|
|
MULTIFUNCTION GAUGE REGULATORY
INFORMATION
Technical Information
Transmitter:
- BT operating frequency range: 2402 - 2480 MHz
- BT version: 5.0
- BT max transmit power: +8 dBm
Manufacturer and Address
Manufacturer:
- Enovation Controls LLC
Address:
-
5311 S 122nd E. Ave. Tulsa,
OK 74146,
USA
To display the regulatory information on the vehicle digital display:
From the app menu, go to Preferences / General / About.
USA and Canada
This device complies with FCC Part 15 and Industry Canada license
exempt RSS standard (s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada appli-
cables aux appareils radio exempts de licence. L'exploitation est au-
torisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectri-
que subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the
equipment.
IC: 28102-ECB01
FCC ID: 2A3FV-ECB01
RF exposure:
- The equipment complies with FCC RF exposure limits set forth for
an uncontrolled environment.
- This equipment must be installed and operated with a separation
distance of at least 20 cm from all persons.
280
MULTIFUNCTION GAUGE REGULATORY INFORMATION
- The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Mexico
IFETEL
Marca: Enovation Controls
Modelo(s): OD1025-01
Número: RCPENOD22-2195
NOM-208-SCFl-2016 (Disposición Técnica IFT-008-2015)
La operación de este equipo está sujeta a las siguientes dos condi-
ciones: (1) es posible que este equipo o dispositivo no cause interfer-
encia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no
deseada.
Brazil
15742-23-14024
Este equipamento opera em caráter secundário, isto é, não tem direito
a proteção contra interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário.
Japan
This device is granted pursuant to the Japanese Radio Law (
)
and the Japanese Telecommunications Business Law
(
). This device should not be modified (otherwise the
granted designation number will become invalid).
Europe
Declaration of Conformity
281
MULTIFUNCTION GAUGE REGULATORY INFORMATION
Simplified EU Declaration of Conformity according Radio Equipment
Directive 2014/53/EU.
DE
Hiermit erklärt Enovation Controls LLC, dass der Funkanlagentyp OD1025-01 der Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:
FR
Le soussigné, Enovation Controls LLC, déclare que l'équipement radioélectrique du type OD1025-01 est
conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à
l'adresse internet suivante: https://www.brp.com/en/sustainability/product-responsibility.html
BG
Enovation Controls LLC
,
OD1025-01
2014/53/.
:
EL
Με την παρούσα ο/η Enovation Controls LLC, δηλώνει ότι ο ραδιοεξοπλισ×όØ OD1025-01 πληροί την οδηγία 2014/53/EE.
Το πλήρεØ κεί×ενο τηØ δήλωσηØ συ××όρφωσηØ ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:
CS
Tímto Enovation Controls LLC prohlašuje, že typ rádiového zařízení OD1025-01 je v souladu se směrnicí 2014/53/EU.
Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese:
DA
Hermed erklærer Enovation Controls LLC, at radioudstyrstypen OD1025-01 er i overensstemmelse med direktiv
2014/53/EU.
EU-overensstemmelseserklæringens fulde tekst kan ðndes på følgende internetadresse:
ET
Käesolevaga deklareerib Enovation Controls LLC, et käesolev raadioseadme tüüp OD1025-01 vastab direktiivi
2014/53/EL nõuetele.
ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:
ES
Por la presente, Enovation Controls LLC declara que el tipo de equipo radioeléctrico OD1025-01 es conforme
con la Directiva 2014/53/UE.
El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente:
FI
Enovation Controls LLC vakuuttaa, että radiolaitetyyppi OD1025-01 on direktiivin 2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa:
EN
Hereby, Enovation Controls LLC declares that the radio equipment type OD1025-01 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
HR
Enovation Controls LLC ovime izjavljuje da je radijska oprema tipa OD1025-01 u skladu s Direktivom 2014/53/EU.
Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi:
HU
Enovation Controls LLC igazolja, hogy a OD1025-01 típusú rádióberendezés megfelel a 2014/53/EU irányelvnek.
Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen:
IT
Il fabbricante, Enovation Controls LLC, dichiara che il tipo di apparecchiatura radio OD1025-01 è conforme
alla direttiva 2014/53/UE.
Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet:
282
MULTIFUNCTION GAUGE REGULATORY INFORMATION
LT
Aš, Enovation Controls LLC, patvirtinu, kad radijo įrenginių tipas OD1025-01 atitinka Direktyvą 2014/53/ES.
Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu:
LV
Ar šo Enovation Controls LLC deklarē, ka radioiekārta OD1025-01 atbilst Direktīvai 2014/53/ES.
Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē:
MT
B'dan, Enovation Controls LLC, niddikjara li dan it-tip ta' tagħmir tar-radju OD1025-01 huwa konformi mad-Direttiva
2014/53/UE. It-test kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej:
NL
Hierbij verklaar ik, Enovation Controls LLC, dat het type radioapparatuur OD1025-01 conform is met Richtlijn
2014/53/EU.
De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:
PL
Enovation Controls LLC niniejszym oświadcza, że typ urządzenia radiowego OD1025-01 jest zgodny z dyrektywą
2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym:
PT
O(a) abaixo assinado(a) Enovation Controls LLC declara que o presente tipo de equipamento de rádio OD1025-01 está
em conformidade com a Diretiva 2014/53/UE.
O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:
RO
Prin prezenta, Enovation Controls LLC declară că tipul de echipamente radio OD1025-01 este în conformitate cu
Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la următoarea adresă internet:
SV
Härmed försäkrar Enovation Controls LLC att denna typ av radioutrustning OD1025-01 överensstämmer med direktiv
2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse nns på följande webbadress:
SL
Enovation Controls LLC potrjuje, da je tip radijske opreme OD1025-01 skladen z Direktivo 2014/53/EU.
Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:
SK
Enovation Controls LLC týmto vyhlasuje, že rádiové zariadenie typu OD1025-01 je v súlade so smernicou 2014/53/EÚ.
Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese:
IS
Enovation Controls LLC lýsir því hér með yr að þráðlausi arskiptabúnaðurinn OD1025-01 er í samræmi við tilskipun
2014/53/ESB. Óstyttan texta ESB-samræmisyrlýsingarinnar er að nna á ve anginu:
Liechtenstein
Hiermit erklärt Enovation Controls LLC, dass der Funkanlagentyp OD1025-01 der Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:
NO
Hermed erklærer Enovation Controls LLC at radioutstyrstypen OD1025-01 er i samsvar med direktiv 2014/53/EU.
Hele teksten i EU-samsvarserklæringen nnes på følgende internettadresse:
RU
µ¾ÀÉÌÑÒÓ Enovation Controls LLC ÑÌÔÕ¾ÓÖÒÀ ×ÌÓØÙÓÚÕ, ÛÕ¾ ÜÌÝÒ¾ÕÚÞÑÒÛÚÔß¾Ú ¾à¾ÜâݾØÌÑÒÚ
ßÌÕÚä¾ÜÒÒ OD1025-01 ¾ÕØÚÛÌÚÕ ÕÜÚà¾ØÌÑÒÓÀ åÒÜÚßÕÒØæ 2014/53/EU.
