Standard Specifications for Road, Bridge, and Municipal Construction 2020 (M 41-10)

Standard Specifications for Road, Bridge, and Municipal Construction 2020 (M 41-10) - page 7

Page 6-196

including paint containing lead and other hazardous materials, with reapplication of
a three-component moisture-cured polyurethane paint system. The documentation
shall include the name and size of the project, the dates of the work, the owner’s
name, and name and contact information for an owner’s contact person.

2. The Contractor’s quality control inspector(s) for the project shall be NACE-certified

CIP Level 3 or SSPC Protective Coating Inspector (PCI) Level 3.

6-07.3(2) Submittals

The Contractor shall submit a painting plan consisting of one comprehensive submittal
including all components described in this Section. The Contractor shall submit Type 2
Working Drawings of the painting plan components. Each component of the plan shall
identify the specification section it represents.

For shop application of paint, the painting plan shall include the documents and samples
listed in Sections

6-07.3(2)B

, 6-07.3(2)C, and

6-07.3(2)E

For field application of paint, the painting plan shall include the documents and samples
listed in

Section 6-07.3(2)A

through

6-07.3(2)F

6-07.3(2)A

Work Force Qualifications Submittal Component

The work force qualifications submittal component of the painting plan shall include the
following:
1. Documentation of the Contractor’s workforce qualifications as specified in

Section 6-07.3(1)

2. Resumé of qualifications and contact information for the Contractor’s on-site

supervisors. Each on-site supervisor shall have 3 years’ minimum of industrial
painting field experience with 1 year minimum of field supervisory or management
experience in bridge painting projects.

6-07.3(2)B

Contractor’s Quality Control Program Submittal Component

The Contractor’s quality control program submittal component of the painting plan shall
include the following:
1. Description of the inspection procedures, tools, techniques and the acceptance

criteria for all phases of work.

2.  Procedure for implementation of corrective action for non-conformance work.
3.  The paint system manufacturer’s recommended methods of preventing defects.
4.  The Contractor’s frequency of quality control inspection for each phase of work.
5.  Example of each completed form(s) of the daily quality control report used to

document the inspection work and tests performed by the Contractor’s quality
control personnel.

Painting 6-07

6-07.3(2)C

Paint System Manufacturer and Paint System Information

Submittal Component

The paint system manufacturer and paint system information submittal component of the
painting plan shall include the following:
1. Product data sheets and Safety Data Sheets (SDS) on the paint materials, paint

preparation, and paint application, as specified by the paint manufacturer, including:
a.  All application instructions, including the mixing and thinning directions.
b.  Recommended spray nozzles and pressures.
c.  Minimum and maximum drying time between coats.
d.  Restrictions on temperature and humidity.
e.  Repair procedures for shop and field applied coatings.
f.

Maximum dry film thickness for each coat.

g. Minimum wet film thickness for each coat to achieve the specified minimum dry

film thickness.

2. Identification of, and contact information for, the paint system manufacturer’s

technical representative.

3. For painting of new steel, the friction coefficient of the faying surface, including

test results and the paint manufacturer’s Certificate of Compliance in support of the
friction coefficient.

6-07.3(2)D

Hazardous Waste Containment, Collection, Testing, and Disposal

Submittal Component

The hazardous waste containment, collection, testing, and disposal shall meet all Federal
and State requirements, and the submittal component of the painting plan shall include
the following:
1. Abrasive blasting containment system attachment and support in accordance with

Section 6-07.3(10)A

, with a complete description of each attachment device.

2. Details of jobsite material storage facilities and containment waste storage facilities,

including location, security, and environmental control.

3. Methods and materials used to contain, collect, and dispose of all containment waste

and all construction-related waste, including transportation of waste.

4. Details of the containment waste sampling plan conforming to

WAC

173-303

for

waste designated as dangerous waste or extremely hazardous waste.

5. The name of, and contact information for, the accredited analytical laboratory

performing the testing of the containment waste samples in accordance with

Section 6-07.3(10)F

6. Process for tracking the disposal of hazardous waste, including a sample form of the

tracking documentation.

Page 6-198

7. When a wind speed threshold is specified, a description of the method to lower or

withdraw tarps, plastic exterior, and other containment components presenting an
exposed face to wind, and the estimated time required to accomplish this action.

8. Provisions for dust and debris collection, ventilation, and auxiliary lighting within the

containment system.

6-07.3(2)E

Cleaning and Surface Preparation Submittal Component

The cleaning and surface preparation submittal component of the painting plan shall
include the following:
1. Details of the abrasive blast cleaning operation, including:

a. Description of the abrasive blast cleaning procedure.
b. Type, manufacturer, and brand of abrasive blast material and all associated

additives, including Safety Data Sheets (SDS).

c. Description of the abrasive blast cleaning equipment to be used.

6-07.3(2)F

Paint Application Equipment and Operations Submittal

Component

The paint application equipment and operations submittal component of the painting plan
shall include the following:
1. Description of the equipment used for paint application operations.
2. Details of jobsite material storage facilities, including location, security, and

environmental control.

3. Description of the supports and platforms used to support equipment, materials, and

workers, including scaffolds, platforms, accordion lifts, and barges, and the methods
used to attach, moor, and anchor these supports and platforms.

4. Drip tarps in accordance with

Section 6-07.3(10)O

5. Methods and materials used to protect surrounding structures, equipment, and

property from exposure to, and damage from, painting operations.

6. Details of paint application operations for areas of limited and restricted access.
7. Description of the method for the removal of any accidental spills or drips on traffic

that occur during the normal painting operations, and provisions for providing a
vehicle-cleaning station.

6-07.3(2)G

Painting Plan Meeting

At the option of the Contracting Agency, a painting plan meeting may be scheduled
following review of the Contractor’s initial submittal of the plan. The Contractor shall be
represented by the superintendent, on-site supervisors, and quality control inspectors.