Content .. 43 44 45 46 ..

AUTOMOTIVE INDUSTRY RETAIL, SERVICE & REPAIR - part 45

AURT2833A Service gas fuel systems (CNG/NGV)

ELEMENT PERFORMANCE

CRITERIA

Clean up work area and
maintain equipment
(continued)

3.5

Operator maintenance is completed in accordance with
manufacturer/component supplier specifications and site
procedures

3.6

Tooling is maintained in accordance with workplace
procedures

RANGE STATEMENT

The Range Statement provides advice to interpret the scope and context of this unit of
competency, allowing for differences between enterprises and workplaces. It relates to the unit
as a whole and facilitates holistic assessment. The following variables may be present for this
particular unit:

CNG/NGV fuel supplied
vehicles

• The servicing of Natural Gas (CNG)/ Natural Gas Vehicle

(NGV) fuel systems to light, heavy vehicles, vessels, out
door power equipment and forklift trucks

Unit scope

•

Work involves visual inspection and assembling. Methods
should be applied under normal operating conditions

Unit context

• OH&S requirements include Australian Standards, safety

management systems, hazardous substances and dangerous
goods code, safe operating procedures

• Work is carried out in accordance with legislative

obligations, environmental legislation, relevant health
regulations, manual handling procedures and organisation
insurance requirements

• Work requires individuals to demonstrate discretion,

judgement and problem solving skills in servicing of
CNG/NGV systems

• Competency may be demonstrated in workplaces involved

in the servicing of CNG/NGV fuel supply vehicles

Tools and equipment

•

Tools and equipment are to include hand tools, exhaust gas
analyser, pressure/vacuum gauge, multimeter, leak
detector

Material

•

Material are to include replacement components,
CNG/NGV and cleaning material

Personal protective
equipment

•

Personal protective equipment is to include that prescribed
under legislation, regulations and enterprise policies and
practices, footwear, clothing and gloves

Automotive Industry RS&R

AURT2833A Service gas fuel systems (CNG/NGV)

©Australian National Training Authority

AUR99 Version 4.00 Review by 30 June 2004

315

RANGE STATEMENT

Information and
procedures

• Workplace procedures relating to the use of tools and

equipment

• Work instructions, including job sheets, material safety

data sheets and service manuals

• Workplace procedures relating to reporting and

communication including maintaining customer records

• Manufacturer/component supplier specifications and

operational procedures

EVIDENCE GUIDE

The Evidence Guide identifies the critical aspects, knowledge and skills to be demonstrated to
confirm competency for this unit. This is an integral part of the assessment of competency and
should be read in conjunction with the Range Statement.

Critical aspects of
evidence

• Interpret work order and locate and apply relevant

information

• Apply safe handling requirements for equipment, products

and material, including use of personal protective
equipment

• Read and interpret installation instructions, job sheets,

material safety data sheets and service manuals

• Identify material used in the work process

• Follow work instructions, operating procedures and

inspection processes to:

• minimise the risk of injury to self and others

• prevent damage and wastage of goods, equipment and

products

• maintain required production output and product quality

• Identify, set up, operate and maintain CNG/NGV fitting

cleaning and testing equipment

• Conduct operator maintenance on service equipment and

hand tools

• Work effectively with others

• Modify activities to cater for variations in workplace

context and environment

AURT2833A Service gas fuel systems (CNG/NGV)

EVIDENCE GUIDE

Underpinning knowledge

• The types, characteristics, uses and limitations of:

• Principles of operation of gas fuel systems

• Servicing procedures

• Equipment/material safety requirements

• Personal safety procedures

• Legislation where applicable

• Industry codes of practice

• Australian Standards – AS1425, AS2739, AS2746

• Planning correct processes and techniques for servicing

CNG/NGV fuelled vehicles/components

• Workplace guidelines regarding Australian Standards

• Workplace safety policies and procedures

• Procedures for reporting equipment faults and material

defects

Underpinning skills

These include a number of processes that are learnt throughout work and life, which are
required in most jobs. Some of these are covered by the national key competencies, although
others may be added. The questions below highlight how these processes are applied in this
competency unit. The number in brackets indicates the level to which the key competency
needs to be demonstrated where (1) is where work is within set conditions and process, (2) is
where the management or facilitation of conditions or process is exercised, and (3) is where
the design and/or development of conditions or process is required.

How will the candidate
apply the following key
competency in this unit?

The candidate will need to:

Collect, analyse and
organise information

Collect, organise and understand information related to
CNG/NGV service and replacement procedures, work orders,
plans and safety procedures for fabricating a component or piece
of equipment.

(Level 1)

Communicate ideas and
information

Communicate ideas and information to enable confirmation of
work requirements and specifications, coordination of work with
site supervisor, other workers and customers, and the reporting
of work outcomes and problems.

(Level 1)

Automotive Industry RS&R

AURT2833A Service gas fuel systems (CNG/NGV)

©Australian National Training Authority

AUR99 Version 4.00 Review by 30 June 2004

317

EVIDENCE GUIDE

Underpinning skills (continued)

Plan and organise
activities

Plan and organise activities including the preparation and layout
of the worksite and the obtaining of equipment and material to
avoid any back tracking, workflow interruptions or wastage.

(Level 1)

Work with others and in
a team

Work with others and in a team by recognising dependencies
and using cooperative approaches to optimise workflow and
productivity.

(Level 1)

Use mathematical ideas
and techniques

Use mathematical ideas and techniques to correctly complete
measurements and estimate material requirements.

(Level 1)

Solve problems

Use pre-checking and inspection techniques to anticipate planing
and cleaning problems, avoid re working and avoid wastage.