ç¾ÙÑæì ÕÚßÔÕ ÝÚßÙÌÜÌíÒÒ Ô¾¾ÕØÚÕÔÕØÒÓ îï ݾÔÕâÉÚÑ ÑÌ ÔÌìÕÚ
283
MULTIFUNCTION GAUGE REGULATORY INFORMATION
This page is intention-
ally blank
284
TECHNICAL
SPECIFICATIONS
285
ENGINE
600R E-TEC
ENGINE
Rotax 600R E-TEC
liquid cooled with
Engine type
reed valves and
electronic RAVE
Number of cylinder
2
72.3 mm
Bore
(2.846 in)
73 mm
Stroke
(2.874 in)
599.4 cm³
Displacement
(36.58 in³)
Maximum power engine speed
8100 ± 100 RPM
FUEL SYSTEM
E-TEC direct
Fuel delivery
injection
Idle speed (not adjustable)
1200 ± 200 RPM
ELECTRICAL SYSTEM
30 A @ 14.5 V
Lighting system output
1340 W @ 6000
RPM
NGK ILKR8Q7S
(engine and spark
Type
plug threads are
indexed)
Spark plug
Not adjustable
Gap
0.6 to 0.7 mm
(.024 to .028 in)
286
ENGINE
LUBRICATION SYSTEM
Electronic oil
Oil injection pump type
injection pump
XPS
XPS 2T E-TEC
recommended
synthetic oil
injection oil
Use a 2-stroke
lubricant designed
for snowmobiles
meeting or
Type
exceeding the
If the XPS
following lubricant
Injection oil
product is not
industry
available
specifications:
- JASO FD
(M345-2004)
- SAE Grade 4 (F
/ M 4)
3.4 l
Quantity
(3.6 qt (liq.,US))
850 E-TEC
ENGINE
Rotax 850 E-TEC
liquid cooled with
Engine type
reed valves and
electronic RAVE
Number of cylinder
2
82 mm
Bore
(3.228 in)
80.4 mm
Stroke
(3.165 in)
287
ENGINE
ENGINE
849 cm³
Displacement
(51.81 in³)
Maximum power engine speed
7900 ± 100 RPM
FUEL SYSTEM
E-TEC direct
injection with
Fuel delivery
integrated auxiliary
injection system
Idle speed (not adjustable)
1200 ± 200 RPM
ELECTRICAL SYSTEM
30 A @ 14.5 V
Lighting system output
1340 W @ 6000
RPM
NGK ILKR8Q7S
(engine and spark
Type
plug threads are
indexed)
Spark plug
Not adjustable
Gap
0.6 to 0.7 mm
(.024 to .028 in)
LUBRICATION SYSTEM
Electronic oil
Oil injection pump type
injection pump
XPS
XPS 2T E-TEC
Injection oil
Type
recommended
synthetic oil
injection oil
288
ENGINE
LUBRICATION SYSTEM
Use a 2-stroke
lubricant designed
for snowmobiles
meeting or
exceeding the
If the XPS
following lubricant
product is not
industry
available
specifications:
- JASO FD
(M345-2004)
- SAE Grade 4 (F
/ M 4)
3.4 l
Quantity
(3.6 qt (liq.,US))
289
VEHICLE
XTerraiin Series
COOLING SYSTEM
XPS
XPS Extended life
recommended
pre-mixed coolant
coolant
Ethyl glycol and
Coolant type
distilled water (50%/
If the XPS
50%)
product is not
or coolant
available
specifically
formulated for
aluminum engines
XTerrain 600R
6.4 l (6.34
E-TEC
qt(liq.,US))
Coolant capacity
XTerrain Series
7.2 l (7.4 qt(liq.,US))
850 E-TEC
FUEL SYSTEM
In-tank electrical
Fuel pump
fuel pump
Premium unleaded
gasoline (fuel which
Type
may contain up to
10% MAX ethanol)
Fuel
91 Pump Posted
Octane rating
AKI ((R+M)/2)
95
(RON)
37 l (39.1
Fuel tank capacity
qt(liq.,US))
ELECTRICAL SYSTEM (Electric Start)
Battery (if equipped)
12 V, 18 A•h
Headlamp
LED
Taillight and stoplight
LED
290
VEHICLE
ELECTRICAL SYSTEM (Electric Start)
Battery (if
F1
30 A
equipped)
F2
Accessory
15 A
Wake up / ECM
F3
/Cluster /
10 A
Fuses
Taillight
F4
Cluster
20 A
F5
Loads
15 A
F6
Start/RER
5A
Relay
RY1
Main Relay
—
DRIVE SYSTEM - CHAINCASE
XPS
XPS Synthetic
recommended
chaincase oil
oil
Type
Chaincase
If the XPS
75W140 gear oil
oil
product is not
that meets the API
available
GL-5 specification
350 ml (12 fl
Capacity
oz(US))
1,6 track profile
23/49/116
Chain drive
ratio
2,0 track profile
23/51/116
DRIVE SYSTEM - PULLEYS
Drive pulley type
pDrive with clickers
XTerrain 600R
3400 ± 100 RPM
E-TEC
Drive pulley engagement
RPM
XTerrain Series
3000 ± 100 RPM
850 E-TEC
291
VEHICLE
DRIVE SYSTEM - PULLEYS
XTerrain 600R
QRS-VENT
E-TEC
Driven pulley type
XTerrain Series
QRS-VENT+
850 E-TEC
DRIVE SYSTEM - TRACK
Drive sprocket number of teeth
8
XTerrain 600R
40.6 cm (16 in)
E-TEC
Width
XTerrain Series
38cm (15 in)or
850 E-TEC
40.6 cm (16 in)
Length
370.5 cm (145.9 in)
Track
XTerrain 600R
51 mm (2 in)
E-TEC
Profile
height
51 mm (2 in)
XTerrain Series
or
850 E-TEC
41 mm (1.6 in)
Track
Deflection
40 mm (1.9/16 in)
adjust
ment(3)
Force
7.3 kgf(16.1 lbf)
BRAKE SYSTEM
Single 200 mm
Brake
Type
cross drilled carbon
steel disc
Type
DOT 4
Brake fluid
65 ml (2.2 fl
Quantity
oz(US))
Fixed twin pistons
Caliper
(2 x 40 mm)
292
VEHICLE
BRAKE SYSTEM
XTerrain 600R
E-TEC
Brake pad material
Organic
XTerrain Series
850 E-TEC
Minimum brake pad thickness (includes
5 mm (.2 in)
backing plate)
Minimum brake disc thickness
4.5 mm (.177
in)
Maximum brake disc warpage
0.25 mm (.01
in)
FRONT SUSPENSION
XTerrain
600R
E-TEC
Suspension type
RAS X
XTerrain
Series 850
E-TEC
XTerrain
600R
E-TEC
Suspension maximum
221 mm
travel
XTerrain
Series 850
E-TEC
XTerrain
600R
HPG
E-TEC
Shock absorber type
XTerrain
KYB PRO 46 HLCR
Series 850
KASHIMA
E-TEC
XTerrain
600R
E-TEC
Stabilizer bar type
Link
XTerrain
Series 850
E-TEC
293
VEHICLE
REAR SUSPENSION
XTerrain 600R
PPS2 DS+
E-TEC
Suspension type
XTerrain Series
PPS3
850 E-TEC
Suspension maximum
291 mm
travel
XTerrain 600R
HPG
E-TEC
Center
XTerrain Series
KYB PRO 46 HLCR
Shock
850 E-TEC
KASHIMA
absorber
type
XTerrain 600R
HPG
E-TEC
Rear
XTerrain Series
KYB PRO 46 HLCR
850 E-TEC
KASHIMA
WEIGHT AND DIMENSIONS
XTerrain 600R
220 kg( 485 lb)
E-TEC
XTerrain Series
850 E-TEC
244 kg( 538 lb)
Mass (dry)
(Display 7.2 ")
XTerrain Series
850 E-TEC
245 kg( 540 lb)
(Display 10.25
")
Overall length
316 cm(124.4 in)
XTerrain 600R
120 cm(47.2 in)
E-TEC
Overall width
XTerrain Series
127 cm(50 in)
850 E-TEC
Overall height
128 cm(50.4 in)
294
VEHICLE
WEIGHT AND DIMENSIONS
XTerrain 600R
99.6 cm(39.2 in)
E-TEC
Ski stance
XTerrain Series
108 cm(42.5 in)
850 E-TEC
(1)
Do not attempt to adjust gap on this spark
NOTICE
plug.
