Lexus GX460 (2023 year). Manual in english - page 3

■

The meters and display illuminate when

The engine switch is in IGNITION ON mode.

■

Instrument cluster brightness adjustment

The instrument cluster brightness levels when the tail lights are on and off can be

adjusted.

■

The brightness of the instrument cluster lights

When the tail lights are on, the brightness will change. However, when the surroundings

are bright (daytime, etc.) turning on the tail lights will not change the instrument cluster

brightness.

In addition, the brightness of the instrument cluster lights is automatically adjusted based

on the light sensor detecting how bright the surroundings are.

■

Customization

The meter display can be customized on the multi-information display. (

P. 604)

WARNING

■

The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal information

display. At extremely low temperatures, the information display monitor may respond

slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number

appearing on the display. This lag could cause the driver to downshift again, causing

rapid and excessive engine braking and possibly an accident resulting in death or

injury.

NOTICE

■

To prevent damage to the engine and its components

●

Do not let the indicator needle of the tachometer enter the red zone, which indicates

the maximum engine speed.

●

The engine may be overheating if the engine coolant temperature gauge is in the red

zone (H). In this case, immediately stop the vehicle in a safe place, and check the

engine after it has cooled completely. (



P. 573)

GX460_OM_OM60R43U_(U)

Instrument cl

Multi-information display

The following information will be dis-
played when a menu icon is selected.
(

P. 92)

Some of the information may be dis-
played automatically depending on the
situation.

Drive information

Select to display various drive data. (



P. 93)

Vehicle information display

Select to display the vehicle information. (



P. 94)

Driving assist system information

Select to display the operational status of the following systems:

• Dynamic radar cruise control (



P. 255)

• LDA (Lane Departure Alert) (

P. 247)

Warning message display

Select to display warning messages and measures to be taken if a malfunction is

detected. (



P. 544)

Settings display

Select to change the meter display settings and the operation settings of some

vehicle functions. (

P. 95)

Display contents

GX460_OM_OM60R43U_(U)

The multi-information display is operated using the meter control switches.

: Switch menu

: Change displayed con-

tent, scroll up/down the
screen and move the
cursor up/down

Press: Enter/Set
Press and hold: Reset
Return to the previous screen
Press: Displays the screen registered to

When no screen has been registered, the drive information screen will be dis-

played.

Press and hold: Registers the currently displayed screen to

When the confirmation screen is displayed, select yes to register the screen. If the

selected screen cannot be registered, a registration failure message will be shown.

Operating the meter control switches

3
4

GX460_OM_OM60R43U_(U)

Instrument cl

■

After Start

●

Average fuel economy

Displays the average fuel consumption since the engine was started.

●

Average vehicle speed
Displays the average vehicle speed since the engine was started.

●

Elapsed time
Displays the elapsed time since the engine was started.

: Use the displayed average fuel economy as a reference.

■

After Reset

●

Current fuel economy
Displays the current rate of fuel consumption.

●

Average fuel economy

1, 2

Displays the average fuel consumption since the function was reset.

●

Average vehicle speed

Displays the average vehicle speed since the function was reset.

●

Elapsed time

Displays the elapsed time since the function was reset.

: Use the displayed average fuel economy as a reference.

: Pressing and holding

will reset.

■

After Refuel

●

Range

1, 2

Displays the driving range with remaining fuel.

●

Average fuel economy

2, 3

Displays the average fuel consumption since the vehicle was refueled.

: This distance is computed based on your average fuel consumption. As a result,

the actual distance that can be driven may differ from that displayed.

: When only a small amount of fuel is added to the tank, the display may not be

updated. When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.

: Use the displayed average fuel economy as a reference.

Drive information

GX460_OM_OM60R43U_(U)

■

Eco Indicator (Eco Driving Indicator Zone Display)



P. 96

■

Speed

Displays the vehicle speed.

■

Sway warning

Detects the sway of the vehicle within a lane, which is often associated with a
decrease in the driver’s attention level, and displays the decrease in attention
using a bar display.
The shorter the bar length, the more the driver may need to rest.

This display is a part of the LDA (Lane Departure Alert) system. The display is

enabled when the operating conditions of the vehicle sway warning function are

met. (

P. 247)

■

Blank screen (display off)

Drive information is not displayed.

■

Front tire angle

Displays the direction of the front tires.

