic sunshade

Press the switch.

The electronic sunshade will close.
If the

switch is pressed and held, the electronic

sunshade will fully close automatically.

*1 :

Lightly press either end of the

switch to stop the electronic sunshade while it is

operating.

*2 :

Lightly press either end of the

switch to stop the electronic sunshade while it is

operating.

4-3. Adjusting the temperature/environment inside the vehicle

265

Interior feat

Illuminating the interior

Using the interior lights

Location of the interior lights

Rear interior light

Front interior light

Personal lights

Door trim ornament lights

Inside door handle lights

Door courtesy lights

Center console light

**1

Outer foot lights

Footwell lights

When the engine switch is in ON, the door trim ornament lights, inside door handle lights,
center console light, footwell lights will turn on. However, if the instrument panel light
control switch is turned to minimum, the footwell lights will turn off.

* :

If equipped

*1 :

The illumination color can also be changed.

4-4. Illuminating the interior

266

INFORMATION

■

Each lights automatic on/off

●

Illuminated entry system: The lights automatically turn on/off according to engine
switch mode, the presence of the electronic key, whether the doors are locked/un-
locked, and whether the doors are opened/closed.

●

If the interior lights remain on when the engine switch is turned off, the lights will go off
automatically after 20 minutes.

■

Automatic illumination of the interior lights

If any of the SRS airbags deploy (inflate) or in the event of a strong rear impact, the
interior lights will turn on automatically. The interior lights will turn off automatically after
approximately 20 minutes.
The interior lights can be turned off manually. However, in order to help prevent further
collisions, it is recommended that they be left on until safety can be ensured. (The interior
lights may not turn on automatically depending on the force of the impact and conditions
of the collision.)

NOTICE

■

Removing light lenses

Never remove the lens for the front interior light and personal lights. Otherwise, the lights
will be damaged. If the lens need to remove, contact your Lexus dealer.

■

To prevent battery discharge

Do not leave the lights on longer than necessary when the engine is off.

Related Links

Customizable features(P. 711)

Interior lights

INFORMATION

■

The front interior lights may not operate normally when

The front interior lights may not operate normally in the following situations:

●

When water, dirt, etc., have adhered to the lens surface

●

When operated with a wet hand

●

When wearing gloves, etc.

4-4. Illuminating the interior

267

Interior feat

Turning the interior lights on/off

Touch the light.

The front interior light will turn on/off each time it is
touched.
The rear interior light will also turn on/off.
However, when the rear interior light has already been
turned on, it will not be controlled by front interior light
operations.

Linking the opening/closing of the doors to the front interior light operation

Press the

switch.

The link between the front interior light operation and
doors will change between ON/OFF each time the

switch is pressed.

The operation of the rear interior lights will also be
linked to the opening/closing of the doors.

When the door link is turned on, the indicator

will

illuminate.

Turning the rear interior light on/off

Press the

switch.

The rear interior light will turn on/off each time the

switch is pressed.

Operation of the rear interior light is linked to the
turning on/off of the front interior light.
When the rear interior light has been turned on by
front interior light operation, the rear interior light
cannot be turned off by pressing the switch.

Personal lights

INFORMATION

■

The personal lights may not operate normally when

The personal lights may not operate normally in the following situations:

●

When water, dirt, etc., have adhered to the lens surface

●

When operated with a wet hand

●

When wearing gloves, etc.

4-4. Illuminating the interior

268

Using the interior features

Location of the storage features

WARNING

Do not leave eyeglasses, lighters or spray cans in the storage spaces, as the following
may occur when cabin temperature becomes high:

●

Eyeglasses may be deformed by heat or cracked if they come into contact with other
stored items.

●

Lighters or spray cans may explode. If they come into contact with other stored items,
a lighter may catch fire or a spray can may release gas, causing a fire hazard.

Glove box

Auxiliary boxes

Card holders

Bottle holders

Console box

Cup holders

Coin box

INFORMATION

■

Glove box light and console box light

The glove box light and the console box light turn on when the tail lights are on.

4-5. Using the interior features

270

Using the auxiliary boxes

Press in the lid.

WARNING

●

Do not store items heavier than 0.44 lb. (200 g). Doing so may cause the auxiliary
box to open and the items inside may fall out, resulting in an accident.

●

When driving or when the auxiliary box is not in use, keep the lid closed. In the event of
sudden braking or sudden swerving, an accident may occur due to an occupant being
struck by the items stored inside.

Push the lid.

To close, press in and release the lid.

WARNING

▶

Type A

▶

Type B

4-5. Using the interior features

271

Interior feat

Location of the card holders

Using the glove box

WARNING

When driving or when the glove box is not in use, keep it closed.
If left open, in the event of sudden braking or swerving, the front passenger may strike the
glove box lid or stowed items may fly out, possibly leading to an accident.

To open the glove box, pull the lever. The glove box can be locked and unlocked
using the mechanical key.

To open the glove box, pull the lever.

Lock with the mechanical key.

Unlock with the mechanical key.

INFORMATION

■

Glove box light

The glove box light turns on when the tail lights are on.

Use the cup holders

WARNING

●

Do not place anything other than cups or aluminum cans in the cup holders.
Other items may be thrown out of the holders in the event of an accident or sudden
braking, causing injury.
If possible, cover hot drinks to prevent burns.

4-5. Using the interior features

272

WARNING

●

Depending on the shape of the container installed in the cup holder, nearby switch
buttons may be touched by it, unintentionally operating the switch.