(2)
Refer to INJECTION OIL for detailed information.
(3)
Refer to Track Tension Verification in Maintenance
Procedures for detailed procedure.
295
VEHICLE
This page is intention-
ally blank
296
TROUBLESHOOT-
ING
297
TROUBLESHOOTING GUIDELINES – E-TEC
ENGINES
ELECTRIC STARTER DOES NOT WORK
1. Emergency engine stop switch in OFF position or tether
cord cap not installed on engine cut-off switch.
- Place the emergency engine stop switch in the ON position
and install tether cord cap (on engine cut-off switch.
2. Throttle applied while attempting an engine start.
- Release throttle while cranking.
ENGINE IS CRANKING BUT FAILS TO START
1. No fuel to the engine.
- Check fuel tank level, add fuel if necessary.
2. System voltage too low.
- Contact an authorized BRP snowmobile dealer.
ENGINE RPM DOES NOT REACH CLUTCH ENGAGEMENT
POINT
1. D.E.S.S. did not read D.E.S.S. key code in the tether cord
cap. D.E.S.S. pilot lamp blinks (slow short beeps/
repetitive).
- Properly install tether cord cap.
2. D.E.S.S. has read a different code than the one
programmed. D.E.S.S. pilot lamp blinks rapidly (fast short
beeps/repetitive).
- Install a tether cord cap for which this snowmobile was
programmed.
3. ECM does not recognize the D.E.S.S. key.
- Refer to an authorized BRP snowmobile dealer.
298
TROUBLESHOOTING GUIDELINES - E-TEC ENGINES
ENGINE LACKS ACCELERATION OR POWER
1.
Engine warm-up in progress.
- Drive vehicle at low speeds for a few minutes.
2.
Engine break-in period not completed.
- Complete break-in period.
3.
Drive and driven pulleys require servicing.
- Contact an authorized BRP snowmobile dealer.
4.
Engine overheats.
- Check coolant level, see Maintenance procedures.
- Check heat exchangers cleanliness. Clean if necessary.
5.
Drive belt worn too thin.
- If the drive belt has lost more than 3 mm (1/8 in) of its
original width, it will affect vehicle performance.
- Replace drive belt.
6.
Incorrect track adjustment.
- See MAINTENANCE and/or an authorized Lynx dealer for
proper alignment and tension adjustments.
7.
R.A.V.E. valves problem.
- Seek service from an authorized BRP snowmobile dealer,
repair shop, or person of your own choosing for
maintenance, repair, or replacement.
8.
Fuel pressure too low.
- Seek service from an authorized BRP snowmobile dealer,
repair shop, or person of your own choosing for
maintenance, repair, or replacement.
299
TROUBLESHOOTING GUIDELINES - E-TEC ENGINES
ENGINE BACKFIRES
1. Engine is running too hot.
- See item 4 of ENGINE LACKS POWER.
2. Ignition timing is incorrect or there is an ignition system
failure.
- Seek service from an authorized BRP snowmobile dealer,
repair shop, or person of your own choosing for
maintenance, repair, or replacement.
3. Exhaust system leak.
- Seek service from an authorized BRP snowmobile dealer,
repair shop, or person of your own choosing for
maintenance, repair, or replacement.
4. Fuel pressure too low.
- Seek service from an authorized BRP snowmobile dealer,
repair shop, or person of your own choosing for
maintenance, repair, or replacement.
ENGINE MISFIRES
1. Water in fuel.
- Drain fuel system and refill with fresh fuel.
2. RAVE valves malfunction.
- Have RAVE valves system inspected. Seek service from an
authorized BRP snowmobile dealer, repair shop, or person
of your own choosing for maintenance, repair, or
replacement.
HEATED GRIPS/THUMB WARMERS ARE NOT WORKING
1. Engine RPM is too low.
- Make sure engine RPM is above 2000.
ENGINE HAS SHUT DOWN
1. The engine shuts down after long periods of idling.
- Do not let engine idle too long. Refer to Vehicle warm-up in
operating instruction.
300
MONITORING SYSTEM
Piilot Lamps, Messages and Beeper Codes
Gauge pilot lamp(s) will inform you if an anomaly occurs or to inform
you of a particular condition.
PILOT LAMPS – 4.5” AND 7.2” DIGITAL DISPLAY
DIGITAL PILOT LAMP
–
10.25” COLOR DIGITAL
TOUCHSCREEN
PILOT LAMPS – 10.25” COLOR DIGITAL TOUCHSCREEN
Pilot lamp can flash alone or in combination with another lamp.
The lower display is used as a complement of the pilot lamps to give
you a brief description if an anomaly occurs or to inform you of a par-
ticular condition.
4.5" DIGITAL LOWER DISPLAY
301
MONITORING SYSTEM
7.2" DIGITAL LOWER DISPLAY
10.25” COLOR DIGITAL TOUCHSCREEN
Some messages will be displayed with a beep code and pilot lamp(s).
Beeper codes will be heard and messages will be displayed to catch
your attention.
See table below for details.
NOTE:
Some of the listed pilot lamps and messages do not apply to all
models.
302
MONITORING SYSTEM
Pilot
Message
lamp
Beeper
Description
display
ON
Engine is overheating,
reduce snowmobile
speed and run in loose
snow or stop engine
immediately and let
engine cool down.
HIGH
Check coolant level,
ENGINE
refer to Maintenance. If
TEMPERA
coolant level is correct
TURE
and overheating
persists, contact an
1 Long
authorized BRP
beep
snowmobile dealer. Do
repeat
not run the engine if
ing
condition persists.
Reduce speed or stop
engine. Let engine cool
down and restart. If
overheating persists,
MUFFLER
contact an authorized
OVERHEAT
BRP snowmobile
dealer. Do not run the
engine if condition
persists.
Critical overheat. Stop
engine immediately and
let engine cool down.
Check coolant level,
1 Long
HIGH
refer to Maintenance. If
beep
ENGINE
coolant level is correct
repeat
TEMPERA
and overheating
ing
TURE
persists, contact an
authorized BRP
snowmobile dealer. Do
not run the engine if
condition persists.
303
MONITORING SYSTEM
Pilot
Message
lamp
Beeper
Description
display
ON
MUFFLER
Critical overheat. Stop
OVERHEAT
engine immediately and
let engine cool down. If
overheating persists,
contact an authorized
ECM
BRP snowmobile
OVERHEAT
dealer. Do not run the
engine if condition
persists.
Indicate a low or high
battery voltage
—
condition. See an
BATT VOLT
authorized BRP
snowmobile dealer as
soon as possible.
Engine fault, see an
1 Long
authorized BRP
beep
CHECK
snowmobile dealer,
repeat
ENGINE
repair shop or person of
ing
your own choosing as
soon as possible.
Displayed when brake is
applied for more than 15
seconds while throttle
—
—
lever is squeezed and
vehicle is moving at
more than 5 km/h (3
MPH).
Engine detonation
(RPM is limited when
4 short
this condition occurs).
beeps
—
KNOCK
- Ensure
every 5
recommended fuel is
minutes
used.