The tire direction is displayed in 3 stages for both left and right, in accordance with

the angle of the tire.
If a battery terminal is disconnected and reconnected, the display may be disabled

temporarily. After driving the vehicle for a while, the display will be enabled.

■

Tire inflation pressure

Displays inflation pressure of each tire.

The inflation pressure of the spare tire will also be displayed.

Vehicle information

GX460_OM_OM60R43U_(U)

Instrument cl

The settings of the following items can be changed. (



P. 604)

For functions that can be enabled or disabled, the function switches between on and
off each time

is pressed.

■

LDA (Lane Departure Alert) (

P. 247)

■

BSM (Blind Spot Monitor) (



P. 374)

■

PCS (Pre-Collision System) (

P. 237)

■

Intuitive parking assist (

P. 267)

■

Rear Seat Reminder (



P. 114)

■

Vehicle settings

●

Tire pressure warning system (



P. 489)

●

Scheduled maintenance

(



P. 465)

●

Oil maintenance (



P. 478)

■

Meter settings

Select to set the following items.

●

Language
Select to change the language on the display.

●

Units
Select to change the unit for measure.

●

Eco Driving Indicator Light

Select to activate/deactivate the Eco Driving Indicator Light.

●

Switch settings

You can register 1 screen as the top screen. To register, press and hold
while the desired screen is displayed.

●

Initialization
Registered or changed meter settings will be deleted or returned to their
default setting.

: If equipped

Settings display

GX460_OM_OM60R43U_(U)

■

Eco Driving Indicator

●

The shift lever is in any position other than D.

●

Vehicles with adaptive variable suspension system: The driving mode is set to sport

mode.

●

The vehicle speed is approximately 81 mph (130 km/h) or higher.

■

When disconnecting and reconnecting battery terminals

The drive information other than the current fuel consumption will be reset.

■

Tire inflation pressure

●

It may take a few minutes to display the tire inflation pressure after the engine switch is

turned to IGNITION ON mode. It may also take a few minutes to display the tire infla-

tion pressure after inflation pressure has been adjusted.

●

“---” may be displayed if the tire information cannot be determined due to unfavorable

radio wave conditions.

●

Tire inflation pressure changes with temperature. The displayed values may also be dif-

ferent from the values measured using a tire pressure gauge.

■

When setting up the display

Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P.

■

Suspension of the settings display

In the following situations, the settings display using the meter control switches will be

suspended.

●

When a warning message appears on the multi-information display

●

When the vehicle begins to move

■

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic

of liquid crystal displays, and there is no problem continuing to use the display.

Eco Driving Indicator Light
During Eco-friendly acceleration operation

(Eco driving), the Eco Driving Indicator Light

will turn on. When the acceleration exceeds

Zone of Eco driving, or when the vehicle is

stopped, the light turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current

Eco driving ratio based on acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds Zone of Eco driv-

ing, the right side of Eco Driving Indicator

Zone Display will illuminate.
Zone of Eco driving

Eco Driving Indicator will not operate under the

following conditions:

GX460_OM_OM60R43U_(U)

Instrument cl

WARNING

■

Caution for use while driving

For safety, avoid operating the meter control switch while driving as much as possible,

and do not look continuously at the multi-information display while driving. Stop the

vehicle and operate the meter control switch. Failure to do so may cause a steering

wheel operation error, resulting in an unexpected accident.

■

Cautions while setting up the display

As the engine needs to be running during setting up the display, ensure that the vehicle

is parked in a place with adequate ventilation. In a closed area such as a garage,

exhaust gases including harmful carbon monoxide (CO) may collect and enter the

vehicle. This may lead to death or a serious health hazard.

NOTICE

■

While setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the dis-

play features.

GX460_OM_OM60R43U_(U)

Instrument cl

Press the “MENU” button on the Remote Touch, then select

on the screen,

and then select “Trip Information” or “History”.
This system can also be operated by the touch screen.

■

Trip information

If a screen other than “Trip Information” is displayed, select “Trip Information”.

Resetting the consumption data
Fuel consumption in the past 15
minutes
Current fuel consumption
Average vehicle speed since the
engine was started.
Elapsed time since the engine
was started.
Cruising range

Average fuel consumption for the past 15 minutes is divided by color into past

averages and averages attained since the engine switch was last turned to IGNI-

TION ON mode. Use the displayed average fuel consumption as a reference.
The image is an example only, and may vary slightly from actual conditions.

