Lexus GX460 (2023 year). Manual in english - page 4

Glass hatch

◆

Glass hatch opener

Press the button to pop up the
glass hatch.
Raise

The glass hatch cannot be opened

when the back door is locked.

Unlock the back door to open the

glass hatch. (



P. 116)

◆

Smart access system with push-button start

While carrying the electronic key,
press the button to pop up the
glass hatch.
Raise

The glass hatch can be opened even

when the back door is locked.

◆

Wireless remote control

Press and hold the button to open
the glass hatch. The glass hatch will
pop up.

The glass hatch can be opened using the glass hatch opener or wireless
remote control.

Opening the glass hatch

122

GX460_OM_OM60R43U_(U)

■

When opening the glass hatch

●

Open the glass hatch slowly and carefully.

●

Use the glass hatch opener or wireless remote control when the back door is closed.

■

Operation signals (when opening with the wireless remote control)

A buzzer sounds once to indicate that the glass hatch have been opened.

■

Opening the glass hatch while the rear window wiper is in operation

Rear window wiper operation will stop moving. Operation will recommence after the

glass hatch has been closed.

■

Function to prevent the glass hatch being locked with the electronic key inside

●

When all doors are being locked, closing the glass hatch with the electronic key left

inside the luggage compartment will sound an alarm.

In this case, the glass hatch can be opened using the entry function.

●

Even when the spare electronic key is put in the luggage compartment with all the

doors locked, the key confinement prevention function can be activated so the glass

hatch can be opened. In order to prevent theft, take all electronic keys with you when

leaving the vehicle.

●

Even when the electronic key is put in the luggage compartment with all the doors are

locked, the key may not be detected depending on the places and the surrounding

radio wave conditions. In this case, the key confinement prevention function cannot be

activated, causing the doors to lock when the glass hatch is closed. Make sure to check

where the key is before closing the glass hatch.

●

If you want to lock the spare electronic key in the vehicle, do not open or close the glass

hatch after locking all doors. Otherwise, the glass hatch can be opened due to the key

confinement prevention function and the risk of vehicle theft increases significantly.

■

After closing the glass hatch

Check that the glass hatch is firmly locked. If it is not firmly locked, the rear window wiper

and washer will not operate correctly.

■

Customization

The glass hatch opening operation can be changed. (Customizable features:

GX460_OM_OM60R43U_(U)

123

WARNING

■

While driving

●

Keep the glass hatch closed while driving.

If the glass hatch is left open, it may hit near-by objects while driving or luggage may

be unexpectedly thrown out, causing an accident.

In addition, exhaust gases may enter the vehicle, causing death or a serious health

hazard. Make sure to close the glass hatch before driving.

●

Before driving the vehicle, make sure that the glass hatch is fully closed. If the glass

hatch is not fully closed, it may open unexpectedly while driving, causing an accident.

■

When children are in the vehicle

Do not allow a child to open or close the glass hatch.

Doing so may cause the glass hatch to move unexpectedly, or cause the child’s hands,

head, or neck to be caught by the closing glass hatch.

124

GX460_OM_OM60R43U_(U)

WARNING

■

Operating the glass hatch

Observe the following precautions.

Failure to do so may cause parts of the body to be caught, resulting in death or serious

injury.

●

Remove any heavy loads, such as snow and ice, from the glass hatch before opening

it. Failure to do so may cause the glass hatch suddenly shut again after it is opened.

●

When opening or closing the glass hatch, thoroughly check to make sure the sur-

rounding area is safe.

●

If anyone is in the vicinity, make sure they are safe and let them know that the glass

hatch is about to open or close.

●

Use caution when opening or closing the glass hatch in windy weather as it may move

abruptly in strong wind.

●

Do not pull on the glass hatch damper stay to close the glass hatch, and do not hang

on the glass hatch damper stay.

Doing so may cause hands to be caught or the glass hatch damper stay to break,

causing an accident.

●

Do not attach any accessories other than genuine Lexus parts to the glass hatch.

Such additional weight on the glass hatch may cause the glass hatch to suddenly shut

again after it is opened.

●

The glass hatch may close if it is not opened

fully. It is more difficult to open or close the

glass hatch on an incline than on a level sur-

face, so beware of the glass hatch unexpect-

edly opening or closing by itself. Make sure

that the glass hatch is fully open and secure

before using the luggage compartment. Also

pay attention to your personal belongings

such as bags and ties.