- Check fuel quality,
replace if
304
MONITORING SYSTEM
Pilot
Message
lamp
Beeper
Description
display
ON
necessary.
- If fault still occurs,
contact an
authorized BRP
snowmobile dealer,
repair shop, or
person of your own
choosing.
4 short
Engine RPM limited for
beeps
—
REV LIMIT
protection when certain
every 5
faults occur.
minutes
Indicates that maximum
—
—
OVER REV
engine RPM is reached.
Check clutch calibration.
Short
Shutdown procedure in
beeps
force due to engine
—
repeat
SHUTDOWN
overheating or fuel
ing
pump problem.
rapidly
305
MONITORING SYSTEM
Pilot
Message
lamp
Beeper
Description
display
ON
Good key, vehicle ready
—
—
to operate.
Unable to read key (bad
connection). Make sure
—
WRONG KEY
the key is clean and
correctly snapped on
DESS
post.
Invalid key or key not
programmed. Use the
—
CHECK KEY
proper key for the
vehicle or have the
programmed.
Fuel
level
sensor
—
—
problem.
(blink
ing)
Fault Codes
The fault codes can be displayed on the center display.
The fault codes are accessible in the setting menu.
Contact an authorized BRP snowmobile dealer for code signification.
306
WARRANTY
307
BRP INTERNATIONAL LIMITED WARRANTY:
2024 LYNX® SNOWMOBILES
SCOPE OF THE LIMITED WARRANTY
Bombardier Recreational Products Inc. (“BRP”) warrants its 2024
LYNX snowmobiles sold by distributors or dealers authorized by BRP
to distribute LYNX snowmobiles ("LYNX Distributor / Dealer") outside
of the fifty United States, Canada, members of the European Econom-
ic Area (which is comprised of the member states of the European
Union plus United Kingdom, Norway, Iceland and Liechtenstein)
(“EEA”), members states of the Commonwealth of the Independent
States (including Ukraine and Turkmenistan) (''CIS'') and Turkey, from
defects in material or workmanship for the period and under the condi-
tions described below.
Non-factory installed parts and accessories are not covered under this
limited warranty. Please refer to the applicable parts and accessories
limited warranty text.
This limited warranty will become null and void if: (1) the snowmobile
was used for racing or any other competitive activity, at any point,
even by a previous owner; or (2) the snowmobile has been altered or
modified in such a way so as to adversely affect its operation, perform-
ance or durability, or has been altered or modified to change its in-
tended use.
LIMITATIONS OF LIABILITY
TO THE EXTEND PERMITTED BY LAW, THIS WARRANTY IS
EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, IN-
CLUDING WITHOUT LIMITATION ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE
IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE
LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CON-
SEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE
UNDER THIS WARRANTY. SOME STATES/PROVINCES DO
NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND EX-
CLUSIONS IDENTIFIED ABOVE. AS A RESULT, THEY MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM COUNTRY TO COUNTRY. BRP
SHALL NOT BE HELD LIABLE IF PRODUCTS OR WARRANTY
PARTS ARE NOT AVAILABLE IN CERTAIN COUNTRIES FOR
REASONS OUTSIDE OF BRP’S CONTROL.
For Products purchased in Australia, refer to the Australia-specific
section below.
Neither the distributor, any BRP Distributor/Dealer nor any other per-
son has been authorized to make any affirmation, representation or
308
BRP INTERNATIONAL LIMITED WARRANTY: 2024 LYNX® SNOWMOBILES
warranty regarding the product, other than those contained in this lim-
ited warranty, and if made, shall not be enforceable against BRP.
BRP reserves the right to modify this limited warranty at any time,
being understood that such modification will not alter the warranty con-
ditions applicable to the Products sold while this warranty is in effect.
EXCLUSIONS – ARE NOT WARRANTED
The following are not warranted under this limited warranty under any
circumstances:
-
Normal wear and tear;
–
Routine maintenance items, tune ups, adjustments;
–
Damage caused by negligence or failure to provide proper mainte-
nance and/or storage, as described in the operator's guide;
-
Damage resulting from removal of parts, improper repairs, service,
maintenance, modifications or use of parts or accessories not
manufactured or approved by BRP which in its reasonable judge-
ment are either incompatible with the product or adversely affect
its operation, performance and durability, or resulting from repairs
done by a person that is not an authorized servicing BRP snowmo-
bile distributor/ dealer;
-
Damage caused by abuse, abnormal use, neglect, racing or opera-
tion of the product on surfaces other than snow, or operation of the
product in a manner inconsistent with the recommended operation
described in the Operator’s Guide;
-
Damage resulting from accident, submersion, fire, snow or water
ingestion, theft, vandalism or any act of God;
-
Operation with fuels, oils or lubricants which are not suitable for
use with the product (see the Operator’s Guide);
-
Damage resulting from rust, corrosion or exposure to the
elements;
-
Incidental or consequential damages, or damages of any kind in-
cluding without limitation towing, storage, transportation expenses,
telephone, rental, taxi, inconvenience, insurance coverage, loan
payments, loss of time, loss of income; or time missed for down-
time experience due to service work.
-
And damage resulting from studs installed on tracks if the installa-
tion does not conform to BRP’s instructions.
WARRANTY COVERAGE PERIOD
This limited warranty will be in effect from (1) the date of delivery to
the first retail consumer, or (2) the date the product is first put into use,
whichever occurs first and for the applicable period below:
1. TWELVE (12) consecutive months, for private use or commercial
use owners. However, the warranty coverage period on a
309
BRP INTERNATIONAL LIMITED WARRANTY: 2024 LYNX® SNOWMOBILES
snowmobile delivered between June 1st and December 1st of a giv-
en year will expire November 30th of the following year.
The repair or replacement of parts or the performance of service under
this warranty does not extend the life of this warranty beyond its origi-
nal expiration date.
The warranty coverage period identified above are a minimal limited
warranty period which can be extended by any applicable warranty
promotional program, as the case may be.
Note that the duration and any other modalities of the warranty cover-
age are subject to the applicable national or local legislation in the cus-
tomer's country.
FOR PRODUCTS SOLD IN AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably fore-
seeable loss or damage. You are also entitled to have the goods re-
paired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Nothing in these Warranty terms and conditions should be taken to ex-
clude, restrict or modify the application of any condition, warranty,
guarantee, right or remedy conferred or implied under the Competition
and Consumer Act 2010 (Cth), including the Australian Consumer
Law or any other law, where to do so would contravene that law, or
cause any part of these terms and conditions to be void. The benefits
given to you under this limited warranty are in addition to other rights
and remedies that you have under Australian law.
CONDITIONS TO HAVE WARRANTY COVERAGE
This warranty coverage is available only if each of the following condi-
tions has been fulfilled:
1. The Product must be purchased as new and unused by its first
owner from a Distributor/Dealer authorized to distribute Products in
the country in which the sale occurred (“Distributor/Dealer”);
2. The BRP specified pre-delivery inspection process must be com-
pleted, documented and signed by the purchaser;
3. The Product must have undergone proper registration by an au-
thorized Distributor/Dealer;
4. The Product must be purchased in the country in which the pur-
chaser resides;
5. Routine maintenance outlined in the Operator’s Guide must be
timely performed in order to maintain warranty coverage. BRP re-
serves the right to make warranty coverage contingent upon proof
of proper maintenance.