■

History

If a screen other than “History” is displayed, select “History”.

Best recorded fuel consumption
Latest fuel consumption
Previous fuel consumption record
Resetting the history data
Updating the latest fuel con-
sumption data

The average fuel consumption his-

tory is divided by color into past

averages and the average fuel con-

sumption since the last updated. Use

the displayed average fuel consump-

tion as a reference.
The image is an example only, and may vary slightly from actual conditions.

Consumption

3
4

2
3
4
5

100

GX460_OM_OM60R43U_(U)

■

Updating the history data

Update the latest fuel consumption by selecting “Update” to measure the current fuel

consumption again.

■

Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■

Cruising range

Displays the estimated maximum distance that can be driven with the quantity of fuel

remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.

GX460_OM_OM60R43U_(U)

101

Instrument cl

Display the vehicle information on the side display (



P. 404), and then select

to display the desired screen.

■

Trip information (type A)

Displays the average fuel consump-
tion for the past 10 minutes in 1 min-
ute intervals, as well as the cruising
range.

The image is an example only, and

may vary slightly from actual condi-

tions.
Use the displayed average fuel con-

sumption as a reference.

■

Trip information (type B)

Displays the cruising range, latest
fuel consumption and the amount of
time elapsed since the engine was
started.

The image is an example only, and

may vary slightly from actual condi-

tions.
Use the displayed average fuel con-

sumption as a reference.

■

History

Displays the average fuel consump-
tion and highest fuel consumption.

The image is an example only, and

may vary slightly from actual condi-

tions.
Use the displayed average fuel con-

sumption as a reference.

Using the side display

103

GX460_OM_OM60R43U_(U)

Operation of

each component

3-1. Key information

Keys.................................................. 104

3-2. Opening, closing and

locking the doors

Side doors......................................108
Back door.........................................116
Glass hatch......................................121
Smart access system with

push-button start.......................126

3-3. Adjusting the seats

Front seats...................................... 132
Rear seats....................................... 134
Driving position memory......... 145
Head restraints ............................150

3-4. Adjusting the steering

wheel and mirrors

Steering wheel ............................. 153
Inside rear view mirror ............. 155
Outside rear view mirrors........157

3-5. Opening, closing the windows

and moon roof

Power windows ........................... 160
Moon roof...................................... 163

104

GX460_OM_OM60R43U_(U)

3-1. Key information

Keys

The following keys are provided with the vehicle.

Electronic keys

• Operating the smart access system

with push-button start (



P. 126)

• Operating the wireless remote con-

trol function

Mechanical keys
Key number plate

Locks the doors (



P. 108)

Unlocks the doors (



P. 108)

Opens the windows and moon roof

(

P. 108)

Opens the glass hatch (



P. 121)

Sounds the alarm (

P. 105)

: These settings must be customized at your Lexus dealer.

The keys

2
3

Wireless remote control

2
3

4
5

GX460_OM_OM60R43U_(U)

105

3-1. Key information

To take out the mechanical key, push
the release button and take the key out.

The mechanical key can only be

inserted in one direction, as the key only

has grooves on one side. If the key can-

not be inserted in a lock cylinder, turn it

over and re-attempt to insert it.
After using the mechanical key, store it

in the electronic key. Carry the mechan-

ical key together with the electronic key.

If the electronic key battery is depleted

or the entry function does not operate

properly, you will need the mechanical

key. (

P. 567)

■

Panic mode

■

When required to leave the vehicle’s key with a parking attendant

Lock the glove box as circumstances demand. (

P. 424)

Remove the mechanical key for your own use and provide the attendant with the elec-

tronic key only.

■

If you lose your mechanical keys

New genuine mechanical keys can be made by your Lexus dealer using another

mechanical key and the key number stamped on your key number plate. Keep the plate

in a safe place such as your wallet, not in the vehicle.

Using the mechanical key

When

is pressed for longer than about

one second, an alarm will sound intermittently

and the vehicle lights will flash to deter any per-

son from trying to break into or damage your

vehicle.
To stop the alarm, press any button on the elec-

tronic key.

106

GX460_OM_OM60R43U_(U)

3-1. Key information

■

When riding in an aircraft

When bringing an electronic key onto an aircraft, make sure you do not press any but-

tons on the electronic key while inside the aircraft cabin. If you are carrying an electronic

key in your bag etc., ensure that the buttons are not likely to be pressed accidentally.