●

When closing the glass hatch, take extra care

to prevent your fingers etc. from being

caught. Also pay attention to your personal

belongings such as bags and ties.

●

When closing the glass hatch, make sure to

press it lightly on its outer surface.

GX460_OM_OM60R43U_(U)

125

NOTICE

■

Glass hatch damper stays

The glass hatch is equipped with damper stays that hold the glass hatch in place.

Observe the following precautions.

Failure to do so may cause damage to the glass hatch damper stay, resulting in mal-

function.

●

Do not attach any foreign objects, such as

stickers, plastic sheets, or adhesives to the

damper stay rod.

●

Do not touch the damper stay rod with gloves

or other fabric items.

●

Do not attach any accessories other than

genuine Lexus parts to the glass hatch.

●

Do not place your hand or foot on the damper

stay or apply lateral forces to it.

Damper stays

126

GX460_OM_OM60R43U_(U)

Smart access system with push-button start

●

Locks and unlocks the side doors (

P. 108)

●

Locks and unlocks the back door (

P. 116)

●

Opens the glass hatch (



P. 121)

●

Starts the engine (



P. 200)

■

Antenna location

The following operations can be performed simply by carrying the electronic
key on your person, for example in your pocket. The driver should always
carry the electronic key.

Antennas outside the cabin
Antennas inside the cabin
Antenna outside the luggage compartment

2
3

GX460_OM_OM60R43U_(U)

127

■

Effective range (areas within which the electronic key is detected)

When starting the engine or changing engine switch modes

The system can be operated when the electronic key is inside the vehicle.

■

Alarms and warning indicators

A combination of exterior and interior alarms as well as warning messages shown on the

multi-information display are used to prevent theft of the vehicle and accidents resulting

from erroneous operation. Take appropriate measures in response to any warning mes-

sage on the multi-information display.

When locking or unlocking the doors

The system can be operated when the elec-

tronic key is within about 2.3 ft. (0.7 m) of

either of the outside front door handle.

(Only the doors detecting the key can be

operated.)

When opening the glass hatch and locking

or unlocking the back door
The system can be operated when the elec-

tronic key is within about 2.3 ft. (0.7 m) of

the back door handle.

Alarm

Situation

Correction procedure

Exterior alarm

sounds once for

5 seconds

An attempt was made to lock

the vehicle while a door and/or

the glass hatch was open.

Close all of the doors

and/or the glass hatch,

and lock the doors

again.

An attempt was made to close

the glass hatch while the elec-

tronic key was still inside the

vehicle.

Open the glass hatch

again and retrieve the

electronic key from the

vehicle.

Interior alarm pings

continuously

The engine switch was turned to

ACCESSORY mode while the

driver’s door was open (or the

driver’s door was opened while

the engine switch was in

ACCESSORY mode).

Turn the engine switch

off and close the driver’s

door.

128

GX460_OM_OM60R43U_(U)

■

Battery-saving function

The battery-saving function will be activated in order to prevent the electronic key bat-

tery and the vehicle battery from being discharged while the vehicle is not in operation

for a long time.

●

In the following situations, the smart access system with push-button start may take

some time to unlock the doors.
• The electronic key has been left in an area of approximately 6 ft. (2 m) of the outside

of the vehicle for 10 minutes or longer.

• The smart access system with push-button start has not been used for 5 days or lon-

ger.

●

If the smart access system with push-button start has not been used for 14 days or lon-

ger, the doors cannot be unlocked at any doors except the driver’s door. In this case,

take hold of the driver’s door handle, or use the wireless remote control or the mechan-

ical key, to unlock the doors.

■

Electronic Key Battery-Saving Function

●

When battery-saving mode is set, battery depletion is minimized by stopping the elec-

tronic key from receiving radio waves.

●

Electronic keys that will not be used for long periods of time can be set to the battery-

saving mode in advance.

■

Conditions affecting operation

The smart access system with push-button start uses weak radio waves. In the following

situations, the communication between the electronic key and the vehicle may be

affected, preventing the smart access system with push-button start, wireless remote

control and engine immobilizer system from operating properly.