310
BRP INTERNATIONAL LIMITED WARRANTY: 2024 LYNX® SNOWMOBILES
BRP will not honor this limited warranty to any private use owner or
commercial use owner if one of the preceding conditions has not been
met. Such limitations are necessary in order to allow BRP to preserve
both the safety of its products, and also that of its consumers and the
general public.
WHAT TO DO TO OBTAIN WARRANTY
COVERAGE
The customer must cease using the Product upon the appearance of
an anomaly, notify a servicing BRP Distributor/Dealer within two (2)
months of the appearance of the anomaly and provide the Distributor/
Dealer with reasonable access to the Product and reasonable oppor-
tunity to repair it.
The notification period is subject to the applicable national or local
legislation in customer's country.
The customer must also present to the Distributor/Dealer, proof of pur-
chase of the Product and must sign the repair/work order prior to start-
ing the repair in order to validate the warranty repair.
All parts replaced under this limited warranty become the property of
BRP.
WHAT BRP WILL DO
To the extent permitted by law, BRP’s obligations under this warranty
are limited to, at its sole discretion, repairing or replacing parts found
defective under normal use, maintenance and service without charge
for parts and labor, at any authorized BRP Distributor/Dealer during
the warranty coverage period under the conditions described herein.
No claim of breach of warranty shall be cause for cancellation or re-
scission of the sale of the Product to the owner. You may have other
legal rights which may vary from country to country.
In the event that service is required outside of the country of original
sale, the owner will bear responsibility for any additional charges due
to local practices and conditions, such as, but not limited to, freight, in-
surance, taxes, license fees, import duties, and any and all other finan-
cial charges, including those levied by governments, states, territories
and their respective agencies.
BRP reserves the right to improve or modify products from time to time
without assuming any obligation to modify products previously
manufactured.
311
BRP INTERNATIONAL LIMITED WARRANTY: 2024 LYNX® SNOWMOBILES
TRANSFER
If the ownership of a product is transferred during the warranty cover-
age period, this limited warranty, subject to its terms and conditions,
shall also be transferred and be valid for the remaining coverage peri-
od provided BRP or an authorized LYNX Distributor / Dealer receives
a proof that the former owner agreed to the transfer of ownership, in
addition to the coordinates of the new owner.
CONSUMER ASSISTANCE
In the event of a controversy or a dispute in connection with this limited
warranty, BRP suggests that you try to resolve the issue at the LYNX
Distributor / Dealer level. We recommend discussing the issue with
the authorized LYNX Distributor / Dealer's service manager or owner.
If the matter still remains unresolved, contact BRP by filling out the
customer contact form at www.brp.com or contact BRP by mail at one
of the addresses listed under the CONTACT US section of this guide.
312
BRP LIMITED WARRANTY FOR THE
EUROPEAN ECONOMIC AND THE
COMMONWEALTH OF THE INDEPENDENT
STATES (CIS) AREAS AND TURKEY: 2024
LYNX® SNOWMOBILES
SCOPE OF THE LIMITED WARRANTY
Bombardier Recreational Products Inc. ("BRP") warrants its 2024
LYNX® snowmobiles (“Product(s)”) sold by distributors or dealers au-
thorized by BRP to distribute the Products in member states of the
European Economic Area (which is comprised of the states of the
European Union plus the United Kingdom, Norway, Iceland and Liech-
tenstein) ("EEA"), Turkey, member states of the Commonwealth of the
Independent States (including Ukraine and Turkmenistan)
("CIS")
(“Distributor/Dealer”) from defects in material or workmanship for the
period and under the conditions described below.
This limited warranty will become null and void if:
(1) the Product was used for racing or any other competitive activity,
at any point, even by a previous owner; or
(2) the Product has been altered or modified in such a way so as to ad-
versely affect its operation, performance or durability, or has been al-
tered or modified to change its intended use.
Non-factory installed parts and accessories are not covered under this
limited warranty. Please refer to the applicable parts and accessories
limited warranty text.
LIMITATIONS OF LIABILITY
TO THE EXTEND PERMITTED BY LAW, THIS WARRANTY IS EX-
PRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL OTH-
ER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT
THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRAN-
TIES ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS
WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES
ARE EXCLUDED FROM COVERAGE UNDER THIS WARRANTY.
SOME STATES/PROVINCES DO NOT ALLOW FOR THE DIS-
CLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE.
AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTH-
ER LEGAL RIGHTS WHICH MAY VARY FROM STATE TO STATE,
OR PROVINCE TO PROVINCE. BRP SHALL NOT BE HELD LIABLE
IF PRODUCTS OR WARRANTY PARTS ARE NOT AVAILABLE IN
CERTAIN COUNTRIES FOR REASONS OUTSIDE OF BRP’S
CONTROL.
313
For Products purchased in France, refer to the France-specific section
below.
Neither the distributor, any BRP Distributor/Dealer nor any other per-
son has been authorized to make any affirmation, representation or
warranty regarding the product, other than those contained in this lim-
ited warranty, and if made, shall not be enforceable against BRP.
BRP reserves the right to modify this limited warranty at any time,
being understood that such modification will not alter the warranty con-
ditions applicable to the Products sold while this warranty is in effect.
EXCLUSIONS – ARE NOT WARRANTED
The following are not warranted under this limited warranty under any
circumstances:
-
Normal wear and tear;
–
Routine maintenance items, tune ups, adjustments;
–
Damage caused by negligence or failure to provide proper mainte-
nance and/or storage, as described in the operator's guide;
-
Damage resulting from removal of parts, improper repairs, service,
maintenance, modifications or use of parts or accessories not
manufactured or approved by BRP which in its reasonable judge-
ment are either incompatible with the product or adversely affect
its operation, performance and durability, or resulting from repairs
done by a person that is not an authorized servicing BRP snowmo-
bile distributor/ dealer;
-
Damage caused by abuse, abnormal use, neglect, racing or opera-
tion of the product on surfaces other than snow, or operation of the
product in a manner inconsistent with the recommended operation
described in the Operator’s Guide;
-
Damage resulting from accident, submersion, fire, snow or water
ingestion, theft, vandalism or any act of God;
-
Operation with fuels, oils or lubricants which are not suitable for
use with the product (see the Operator’s Guide);
-
Damage resulting from rust, corrosion or exposure to the
elements;
-
Incidental or consequential damages, or damages of any kind in-
cluding without limitation towing, storage, transportation expenses,
telephone, rental, taxi, inconvenience, insurance coverage, loan
payments, loss of time, loss of income; or time missed for down-
time experience due to service work.
-
And damage resulting from studs installed on tracks if the installa-
tion does not conform to BRP’s instructions.
314
WARRANTY COVERAGE PERIOD
This limited warranty will be in effect from (1) the date of delivery to
the first retail consumer, or (2) the date the product is first put into use,
whichever occurs first and for the applicable period below:
1. TWENTY-FOUR (24) consecutive months, for private use owners.
2. TWELVE (12) consecutive months, for commercial use owners.
However, the warranty coverage period on a snowmobile delivered
between June 1st and December 1st of a given year will expire Novem-
ber 30th of the applicable year. A Product is used commercially when it
is used in connection with any work or employment that generates in-
come during any part of the warranty period. A Product is also used
commercially when, at any point during the warranty period, it is li-
censed for commercial use.
The repair or replacement of parts or the performance of service under
this warranty does not extend the life of this warranty beyond its origi-
nal expiration date.
The warranty coverage period identified above are a minimal limited
warranty period which can be extended by any applicable warranty
promotional program, as the case may be.
Note that the duration and any other modalities of the warranty cover-
age are subject to the applicable national or local legislation in the cus-
tomer's country.