Pressing a button may cause the electronic key to emit radio waves that could interfere

with the operation of the aircraft.

■

Electronic key battery depletion

●

The standard battery life is 1 to 2 years.

●

If the battery becomes low, an alarm will sound in the cabin when the engine is stopped.

●

As the electronic key always receives radio waves, the battery will become depleted

even if the electronic key is not used. The following symptoms indicate that the elec-

tronic key battery may be depleted. Replace the battery when necessary. (



P. 507)

• The smart access system with push-button start or the wireless remote control does

not operate.

• The detection area becomes smaller.

• The LED indicator on the key surface does not turn on.

●

To avoid serious deterioration, do not leave the electronic key within 3 ft. (1 m) of the

following electrical appliances that produce a magnetic field:
• TVs

• Personal computers

• Cellular phones, cordless phones and battery chargers

• Recharging cellular phones or cordless phones

• Table lamps

• Induction cookers

●

Battery-saving mode can reduce the power consumption of electronic keys that are not

used for long periods of time. (

P. 128)

■

Replacing the battery

P. 507

GX460_OM_OM60R43U_(U)

107

NOTICE

■

To prevent key damage

●

Do not drop the keys, subject them to strong shocks or bend them.

●

Do not expose the keys to high temperatures for long periods of time.

●

Do not get the keys wet or wash them in an ultrasonic washer etc.

●

Do not attach metallic or magnetic materials to the keys or place the keys close to

such materials.

●

Do not disassemble the keys.

●

Do not attach a sticker or anything else to the surface of the electronic key.

●

Do not place the keys near objects that produce magnetic fields, such as TVs, audio

systems and induction cookers.

●

Do not place the keys near medical electrical equipment such as low-frequency ther-

apy equipment or microwave therapy equipment, and do not receive medical atten-

tion with the keys on your person.

■

Carrying the electronic key on your person

Carry the electronic key 3.9 in. (10 cm) or more away from electric appliances that are

turned on. Radio waves emitted from electric appliances within 3.9 in. (10 cm) of the

electronic key may interfere with the key, causing the key to not function properly.

■

In case of a smart access system with push-button start malfunction or other key-

related problems

Take your vehicle with all the electronic keys provided with your vehicle to your Lexus

dealer.

■

When an electronic key is lost

If the electronic key remains lost, the risk of vehicle theft increases significantly. Visit

your Lexus dealer immediately with all remaining electronic keys that were provided

with your vehicle.

108

GX460_OM_OM60R43U_(U)

Side doors

◆

Smart access system with push-button start

Carry the electronic key to enable this function.

Grip the driver’s door handle to
unlock the door. Grip the passen-
ger’s door handle to unlock all the
doors.

Make sure to touch the sensor on the

back of the handle.
The doors cannot be unlocked for

3 seconds after the doors are locked.

: The door unlock settings can be

changed. (

P. 113)

Touch the lock sensor (the indentation on the upper part or lower part of
the front door handle) to lock the doors.

Check that the door is securely locked.

◆

Wireless remote control

Locks all the doors

Check that the door is securely

locked.

Unlocks all the doors

Pressing the button unlocks the

driver’s door. Pressing the button

again within 3 seconds unlocks the

other doors.
Press and hold to open the windows

and moon roof.

: These settings must be customized at your Lexus dealer.

The vehicle can be locked and unlocked using the entry function, wireless
remote control, key or door lock switch.

Locking and unlocking the doors from the outside

GX460_OM_OM60R43U_(U)

109

■

Operation signals

Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have

been locked/unlocked. (Locked: once; Unlocked: twice)
Windows and moon roof: A buzzer sounds to indicate that the windows and moon roof

are operating.

■

Security feature

If a door or the glass hatch is not opened within approximately 60 seconds after the vehi-

cle is unlocked, the security feature automatically locks the vehicle again.

■

When the door cannot be locked by the lock sensor on the upper part of the door han-

dle

■

Door lock buzzer

If an attempt to lock the doors is made when a door and/or the glass hatch is not fully

closed, a buzzer sounds continuously. Fully close the door and/or the glass hatch to stop

the buzzer, and lock the vehicle once more.