(Ways of coping:



P. 567)

●

When the electronic key battery is depleted

●

Near a TV tower, electric power plant, gas station, radio station, large display, airport or

other facility that generates strong radio waves or electrical noise

●

When the electronic key is in contact with, or is covered by the following metallic

objects
• Cards to which aluminum foil is attached

• Cigarette boxes that have aluminum foil inside

• Metallic wallets or bags

• Coins

• Hand warmers made of metal

• Media such as CDs and DVDs

●

When other wireless keys (that emit radio waves) are being used nearby

Press

twice while pressing and holding

. Confirm that the electronic key indi-

cator flashes 4 times.
While the battery-saving mode is set, the

smart access system with push-button start

cannot be used. To cancel the function, press

any of the electronic key buttons.

GX460_OM_OM60R43U_(U)

129

●

When carrying the electronic key together with the following devices that emit radio

waves
• Portable radio, cellular phone, cordless phone or other wireless communication

devices

• Another vehicle’s electronic key or a wireless key that emits radio waves

• Personal computers or personal digital assistants (PDAs)

• Digital audio players

• Portable game systems

●

If window tint with a metallic content or metallic objects are attached to the rear win-

dow

●

When the electronic key is placed near a battery charger or electronic devices

●

When the vehicle is parked in a pay parking spot where radio waves are emitted

■

Note for the entry function

●

Even when the electronic key is within the effective range (detection areas), the system

may not operate properly in the following cases:
• The electronic key is too close to the window or outside door handle, near the

ground, or in a high place when the doors are locked or unlocked.

• The electronic key is on the instrument panel, luggage cover or floor, or in the door

pockets or glove box when the engine is started or engine switch modes are

changed.

●

Do not leave the electronic key on top of the instrument panel or near the door pockets

when exiting the vehicle. Depending on the radio wave reception conditions, it may be

detected by the antenna outside the cabin and the doors will become lockable from the

outside, possibly trapping the electronic key inside the vehicle.

●

As long as the electronic key is within the effective range, the doors may be locked or

unlocked by anyone. However, only the doors detecting the electronic key can be used

to unlock the vehicle.

●

Even if the electronic key is not inside the vehicle, it may be possible to start the engine

if the electronic key is near the window.

●

The doors may lock or unlock if a large amount of water splashes on the door handle,

such as in the rain or in a car wash, when the electronic key is within the effective range.

(The doors will automatically be locked after approximately 60 seconds if the doors or

the glass hatch are not opened and closed.)

●

If the wireless remote control is used to lock the doors when the electronic key is near

the vehicle, there is a possibility that the door may not be unlocked by the entry func-

tion. (Use the wireless remote control to unlock the doors.)

●

Touching the door lock sensor while wearing gloves may prevent lock operation.

●

When the lock operation is performed using the lock sensor, recognition signals will be

shown up to two consecutive times. After this, no recognition signals will be given.

●

If the door handle becomes wet while the electronic key is within the effective range,

the door may lock and unlock repeatedly. In this case, follow the following correction

procedures to wash the vehicle.
• Place the electronic key in a location 6 ft. (2 m) or more away from the vehicle. (Take

care to ensure that the key is not stolen.)

• Set electronic key to battery-saving mode to disable the smart access system with

push-button start. (

P. 128)

130

GX460_OM_OM60R43U_(U)

●

If the electronic key is inside the vehicle and a door handle becomes wet during a car

wash, a buzzer may sound outside the vehicle and “KEY DETECTED IN VEHICLE”/

“Key detected in vehicle” may be shown on the multi-information display. To turn off the

alarm, lock all the doors.

●

The lock sensor may not work properly if it comes into contact with ice, snow, mud, etc.

Clean the lock sensor and attempt to operate it again, or use the lock sensor on the

lower part of the door handle.

●

A sudden approach to the effective range or door handle may prevent the doors from

being unlocked. In this case, return the door handle to the original position and check

that the doors unlock before pulling the door handle again.

●

Unlocking the vehicle may take more time if another electronic key is within the effec-

tive range.

: This setting can be customized at your Lexus dealer.

■

When the vehicle is not driven for extended periods

●

To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the

vehicle.

●

The smart access system with push-button start can be deactivated in advance.

(

●

Setting the electronic key to battery-saving mode helps to reduce key battery deple-

tion. (



P. 128)

■

To operate the system properly

Make sure to carry the electronic key when operating the system. Do not get the elec-

tronic key too close to the vehicle when operating the system from the outside of the

vehicle.
Depending on the position and holding condition of the electronic key, the key may not

be detected correctly and the system may not operate properly. (The alarm may go off

accidentally, or the door lock prevention function may not operate.)