FOR PRODUCTS SOLD IN FRANCE ONLY
The seller shall deliver goods that are complying with the contract and
shall be responsible for defects existing upon delivery. The seller shall
also be responsible for defects resulting from packaging, assembling
instructions or the installation when it is its responsibility per the con-
tract or if accomplished under its responsibility. To be compliant with
the contract, the good shall:
1. Be fit for normal use for goods similar thereto and, if applicable:
Correspond to the description provided by the seller and have the
qualities presented to the buyer though sample or model;
Have the qualities that a buyer may legitimately expect considering
the public declarations of the seller, the manufacturer of its repre-
sentative, including in advertising or labeling; or
2. Have the characteristics mutually agreed upon as between the par-
ties or be fit for the specific use intended by the buyer and brought
to the attention of the seller and which accepted.
The action for failure to comply is prescribed after two years after de-
livery of the goods. The seller is responsible for the warranty for hid-
den defects of the good sold if such hidden defects are rendering the
315
good unfit for the intended use, or if they diminish its use in such a
way that the buyer would not have acquired the good or would have
given a lesser price, had he known. The action for such hidden defects
shall be taken by the buyer within 2 years of the discovery of the
defect.
CONDITIONS TO HAVE WARRANTY COVERAGE
This warranty coverage is available only if each of the following condi-
tions has been fulfilled:
- The 2024 LYNX snowmobile must be purchased as new and un-
used by its first owner from a LYNX Distributor / Dealer authorized
to distribute LYNX products in the country in which the sale oc-
curred or in the case of EEA, Union of countries;
- The BRP specified pre-delivery inspection process must be com-
pleted and documented;
- The product must have undergone proper registration by an au-
thorized LYNX Distributor / Dealer;
- The 2024 LYNX snowmobile must be purchased in the country (or
in the case of the EEA, union of countries) in which the purchaser
resides; and
- Routine maintenance outlined in the operator’s guide must be
timely performed in order to maintain warranty coverage. BRP re-
serves the right to make warranty coverage contingent upon proof
of proper maintenance.
BRP will not honour this limited warranty to any private use owner or
commercial use owner if one of the preceding conditions has not been
met. Such limitations are necessary in order to allow BRP to preserve
both the safety of its products, and also that of its consumers and the
general public.
WHAT TO DO TO OBTAIN WARRANTY
COVERAGE
The customer must cease using the snowmobile upon the appearance
of an anomaly. The customer must notify a servicing LYNX Distributor
/ Dealer within two (2) months of the appearance of a defect, and pro-
vide it with reasonable access to the product and reasonable opportu-
nity to repair it. The customer must also present to the authorized
LYNX Distributor / Dealer, proof of purchase of the product and must
sign the repair / work order prior to starting the repair in order to vali-
date the warranty repair. All parts replaced under this limited warranty
become the property of BRP.
Note that the notification period is subject to the applicable national or
local legislation in customer's country.
316
WHAT BRP WILL DO
To the extent permitted by law, BRP’s obligations under this warranty
are limited to, at its sole discretion, repairing parts found defective
under normal use, maintenance and service, or replacing such parts
without charge for parts and labour, at any authorized LYNX Distribu-
tor / Dealer during the warranty coverage period under the conditions
described herein. BRP’s responsibility is limited to making the required
repairs or replacements of parts. No claim of breach of warranty shall
be cause for cancellation or rescission of the sale of the snowmobile
to the owner. You may have other legal rights which may vary from
country to country.
In the event that service is required outside of the country of original
sale, or for EEA residents, if service is required outside of the EEA,
the owner will bear responsibility for any additional charges due to lo-
cal practices and conditions, such as, but not limited to, freight, insur-
ance, taxes, license fees, import duties, and any and all other financial
charges, including those levied by governments, states, territories and
their respective agencies.
BRP reserves the right to improve or modify products from time to time
without assuming any obligation to modify products previously
manufactured.
TRANSFER
If the ownership of a product is transferred during the warranty cover-
age period, this limited warranty, subject to its terms and conditions,
shall also be transferred and be valid for the remaining coverage peri-
od provided BRP or an authorized LYNX Distributor / Dealer receives
a proof that the former owner agreed to the transfer of ownership, in
addition to the coordinates of the new owner.
CONSUMER ASSISTANCE
In the event of a controversy or a dispute in connection with this limited
warranty, BRP suggests that you try to resolve the issue at the LYNX
Distributor / Dealer level. We recommend discussing the issue with
the authorized LYNX Distributor / Dealer's service manager or owner.
If the matter still remains unresolved, contact BRP by filling out the
customer contact form at www.brp.com or contact BRP by mail at one
of the addresses listed under the CONTACT US section of this guide.
317
ADDITIONAL TERMS AND CONDITIONS FOR FRANCE ONLY
The following terms and conditions are applicable to products sold in
France only:
The seller shall deliver goods that are complying with the contract and
shall be responsible for defects existing upon delivery. The seller shall
also be responsible for defects resulting from packaging, assembling
instructions or the installation when it is its responsibility per the con-
tract or if accomplished under its responsibility. To be compliant with
the contract, the good shall:
1. Be fit for normal use for goods similar thereto and, if applicable:
- Correspond to the description provided by the seller and have
the qualities presented to the buyer though sample or model;
- Have the qualities that a buyer may legitimately expect consid-
ering the public declarations of the seller, the manufacturer of
its representative, including in advertising or labeling; or
2. Have the characteristics mutually agreed upon as between the par-
ties or be fit for the specific use intended by the buyer and brought
to the attention of the seller and which accepted.
The action for failure to comply is prescribed after two years after de-
livery of the goods. The seller is responsible for the warranty for hid-
den defects of the good sold if such hidden defects are rendering the
good unfit for the intended use, or if they diminish its use in such a
way that the buyer would not have acquired the good or would have
given a lesser price, had he known. The action for such hidden defects
shall be taken by the buyer within 2 years of the discovery of the
defect.
318
BRP LIMITED WARRANTY USA AND
CANADA: 2024 LYNX® SNOWMOBILES
SCOPE OF THE LIMITED WARRANTY
Bombardier Recreational Products Inc. ("BRP") warrants its 2024
LYNX® snowmobiles (“Product (s)”) sold by authorized BRP Dealers
(as hereinafter defined) in the United States of America ("USA") and in
Canada from defects in material or workmanship for the period and
under the conditions described below.
This limited warranty will become null and void if:
(1) the Product was used for racing or any other competitive activity,
at any point, even by a previous owner; or
(2) the Product has been altered or modified in such a way so as to ad-
versely affect its operation, performance or durability, or has been al-
tered or modified to change its intended use.
Non-factory installed parts and accessories are not covered under this
limited warranty. Please refer to the applicable parts and accessories
limited warranty text.
LIMITATIONS OF LIABILITY
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS
EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, IN-
CLUDING WITHOUT LIMITATION ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE
IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE
LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CON-
SEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE
UNDER THIS WARRANTY. SOME STATES/PROVINCES DO
NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND EX-
CLUSIONS IDENTIFIED ABOVE. AS A RESULT, THEY MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE
TO PROVINCE.
Neither the distributor, any BRP dealer nor any other person has been
authorized to make any affirmation, representation or warranty regard-
ing the product, other than those contained in this limited warranty,
and if made, shall not be enforceable against BRP. BRP reserves the
right to modify this limited warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to
the products sold while this warranty is in effect.