■

Setting the alarm

Locking the doors will set the alarm system. (



P. 77)

■

If the smart access system with push-button start or the wireless remote control does

not operate properly

●

Use the mechanical key to lock and unlock the doors. (

P. 567)

●

Replace the battery with a new one if it is depleted. (



P. 507)

If the door will not lock even when the topside

sensor area is touched, try touching both the

topside and underside sensor areas at the same

time.
When gloves are being worn, remove the

gloves.

110

GX460_OM_OM60R43U_(U)

◆

Door lock switches

Locks all the doors
Unlocks all the doors

◆

Inside lock buttons

Locks the door
Unlocks the door

The front doors can be opened by

pulling the inside handle even if the

lock button is in the lock position.

Locking and unlocking the doors from the inside

GX460_OM_OM60R43U_(U)

111

Move the inside lock button to the lock position.
Close the door.

The door cannot be locked if the engine switch is in ACCESSORY or IGNITION

ON mode, or the electronic key is left inside the vehicle. However, the key may not be

detected correctly and the door may be locked.

The door cannot be opened from inside
the vehicle when the lock is set.

Unlock
Lock

These locks can be set to prevent chil-

dren from opening the rear doors. Push

down on each rear door switch to lock

both rear doors.

Locking the front doors from the outside without a key

Rear door child-protector lock

112

GX460_OM_OM60R43U_(U)

The following functions can be set or canceled:

For instructions on customizing, refer to P. 604.

Automatic door locking and unlocking systems

Function

Operation

Shift position linked door lock-

ing function

Shifting the shift lever out of P locks all the doors.

Shift position linked door

unlocking function

Shifting the shift lever to P unlocks all the doors.

Speed linked door locking

function

All the doors are locked when the vehicle speed is

approximately 12 mph (20 km/h) or higher.

Driver’s door linked door

unlocking function

All the doors are unlocked when the driver’s door is

opened within 43 seconds after turning the engine

switch off.

GX460_OM_OM60R43U_(U)

113

■

Changing the door unlock function setting

It is possible to set which doors the entry function unlocks using the wireless remote con-

trol.

Turn the engine switch off.
When the indicator light on the key surface is not on, press and hold

for approximately 5 seconds while pressing and holding

The setting changes each time an operation is performed, as shown below. (When

changing the setting continuously, release the buttons, wait for at least 5 seconds, and

repeat step .)

To prevent unintended triggering of the alarm, unlock the doors using the wireless

remote control and open and close a door once after the settings have been changed. (If
a door or the glass hatch is not opened within 60 seconds after

is pressed, the

doors will be locked again and the alarm will automatically be set.)

In a case that the alarm is triggered, immediately stop the alarm. (



P. 77)

Multi-information

display

Unlocking function

Beep

Holding the driver’s door handle

unlocks only the driver’s door.

Exterior: Beeps 3 times

Interior: Pings once

Holding the front passenger’s

door handle unlocks all the

doors.

Holding either front door handle

unlocks all the doors.

Exterior: Beeps twice

Interior: Pings once

114

GX460_OM_OM60R43U_(U)

■

Impact detection door lock release system

In the event that the vehicle is subject to a strong impact, all the doors are unlocked.

Depending on the force of the impact or the type of accident, however, the system may

not operate.

■

Using the mechanical key

The doors can also be locked and unlocked with the mechanical key. (



P. 567)

■

If a symbol indicating one or more doors are open is shown on the multi-information dis-

play

The hood or one or more of the doors or glass hatch are not fully closed. The system also

indicates which doors are not fully closed. If the vehicle reaches a speed of 3 mph (5 km/

h), a buzzer sounds to indicate that the door(s) are not yet fully closed.
Make sure that the hood, all the doors and glass hatch are closed.

■

Conditions affecting the operation of the smart access system with push-button start

or wireless remote control

P. 128

■

Rear seat reminder function

●

In order to remind you not to forget luggage, etc. in the rear seat, when the engine

switch is turned off after any of the following conditions are met, a message will be dis-

played on the multi-information display for approximately 6 seconds.
• The engine is started within 10 minutes after opening and closing a rear door.

• A rear door has been opened and closed after the engine was started.

However, if a rear door is opened and then closed within approximately 2 seconds, the

rear seat reminder function may not operate.

●

The rear seat reminder function determines that luggage, etc. has been placed in a rear

seat based on opening and closing of a rear door. Therefore, depending on the situa-

tion, the rear seat reminder function may not operate and you may still forget luggage,

etc. in the rear seat, or it may operate unnecessarily.