■

If the smart access system with push-button start does not operate properly

●

If the doors cannot be locked or unlocked, perform the following.
• Bring the electronic key close to the door handle and perform a lock or unlock

operation.

• Use the wireless remote control.

If the doors cannot be locked or unlocked by perform the above, use the mechanical

key. (

P. 567)

●

If the engine cannot be started, refer to P. 568

■

Customization

Settings (e. g. smart access system with push-button start) can be changed.

(Customizable features:



■

If the smart access system with push-button start has been deactivated in a customized

setting

●

Locking and unlocking the doors:

Use the wireless remote control or mechanical key. (



P. 108, 567)

●

Starting the engine and changing engine switch modes:



P. 568

●

Stopping the engine:



P. 201

GX460_OM_OM60R43U_(U)

131

WARNING

■

Caution regarding interference with electronic devices

●

People with implantable cardiac pacemakers, cardiac resynchronization therapy-

pacemakers or implantable cardioverter defibrillators should keep away from the

smart access system antennas. (



P. 126)

The radio waves may affect the operation of such devices. If necessary, the entry

function can be disabled. Ask your Lexus dealer for details, such as the frequency of

radio waves and timing of the emitted radio waves. Then, consult your doctor to see if

you should disable the entry function.

●

Users of any electrical medical device other than implantable cardiac pacemakers,

cardiac resynchronization therapy-pacemakers or implantable cardioverter defibril-

lators should consult the manufacturer of the device for information about its opera-

tion under the influence of radio waves.

Radio waves could have unexpected effects on the operation of such medical

devices.

Ask your Lexus dealer for details on disabling the entry function.

GX460_OM_OM60R43U_(U)

133

■

When adjusting the seat

●

Make sure that any surrounding passengers or objects are not contact the seat.

●

Take care when adjusting the seat so that the head restraint does not touch the ceiling

and sun visor.

■

Power easy access system

The driver’s seat and steering wheel move in accordance with engine switch mode and

the driver’s seat belt condition. (

P. 145)

■

Active head restraints

Even small forces applied to the seatback may cause the head restraint to move. Pushing

up a locked head restraint forcibly may appear the head restraint inner structure. These

do not indicate problems.

WARNING

■

When adjusting the seat position

●

Take care when adjusting the seat position to ensure that other passengers are not

injured by the moving seat.

●

Do not put your hands under the seat or near the moving parts to avoid injury.

Fingers or hands may become jammed in the seat mechanism.

■

Seat adjustment

To reduce the risk of sliding under the lap belt during a collision, do not recline the seat

more than necessary.

If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces

directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk

of death or serious injury in the event of an accident.

Adjustments should not be made while driving as the seat may unexpectedly move and

cause the driver to lose control of the vehicle.

Inner
structure

During rear-end collision

GX460_OM_OM60R43U_(U)

135

■

Getting in the vehicle

Pull the seatback angle adjustment
lever and fold down the seatback.
The seat will slide forward.
Move the seat to the front-most
position

■

Getting out of the vehicle

Pull the release lever and fold down
the seatback. The seat will slide for-
ward.
Move the seat to the front-most
position

Make sure that no passenger is

seated on the second seat before

pulling the release lever.

■

After passengers have entered/exited the vehicle

Lift up the seatback and slide the seat backward until it locks.

Moving a second seat for third seat access (right side only for 7-passen-
ger models, both side for 6-passenger models)

GX460_OM_OM60R43U_(U)

137

■

Folding down second center seatback only (for 7-passenger models)

■

If you cannot raise the second seatback

Pull the center seatback lock release lever

behind the seatback and fold it down.
To return the center seatback to its original posi-

tion, lift it up until it locks.

Release the seat belt lock by:

Pushing on the lower front edge of the seat-

back to slacken the seat belt.
Let the seat belt retract a little.

138

GX460_OM_OM60R43U_(U)

■

Before folding down the third seats

Use the seat belt hanger to prevent
the belt from being tangled.

Make sure that the seat belts are

removed from the hangers before

using them.

■

Folding down the third seats



From rear door side
Pull the strap to fold the head
restraint.

Pull the seat cushion lock release
lever.

The seat cushion is stowed automati-

cally.

Pull the seatback lock release
lever and fold the seatback down.

Folding down the third seats (manual seat)

GX460_OM_OM60R43U_(U)

139



From back door side
Pull the strap to fold the head
restraint.