319
BRP LIMITED WARRANTY USA AND CANADA: 2024 LYNX® SNOWMOBILES
EXCLUSIONS – ARE NOT WARRANTED
The following are not warranted under any circumstances:
-
Normal wear and tear;
–
Routine maintenance items, tune ups, adjustments;
–
Damage caused by failure to provide proper maintenance and/or
storage, as described in the Operator's Guide;
-
Damage resulting from removal of parts, improper repairs, service,
maintenance, modifications or use of parts or accessories not
manufactured or approved by BRP or resulting from repairs done
by a person that is not an authorized servicing BRP dealer;
-
Damage caused by abuse, abnormal use, neglect, use of the prod-
uct on surfaces other than snow, or operation of the product in a
manner inconsistent with the recommended operation described in
the Operator’s Guide;
-
Damage resulting from accident, submersion, fire, theft, vandalism
or any act of God;
-
Operation with fuels, oils or lubricants which are not suitable for
use with the product (see the Operator’s Guide);
-
Snow or water ingestion;
–
Incidental or consequential damages, or damages of any kind in-
cluding without limitation towing, storage, telephone, rental, taxi, in-
convenience, insurance coverage, loan payments, loss of time,
loss of income; and
-
Damage resulting from studs installed on tracks if the installation
does not conform to BRP’s instructions.
WARRANTY COVERAGE PERIOD
This limited warranty will be in effect from (1) the date of delivery to
the first retail consumer, or (2) the date the product is first put into use,
whichever occurs first and for the applicable period below:
1. TWELVE (12) consecutive months, for private use or commercial
use owners. However, the warranty coverage period on a snowmo-
bile delivered between June 1st and December 1st of a given year
will expire November 30th of the following year
2. For emission-related components, please also refer to the US
EPA Emission-Related Warranty.
The repair or replacement of parts or the performance of service under
this warranty does not extend the life of this limited warranty beyond
its original expiration date.
CONDITIONS TO HAVE WARRANTY COVERAGE
This warranty coverage is available only if each of the following condi-
tions has been fulfilled:
320
BRP LIMITED WARRANTY USA AND CANADA: 2024 LYNX® SNOWMOBILES
1. The Product must be purchased as new and unused by its first
owner from a Dealer authorized to distribute Products in the coun-
try in which the sale occurred (“Dealer”);
2. The BRP specified pre-delivery inspection process must be com-
pleted, documented and signed by the purchaser;
3. The Product must have undergone proper registration by an au-
thorized Dealer;
4. The Product must be purchased in the country in which the pur-
chaser resides;
5. Routine maintenance outlined in the Operator’s Guide must be
timely performed in order to maintain warranty coverage. BRP re-
serves the right to make warranty coverage contingent upon proof
of proper maintenance.
BRP will not honor this limited warranty to any private use owner or
commercial use owner if one of the preceding conditions has not been
met. Such limitations are necessary in order to allow BRP to preserve
both the safety of its products, and also that of its consumers and the
general public.
WHAT TO DO TO OBTAIN WARRANTY
COVERAGE
The customer must cease using the Product upon the appearance of
an anomaly, notify a servicing BRP Dealer within two (2) months of
the appearance of the anomaly and provide the Dealer with reason-
able access to the Product and reasonable opportunity to repair it.
The notification period is subject to the applicable national or local
legislation in customer's country.
The customer must also present to the Dealer, proof of purchase of
the Product and must sign the repair/work order prior to starting the re-
pair in order to validate the warranty repair.
All parts replaced under this limited warranty become the property of
BRP.
WHAT BRP WILL DO
To the extent permitted by law, BRP’s obligations under this warranty
are limited to, at its sole discretion, repairing or replacing parts found
defective under normal use, maintenance and service without charge
for parts and labor, at any authorized BRP Dealer during the warranty
coverage period under the conditions described herein. No claim of
breach of warranty shall be cause for cancellation or rescission of the
sale of the Product to the owner. You may have other legal rights
which may vary from country to country.
321
BRP LIMITED WARRANTY USA AND CANADA: 2024 LYNX® SNOWMOBILES
In the event that service is required outside of the country of original
sale, the owner will bear responsibility for any additional charges due
to local practices and conditions, such as, but not limited to, freight, in-
surance, taxes, license fees, import duties, and any and all other finan-
cial charges, including those levied by governments, states, territories
and their respective agencies.
BRP reserves the right to improve or modify products from time to time
without assuming any obligation to modify products previously
manufactured.
TRANSFER
If the ownership of a product is transferred during the warranty cover-
age period, this limited warranty, subject to its terms and conditions,
shall also be transferred and be valid for the remaining coverage peri-
od provided BRP or an authorized LYNX Dealer receives a proof that
the former owner agreed to the transfer of ownership, in addition to
the coordinates of the new owner.
CONSUMER ASSISTANCE
In the event of a controversy or a dispute in connection with this limited
warranty, BRP suggests that you try to resolve the issue at the dealer-
ship level. We recommend discussing the issue with the authorized
dealer's service manager or owner.
If the matter still remains unresolved, contact BRP by filling out the
customer contact form at www.brp.com or contact BRP by mail at one
of the addresses listed under the CONTACT US section of this guide.
322
US EPA EMISSION-RELATED WARRANTY
Bombardier Recreational Products Inc. (“BRP”) warrants to the ulti-
mate purchaser and each subsequent purchaser that this new engine,
including all parts of its exhaust emission-control system and its evap-
orative emission-control system, meets two conditions:
1. It is designed, built, and equipped so it conforms at the time of sale
to the ultimate purchaser with the requirements of 40 CFR 1051
and 40 CFR 1060.
2. It is free from defects in materials and workmanship that may keep
it from meeting the requirements of 40 CFR 1051 and 40 CFR
1060.
Where a warrantable condition exists, BRP will repair or replace, as it
elects, any part or component with a defect in materials or workman-
ship that would increase the engine’s emissions of any regulated pol-
lutant within the stated warranty period at no cost to the owner,
including expenses related to diagnosing and repairing or replacing
emission-related parts. All defective parts replaced under this warranty
become the property of BRP.
For all emission-related warranty claims, BRP is limiting the diagnosis
and repair of emission-related parts to the authorized LYNX dealers,
unless for emergency repairs as required by item 2 of the following
list.
As a certifying manufacturer, BRP will not deny emission-related war-
ranty claims based on any of the following:
1. Maintenance or other service BRP or BRP's authorized facilities
performed.
2. Engine/equipment repair work that an operator performed to cor-
rect an unsafe, emergency condition attributable to BRP as long as
the operator tries to restore the engine/equipment to its proper con-
figuration as soon as possible.
3. Any action or inaction by the operator unrelated to the warranty
claim.
4. Maintenance that was performed more frequently than BRP
specify.
5. Anything that is BRP fault or responsibility.
6. The use of any fuel that is commonly available where the equip-
ment operates unless BRP written maintenance instructions state
that this fuel would harm the equipment’s emission control system
and operators can readily find the proper fuel. See maintenance in-
formation section and fuel requirements of fueling section.
Emiissiion-Related Warranty Period
The emission-related warranty is valid for the following period which-
ever comes first:
323
US EPA EMISSION-RELATED WARRANTY
Kilo
hours
months
meters
Exhaust emission-related
200
30
4000
components
Evaporative emission-related
N/A
24
N/A
components
Components Covered
The emission-related warranty covers all components whose failure
would increase an engine’s emissions of any regulated pollutant, in-
cluding the following listed components:
1.
For exhaust emissions, emission-related components include any
engine parts related to the following systems:
- Air-induction system
- Fuel system
- Ignition system
- Exhaust gas recirculation systems
2.
The following parts are also considered emission-related compo-
nents for exhaust emissions:
- Aftertreatment devices
- Crankcase ventilation valves
- Sensors
- Electronic control units
3.