(Level 1)

Use technology

Use the workplace technology related to CNG/NGV vehicle
servicing including tools and equipment.

(Level 1)

EVIDENCE GUIDE

Resource implications

•

Access to CNG/NGV fuel supplied vehicles and/or
components as identified in the Range Statement, standard
operating procedures

Method of assessment

•

Assessment methods must confirm consistency of
performance over time and in a range of workplace
relevant contexts

•

Assessment should be by direct observation of tasks and
may include electronic, verbal, written or questioning on
underpinning knowledge

•

Assessment should be conducted over time and may be in
conjunction with assessment of other units of competency

Context/s of assessment

•

Assessment may occur on the job or in a workplace
simulated facility with relevant process equipment,
material, work instructions and deadlines

©Australian National Training Authority

AUR99 Version 4.00 Review by 30 June 2004

319

AURT3501A

Implement and monitor environmental
regulations and best practice in the marine
repair industry

Unit descriptor

This unit covers the competency to undertake the repair,
maintenance and installation of marine craft engines and or
components and electrical systems in a manner that ensures
the protection of the environment.

ELEMENT PERFORMANCE

CRITERIA

1. Implement relevant

environment regulations

1.1

Reasons for ethical environmental practice in a marine
maintenance, repair and installation workplace are
identified

1.2

Environmental responsibilities of employees in a
marine maintenance, repair and installation workplace
are identified

1.3

Penalties for individual breaches of the legislation are
identified

1.4

Waste is minimised, wastes including biological
material (marine biota), sludge and solids are sorted
and stored in appropriate bins for recycling or disposal

2. Monitor and avoid

hazards to stormwater,
foreshores and marine
environments

2.1

No wastewater or contaminants are allowed to enter
stormwater systems, foreshores or marine
environments

2.2

All vessel, engine and component repairs, maintenance
and installation are undertaken in an environmentally
responsible manner to avoid hazards to stormwater
systems, foreshores and marine environments

2.3

Engine and component cleaning is carried out in an
area that is bunded or graded to a collection pit

2.4

All preparation areas, in particular anti-foulant paint
preparation, are bunded and undercover to ensure
accidental spillage cannot escape into stormwater
systems, foreshores and marine environments

2.5

All components containing environmentally hazardous
material are stored undercover in a sealed and bunded
area

2.6

All liquid wastes are drained into appropriate storage
or recycling containers

2.7

Bilge water is disposed of in an appropriate manner

AURT3501A Implement and monitor environmental regulations

Automotive Industry RS&R

and best practice in the marine repair industry

320

AUR99 Version 4.00 Review by 30 June 2004

ELEMENT PERFORMANCE

CRITERIA

2. Monitor

and

avoid

hazards to stormwater,
foreshores and marine
environments
(continued)

2.8

Spill kit is located and used as needed and disposed of
as controlled waste by a licensed contractor to prevent
stormwater, foreshore pollution and damage to the
marine environment

2.9

Spills are cleaned up immediately and the workplace is
kept clean to prevent unintentional pollution to
stormwater, foreshores and the marine environment

3. Monitor and avoid

hazards to air quality

3.1

Welding, soldering and thermal cutting is conducted in
a well ventilated area

3.2

Hazards of airborne particles are monitored,
minimised and contained

3.3

Hazards of gases are identified, monitored and
contained

3.4

Clean up of guns and general tools and equipment is
conducted in an environmentally safe manner

4. Monitor and avoid noise

hazards

4.1

Noise generating activities are minimised and carried
out within approved operating hours

RANGE STATEMENT

The Range Statement provides advice to interpret the scope and context of this unit of
competency, allowing for differences between enterprises and workplaces. It relates to the
unit as a whole and facilitates holistic assessment. The following variables may be present
for this particular unit:

Marine maintenance,
repair and installation
workplace

Marine workplace undertaking either generalist or
specialist repairs to marine vessels or components

Unit scope

Work involves the normal activities of a marine
maintenance and repair workplace including the
installation, removal, repair, testing and replacement of
marine craft engines, the installation, removal, repair,
testing and replacement of marine electrical systems
and components, welding, soldering and thermal
cutting of marine components and the removal and
preparation of vessel surfaces and components for
painting with anti-foulant based products

This unit is primarily aimed at those undertaking
qualifications; AUR32199 Marine Installer or
AUR32299 Marine Mechanic

AUR99 Version 4.00 Review by 30 June 2004

321

RANGE STATEMENT

Unit context

• OH&S requirements include safety management systems,

hazardous substances and dangerous goods code and safe
operating procedures

• Work is carried out in accordance with legislative

obligations, environmental legislation, relevant health
regulations, manual handling procedures and organisation
insurance requirements

• Work requires individuals to demonstrate discretion,

judgement and problem solving skills in undertaking
environmentally sound work practices

•

Competency may be demonstrated in workplaces
involved in the repair, maintenance and installation of
marine craft engines, component and electrical systems
and components

Tools and equipment

• Tools and equipment are to include spill kits, recycling

bins and drums, parts washers, bunded wash bays, air
extraction equipment, slipways and hardstand areas with
pollution control measures and diversion valves and
waste water management system

Material

• Material safety data sheets

Personal protective
equipment

• Personal protective equipment is to include that

prescribed under legislation, regulations and enterprise
policies and practices

Information and
procedures

• Environmental legislation, regulations and advice

• Workplace procedures relating to the use of tools and

equipment

• Work instructions, including job sheets/cards

• Workplace procedures relating to reporting and

communication of environmental issues

• Manufacturer/component supplier specifications and

operational procedures

• Site environmental policy

Content .. 43 44 45 46 ..