Pull the seat cushion/seatback
lock release lever.

The seat cushion is stowed automati-

cally.

Fold the seatback down.

■

Returning the third seats

From rear door side, unlock the
seatbacks by pulling the lock
release lever, and lift them up until
they lock.

GX460_OM_OM60R43U_(U)

141

■

Before folding down the third seats

Use the seat belt hangers to prevent
the belts from being tangled.

Make sure that the seat belts are

removed from the hangers before

using them.

■

Folding down the third seats

Press and hold

. Two

beeps sound and the seatback
will rise.

When operating is completed, two

beeps sound again.

Press and hold

again. Two

beeps sound, the head restraints
will fold forward, and the seat will
be stowed.

When operating is completed, two

beeps sound again.

142

GX460_OM_OM60R43U_(U)

■

Returning the third seats

Press and hold

Two beeps sound and seatback
and seat cushion begin to move.
When operating is completed,
two beeps sound again.

Lift the head restraints up until
they lock.

■

The third power seats can be operated when

●

The engine switch is off.

●

The shift lever is in P position with the engine switch in IGNITION ON mode.

■

During third power seat stowing operation

Do not remove your hand from the switch until the operation stops automatically. If you

remove your hand from the switch, the operation will stop and the buzzer will sound con-

tinuously. The seat cannot be used in this state. The buzzer will stop when the switch is

pressed again.

GX460_OM_OM60R43U_(U)

143

■

Enlarging the luggage compartment

The third seat can be used for sitting when it is in the position shown in step of the fold-

ing down the third seats. (



P. 138, 140)

This can be convenient for enlarging the luggage compartment, for instance when the

luggage is against the back of the seatback.

■

If the warning buzzer sounds continuously

If there is an abnormality in the system, the warning buzzer will sound continuously while

the engine switch is in IGNITION ON mode. In this case, take the following operations:

Press and hold

to return the seat.

Press and hold

to stow the seat.

For each step, wait until the seat movement stops automatically and the two beeps sound

twice before removing your hand from the switch.
If the warning buzzer does not stop even after performing the above procedure cor-

rectly, perform the following operations:

Press and hold

on the rear door side.

While holding

, press forward on

5 times within 10 seconds and keep

holding

until 3 beeps sound. The beep will then sound continuously again.

Repeat step and .

144

GX460_OM_OM60R43U_(U)

WARNING

■

When folding the seatbacks down

Observe the following precautions. Failure to do so may result in death or serious

injury.

●

Do not fold the seatbacks down while driving.

●

Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.

●

Do not allow anyone to sit on a folded seatback or in the luggage compartment while

driving.

●

Do not allow children to enter the luggage compartment.

■

Seat adjustment

Observe the following precautions. Failure to do so may result in death or serious

injury.

●

To reduce the risk of sliding under the lap belt during a collision, do not recline the

seat more than necessary.

If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces

directly to the abdomen, or your neck may contact the shoulder belt, increasing the

risk of death or serious injury in the event of an accident.

Adjustments should not be made while driving as the seat may unexpectedly move

and cause the driver to lose control of the vehicle.

●

Be careful not to get hands or feet pinched between the rear console box and the

second seat when folding down the rear seatback.

■

When stowing the third seats

Observe the following precautions. Failure to do so may result in death or serious

injury.

●

Check that there is no luggage and that there are no other people around the seat

before stowing operation.

●

Do not insert hands or feet into the moving parts of the seat.

●

Do not allow children to operate the seat.

■

After returning the seatbacks to the upright position

Observe the following precautions. Failure to do so may result in death or serious

injury.

●

Make sure the seatback is securely locked by pushing it forward and rearward on the

top.

●

Check that the seat belts are not twisted or caught in the seatback.

NOTICE

■

When returning the third seat (vehicles with luggage cover)

If the luggage cover is installed in the luggage compartment, make sure you remove it

before returning the third seat. (

P. 433) The luggage cover may be damaged by the

seat.

145

GX460_OM_OM60R43U_(U)

Driving position memory

The seat and steering wheel are automatically adjusted to allow the driver to
enter and exit the vehicle easily.
When all of the following have been
performed, the driver’s seat and steer-
ing wheel are automatically adjusted to
a position that allows driver to enter
and exit the vehicle easily.

• The shift lever has been shifted to P.
• The engine switch has been turned

off.

• The driver’s seat belt has been unfas-

tened.