●

The rear seat reminder function can be enabled/disabled. (



P. 611)

■

Customization

Settings (e.g. unlocking function using a key) can be changed.

(Customizable features:



P. 604)

GX460_OM_OM60R43U_(U)

115

WARNING

■

To prevent an accident

Observe the following precautions while driving the vehicle.

Failure to do so may result in a door opening and an occupant being thrown out of the

vehicle, resulting in death or serious injury.

●

Ensure that all doors are properly closed and locked.

●

Do not pull the inside handle of the doors while driving.

Be especially careful for the front doors, as the doors may be opened even if the

inside lock buttons are in locked position.

●

Set the rear door child-protector locks when children are seated in the rear seats.

■

When using the wireless remote control and operating the power windows or moon

roof

Operate the power window or moon roof after checking to make sure that there is no

possibility of any passenger having any of their body parts caught in the window or

moon roof. Also, do not allow children to operate the wireless remote control. It is pos-

sible for children and other passengers to get caught in the power window or moon

roof.

116

GX460_OM_OM60R43U_(U)

Back door

◆

Smart access system with push-button start

Carry the electronic key to enable this function.

Locks all the doors

Check that the door is securely

locked.

Unlocks all the doors

The doors cannot be unlocked for 3

seconds after the doors are locked.

◆

Wireless remote control



P. 108

◆

Door lock switch



P. 110

The back door can be locked/unlocked and opened by the following proce-
dures.

Locking and unlocking the back door from the outside

Locking and unlocking the back door from the inside

GX460_OM_OM60R43U_(U)

117

Pull the handle
Open the back door

The back door can be kept open at a

desired position.

Unlocks the back door stopper
Locks the back door stopper

The back door stopper can only be

operated when the back door is fully

open.
When closing the back door, check that

the back door stopper is unlocked.

Close the back door using the back
door handle, and make sure to push the
back door from the outside to close it.

Opening the back door from the outside

Keeping the back door open

When closing the back door

118

GX460_OM_OM60R43U_(U)

The rear step bumper is for rear end
protection and easier step-up loading.

Rear step bumper

WARNING

■

While driving

●

Keep the back door closed while driving.

If the back door is left open, it may hit near-by objects while driving or luggage may

be unexpectedly thrown out, causing an accident.

In addition, exhaust gases may enter the vehicle, causing death or a serious health

hazard. Make sure to close the back door before driving.

●

Before driving the vehicle, make sure that the back door is fully closed. If the back

door is not fully closed, it may open unexpectedly while driving, causing an accident.

●

Never let anyone sit in the luggage compartment. In the event of sudden braking,

sudden swerving or a collision, they are susceptible to death or serious injury.

■

When children are in the vehicle

Observe the following precautions.

Failure to do so may result in death or serious injury.

●

Do not allow children to play in the luggage compartment.

If a child is accidentally locked in the luggage compartment, they could have heat

exhaustion or other injuries.

●

Do not allow a child to open or close the back door.

Doing so may cause the back door to move unexpectedly, or cause the child’s hands,

head, or neck to be caught by the closing back door.

GX460_OM_OM60R43U_(U)

119

WARNING

■

Operating the back door

Observe the following precautions.

Failure to do so may cause parts of the body to be caught, resulting in death or serious

injury.

●

When opening or closing the back door, thoroughly check to make sure the sur-

rounding area is safe.

●

If anyone is in the vicinity, make sure they are safe and let them know that the back

door is about to open or close.

●

Use caution when opening or closing the back door in windy weather as it may move

abruptly in strong wind.

●

The back door may suddenly shut if the back

door stopper is not locked. It is more difficult

to open or close the back door on an incline

than on a level surface, so beware of the back

door unexpectedly opening or closing by

itself. Make sure that the back door stopper is

locked and secure before using the luggage

compartment.

●

Even with the back door stopper locked, the

back door stopper may unlock and the back

door may close when excessive force such as

a strong wind is applied to the back door. Take

extra care to prevent any part of your body

from being caught.

●

When closing the back door, take extra care

to prevent your fingers etc. from being

caught. Also pay attention to your personal

belongings such as bags and ties.

●

When closing the back door, make sure to

press it lightly on its outer surface. If the back

door handle is used to fully close the back

door, it may result in hands or arms being

caught.

120

GX460_OM_OM60R43U_(U)