▶

Front

▶

Rear

Pull down the armrest.

Locations of the bottle holders

NOTICE

When using a bottle holder, observe the following precautions.

●

Do not place open bottles, glass cups, or paper cups containing liquid in the bottle
holders.
The liquid may spill out and glass cups may break.

●

When storing a bottle, close the cap.

4-5. Using the interior features

273

Interior feat

INFORMATION

■

Bottle holders

A bottle may not be able to be stored depending on its size or shape.

Using the console box

WARNING

When driving or when the console box is not in use, keep it closed.
If left open, in the event of sudden braking or swerving, an occupant may strike the
console box lid or stowed items may fly out, possibly leading to an accident.

To open the console box, press the button and lift the lid.

The console box can be opened from either side.

▶

Front

▶

Rear

4-5. Using the interior features

274

INFORMATION

■

Console box light

The console box light turns on when the tail lights are on.

Using the coin box

WARNING

When driving or when the coin box is not in use, keep it closed.
If left open, in the event of sudden braking or sudden swerving, the driver may strike the
coin box lid or stowed items may fly out, possibly leading to an accident.

Push the knob up to open the
lid.

4-5. Using the interior features

275

Interior feat

Convenient interior features

Function and operation of the USB charging port

NOTICE

■

To prevent damage to the USB charging ports

●

Do not insert foreign objects into the ports.

●

Do not spill water or other liquids into the ports.

●

Rear console: When the USB charging ports are not in use, close the lids. If a foreign
object or liquid enters a port may cause a short circuit.

●

Do not apply excessive force to or impact the USB charging ports.

●

Do not disassemble or modify the USB charging ports.

■

To prevent damage to external devices

●

Do not leave external devices in the vehicle. The temperature inside the vehicle may
become high, resulting in damage to an external device.

●

Do not push down on or apply unnecessary force to an external device or the cable of
an external device while it is connected.

■

To prevent battery discharge

Do not use the USB charging ports for a long period of time with the engine stopped.

The USB charging ports are used to supply 3.0 A of electricity at 5 V to external
devices.
The USB charging ports are for charging only. They are not designed for data
transfer or other purposes.
Depending on the external device, it may not charge properly. Refer to the manual
included with the device before using a USB charging port.

INFORMATION

■

The USB charging ports can be used when

The engine switch is in ACC or ON mode.

■

Situations in which the USB charging ports may not operate correctly

●

If a device which consumes more than 3.0 A at 5 V is connected.

●

If a device designed to communicate with a personal computer, such as a USB
memory device, is connected

●

If the connected external device is turned off (depending on device)

4-5. Using the interior features

276

●

If the temperature inside the vehicle is high, such as after the vehicle has been parked
in the sun

■

About connected external devices

Depending on the connected external device, charging may occasionally be suspended
and then start again. This is not a malfunction.

Use the USB charging port

▶

Instrument panel

▶

On the rear console

Open the lid.

Function and operation of the power outlet (12 VDC)

NOTICE

■

To prevent damage to the power outlet (12 VDC)

●

Do not insert foreign objects into the ports.

●

Do not spill water or other liquids into the ports.

●

When the power outlets (12 VDC) are not in use, close the lids. If a foreign object or
liquid enters a port may cause a short circuit.

●

Do not apply excessive force to or impact the power outlets (12 VDC) ports.

4-5. Using the interior features

277

Interior feat

NOTICE

■

To prevent battery discharge

Do not use the power outlets (12 VDC) for a long period of time with the engine stopped.

The power outlet can be used to supply power for devices which operate on 12
VDC at less than 10A (power consumption of 120 W).

When connecting multiple devices, make sure that the total power consumption of all the
connected devices is less than 120 W.

INFORMATION

■

The power outlet can be used when

The engine switch is in ACC or ON.

■

When turning the engine switch off

Disconnect electrical devices with charging functions, such as mobile battery packs.
If such devices are left connected, the engine switch may not be turned off normally.

Using the accessory sockets (12 VDC)

▶

Instrument panel

Remove the cap.

▶

On the rear console

Open the lid.

4-5. Using the interior features

278

▶

In the luggage compartment

Open the lid.

Function and operation of the wireless charger

A portable device, such as a smartphone or mobile battery, can be charged by
just placing it on the charging area, provided the device is compatible with the Qi
wireless charging standard created by the Wireless Power Consortium.

WARNING

■

Caution while driving

When charging a portable device while driving, for safety reasons, the driver should not
operate the portable device.

■

Precautions for when driving

Do not charge small, lightweight portable devices, such as wireless earbuds, while driv-
ing. Lightweight devices may fly off of the charging tray, possibly leading to an accident.

■

Caution regarding interference with electronic devices

People with implantable cardiac pacemakers, cardiac resynchronization therapy pace-
makers or implantable cardioverter defibrillators, as well as any other electrical medical
device, should consult their physician about the usage of the wireless charger.
Operations of the wireless charger may have an affect on medical devices.

■

To prevent damage or burns

Observe the following precautions.
Failure to do so may result in the possibility of fire, equipment failure or damage, or burns
due to heat.

●

Do not put any metallic objects between the charging area and the portable device
while charging.

●

Do not attach metallic objects, such as aluminum stickers, to the charging area.

●

Do not charge portable devices with aluminum stickers or other metallic objects
attached to the side which touches the charging area.

4-5. Using the interior features

279

Interior feat

Lexus NX350 (2024 year). Manual in english - page 8