The following parts are considered emission-related components
for evaporative emissions:
- Fuel tank
- Fuel cap
- Fuel line
- Fuel line fittings
- Clamps*
- Pressure relief valves*
- Control valves*
- Control solenoids*
- Electronic controls*
- Vacuum control diaphragms*
- Control cables*
- Control linkages*
- Purge valves
- Vapor hoses
- Liquid/vapor separator
- Carbon canister
- Canister mounting brackets
324
US EPA EMISSION-RELATED WARRANTY
- Carburetor purge port connector
NOTE:
*As related to the evaporative emission control system
4. Emission-related components also include any other part whose
only purpose is to reduce emissions or whose failure will increase
emissions without significantly degrading engine/equipment
performance.
Limiited Applicabiiliity
As a certifying manufacturer, BRP may deny emission-related war-
ranty claims for failures that have been caused by the owner’s or oper-
ator’s improper maintenance or use, by accidents for which the
manufacturer has no responsibility, or by acts of God. For example, an
emission-related warranty claim need not be honored for failures that
have been directly caused by the operator’s abuse of the engine/
equipment or the operator’s use of the engine/equipment in a manner
for which it was not designed and are not attributable to the manufac-
turer in anyway.
If you have any question regarding your warranty rights and responsi-
bility or for the name and location of the nearest authorized BRP deal-
er, you should contact BRP by filling out the customer contact form at
www.brp.com or contact BRP by mail at one of the addresses listed
under the CONTACT US section of this guide, or call at
1-888-272-9222.
325
US EPA EMISSION-RELATED WARRANTY
This page is intention-
ally blank
326
CUSTOMER
INFORMATION
327
DATA PRIVACY INFORMATION
Bombardier Recreational Products inc., its affiliates and subsidiaries
(“BRP”) is committed to protecting your privacy and support a general
policy of openness about how we collect, use and disclose your per-
sonal information in the course of managing our relationship with you.
More details can be found by visiting BRP’s Privacy Policy at:
https://brp. com/en/privacy-policy. html or by scanning the QR
Code below.
Please be assured that we have appropriate security measures in
place to ensure that your personal information is protected against
loss and unauthorized access.
Your personal information that may be collected by BRP, directly from
you or from authorized dealers or authorized third parties, includes:
- Contact, Demographic & Registration Information (e.g., name,
full address, phone number, email, gender, ownership history, lan-
guage of communication)
- Vehicle Information (e.g., serial number, purchase and delivery
date, unit usage, vehicle location and movements)
- Third Party Information (e.g., information received from BRP
partners, joint-marketing activities information, social media)
- Technological Information (e.g., IP address, type of device, op-
erating system, browser type, webpages you view, cookies and
similar technologies when you use BRP or dealers’ websites or
mobile application)
- Interaction with BRP Information (e.g., information collected
when you call BRP’s in-house sales representatives, buy items on
a BRP web Site, sign up for BRP emails, participate in BRP-spon-
sored contests and sweepstakes or attend BRP-sponsored
events)
- Transactional Information (e.g., information necessary to handle
returns, payment information when you purchase our products or
services through our websites or mobile applications and other is-
sues related to your purchase of BRP products)
This information may be used and processed for the following
purposes:
- Safety & Security
- Customer Support for Sales & After Sales (e.g., complete or follow
up with you about your purchase or maintenance)
- Registration & Warranty
- Communication (e.g., sending you a BRP satisfaction survey)
- Online Behavioural Advertising, Profiling and Location-Based
Services
(e.g., offer customized experience)
- Compliance & Dispute Resolution
- Marketing & Advertising
- Assistance (e.g., help with any delivery issues, handle returns, and
other issues related to your purchase of BRP products).
328
DATA PRIVACY INFORMATION
We also may use personal information to generate aggregated or stat-
istical data that no longer identifies you personally.
Your personal information may be disclosed to the following:
BRP, BRP’s authorized dealerships, distributors, service pro-
viders, advertising & market research partners and other author-
ized third parties.
We may receive information about you from diverse sources, including
third parties, such as BRP’s authorized dealerships and partners, with
whom we offer services or engage in joint-marketing activities. We
may also receive information about you from social media platforms
such as Facebook and Twitter, when you interact with us on those
platforms.
Depending on the circumstances, your personal information may be
communicated outside the region where you reside. Your personal in-
formation is retained only for as long as necessary for the purpose for
which we obtained it and according to our retention policies.
To exercise your data privacy rights (e.g. right of access, right of recti-
fication), to withdraw your consent in order to be removed from the ad-
dress list for marketing purposes or for the satisfaction survey or for
general data privacy questions, please contact BRP’s Data Protection
Officer at or by mail at privacyofficer@brp.com or by mail at:
BRP Legal Service, 726 St-Joseph, Valcourt, Quebec, Canada, J0E
2L0.
When BRP processes your personal information, they do so in
compliance with its Privacy Policy available at: https://www.brp.
com/en/privacy-policy.html or by using the following
QR Code.
329
CONTACT US
Asiia Paciific
Australia
Level 26
477 Pitt Street
Sydney, NSW 2020
China
上海市徐汇区衡山路10号6号楼301
Rm 301, Building 6,
No.10 Heng Shan Rd,
Shanghai, China
Japan
21F Shinagawa East One Tower
2-16-1 Konan, Minato-ku-ku,
Tokyo 108-0075
New Zealand
Suite 1.6, 2-8 Osborne Street,
Newmarket, Auckland 2013
Europe, Middle East and Afriica
Belgium
Oktrooiplein 1
9000 Gent
Czech Republic
Stefanikova 43a
Prague 5
150 00
Germany
Itterpark 11
40724 Hilden
Finland
Isoaavantie 7
PL 8040
96101 Rovaniemi
France
Arteparc Bâtiment B
Route de la côte d'Azur,
13590 Meyreuil
330
CONTACT US
Norway
Ingvald Ystgaardsvei 15
N-7484 Trondheim
Salg, marketing, ettermarked
Sweden
Spinnvägen 15
903 61 Umeå
Sweden 90821
Switzerland
Avenue d’Ouchy 4-6
1006 Lausanne
Latiin America
Brazil
Av. James Clerck Maxwell, 230
Campinas, Sao Paulo
CEP 13069-380
Mexico
Av. Ferrocarril 202
Parque Industrial Querétaro
Santo Rosa Jauregui, Querétaro
C.P. 76220
North Ameriica
Canada
3200A, rue King Ouest,
Suite 300
Sherbrooke (Québec) J1L 1C9
United States of America
10101 Science Drive
Sturtevant, Wisconsin
53177
331
CHANGE OF ADDRESS/OWNERSHIP
If your address has changed or if you are the new owner of the snow-
mobile, be sure to notify BRP by either:
- Notifying an authorized BRP snowmobile dealer or distributor.
- North America Only: calling at 1 888 272-9222.
- Mailing one of the change of address cards on the following pages
at one of the BRP addresses indicated in the Contact Us section of
this guide.
In case of change of ownership, please join a proof that the former
owner agreed to the transfer.
Notifying BRP, even after the expiration of the limited warranty, is very
important as it enables BRP to reach the snowmobile owner if neces-
sary, like when safety recalls are initiated. It is the owner’s responsibil-
ity to notify BRP.
STOLEN UNITS: If your personal snowmobile is stolen, you should
notify BRP or an authorized BRP snowmobile dealer. We will ask you
to provide your name, address, phone number, the vehicle identifica-
tion number and the date it was stolen.
332
|