When any of the following has been performed, the driver’s seat and steering
wheel automatically return to their original positions.

• The engine switch has been turned to ACCESSORY mode or IGNITION

ON mode.

• The driver’s seat belt has been fastened.

■

Operation of the power easy access system

When exiting the vehicle, the power easy access system may not operate if the seat is

already close to the rearmost position, etc.

■

Customization

The seat movement amount settings of the power easy access system can be custom-

ized. (Customizable features:



This feature automatically adjusts the driver’s seats, steering wheel and out-
side rear view mirrors to make entering and exiting the vehicle easier or to
suit your preferences.

Power easy access system

146

GX460_OM_OM60R43U_(U)

Your preferred driving position (the position of the driver’s seat, steering wheel
and outside rear view mirrors) can be recorded and recalled by pressing a but-
ton.
Two different driving positions can be recorded into memory.

■

Recording procedure

Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the
desired positions.
While pressing the “SET” button,
or within 3 seconds after the
“SET” button is pressed, press
button “1” or “2” until the buzzer
sounds.

If the selected button has already

been preset, the previously recorded

position will be overwritten.

■

Recall procedure

Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.

Driving position memory

2
3

GX460_OM_OM60R43U_(U)

147

■

To stop the position recall operation part-way through

Perform any of the following:

●

Press the “SET” button.

●

Press button “1” or “2”.

●

Operate any of the seat adjustment switches (only cancels seat position recall).

●

Operate the tilt and telescopic steering control switch (only cancels steering wheel

position recall).

■

Seat positions that can be memorized (



P. 132)

The adjusted positions other than the position adjusted by lumbar support switch can be

recorded.

■

Operating the driving position memory after turning the engine switch off

Recorded seat positions can be activated up to 180 seconds after the driver’s door is

opened and another 60 seconds after it is closed again.

■

In order to correctly use the driving position memory function

If a seat position is already in the furthest possible position and the seat is operated in the

same direction, the recorded position may be slightly different when it is recalled.

Each electronic key can be registered to recall your preferred driving position.

■

Registering procedure

Record your driving position to button “1” or “2” before performing the follow-
ing:
Carry only the key you want to register, and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be recorded
properly.

Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Recall the driving position that you want to record.
While pressing the recalled but-
ton, press and hold the door lock
switch (either lock or unlock) until
the buzzer sounds.

If the button could not be registered,

the buzzer sounds continuously for

approximately 3 seconds.

Memory recall function

2
3

148

GX460_OM_OM60R43U_(U)

■

Recall procedure

Make sure that the doors are locked before recalling the driving position.
Carry the electronic key that has been registered to the driving position,
and then unlock and open the driver’s door using the smart access system
with push-button start or wireless remote control.

The driving position will move to the recorded position (not including the steering

wheel). However, the seat will move to a position slightly behind the recorded posi-

tion in order to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the seat and

outside rear view mirrors will not move.

Turn the engine switch to ACCESSORY mode or IGNITION ON mode,
or fasten a seat belt.

The seat and steering wheel will move to the recorded position.

■

Cancelation procedure

Carry only the key you want to cancel and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.

Turn the engine switch to IGNITION ON mode.
While pressing the “SET” button, press and hold the door lock switch
(either lock or unlock) until the buzzer sounds twice.

If the button could not be canceled, the buzzer sounds continuously for approxi-

mately 3 seconds.

GX460_OM_OM60R43U_(U)

149

■

Recalling the driving position using the memory recall function

●

Different driving positions can be registered for each electronic key. Therefore, the

driving position that is recalled may be different depending on the key being carried.

●

If a door other than the driver’s door is unlocked with the smart access system with

push-button start, the driving position cannot be recalled. In this case, press the driving

position button which has been set.

■

Customization

The unlock door settings of the memory recall function can be customized.

(Customizable features:



WARNING

■

Seat adjustment caution

Take care during seat adjustment so that the seat does not strike the rear passenger or

squeeze your body against the steering wheel.

150

GX460_OM_OM60R43U_(U)

Head restraints

Vertical adjustment

Pull the head restraints up.

Down

Push the head restraint down while

pressing the lock release button.

Front seats only: Angle adjustment (if
equipped)

To fold the head restraints, pull the lock
release strap.

To return the head restraints, lift them up

until they lock.

Head restraints are provided for all seats.

Front and second seats

Lock release button

Third seats (manual seat)

GX460_OM_OM60R43U_(U)

151