Nissan Qashqai (2007-2010). Manual - part 698

 

  Index      Nissan     Nissan Qashqai - service and repair manual 2007 - 2010 year

 

Search            copyright infringement  

 

 

 

 

 

 

 

  

 

Content   ..  696  697  698  699   ..

 

 

Nissan Qashqai (2007-2010). Manual - part 698

 

 

SERVICE DATA AND SPECIFICATIONS (SDS)

BR-91

< SERVICE DATA AND SPECIFICATIONS (SDS) 

[RHD]

C

D

E

G

H

I

J

K

L

M

A

B

BR

N

O

P

Disc rotor

Standard thickness 

9.0 (0.354)

Wear limit thickness

8.0 (0.315)

Thickness variation (measured at 8 positions)

0.020 (0.0008) 

Runout limit (with it attached to the vehicle)

—

PB-2

< ON-VEHICLE MAINTENANCE >

PARKING BRAKE SYSTEM

ON-VEHICLE MAINTENANCE

PARKING BRAKE SYSTEM

Inspection and Adjustment

INFOID:0000000000925852

INSPECTION

Lever Stroke

• Operate the parking brake lever with a force of 196 N (20 kg, 44 lb). Check that the lever stroke is within the

specified number of notches. (Check it by listening to the clicks of the ratchet.)

• When parking brake warning lamp turns ON, check that the lever stroke is within the specified number of

notches. (Check it by listening to the clicks of the ratchet.)

Inspect Components

• Check each component for installation condition such as looseness.
• Check the device assembly for bend, damage and cracks. Replace if necessary.
• Check the cables for wear, damage and cracks. Replace if necessary.
• Check the parking brake switch, and replace it if necessary. Refer to 

BRC-47, "Component Inspection"

 (with

ABS), 

BRC-145, "Component Inspection"

 (with ESP).

ADJUSTMENT

• To perform adjustment operations, remove rear tires.
1.

Fix the disc rotor using wheel nuts.

2.

Remove the switch cover from center console.

3.

Release the parking brake lever by turning the adjusting nut (1)
with a deep socket wrench and loosening the cable.

4.

Remove the adjusting hole plug from the disc rotor. Turn the
adjuster (1) in the direction (A) as shown in the figure using a
suitable tool until the disc rotor is locked. 

5.

Turn back the adjuster 7 notches from the locked position.

6.

Rotate the disc rotor to check that there is no drag. Install the
adjusting hole plug.

7.

Adjust the cable with the following procedure.

a.

Operate the parking brake lever with a force of 294 N (30 kg, 66
lb) for 10 strokes or more. 

b.

Adjust the parking brake lever stroke by turning the adjusting nut
with a deep socket wrench.

CAUTION:

Never reuse the adjusting nut if the nut is removed.

Standard

Number of notches

: Refer to 

PB-10, "Parking Brake Control"

.

Standard

Number of notches

: Refer to 

PB-10, "Parking Brake Control"

.

JPFIB0013ZZ

JPFIB0014ZZ

PARKING BRAKE SYSTEM

PB-3

< ON-VEHICLE MAINTENANCE >

C

D

E

G

H

I

J

K

L

M

A

B

PB

N

O

P

c.

Operate the parking brake lever with a force of 196 N (20 kg, 44 lb). Check that the lever stroke is within
the specified number of notches. (Check it by listening to the clicks of the ratchet.)

d.

Rotate the disc rotor with the parking brake lever released and check that there is no drag.

Standard

Number of notches

: Refer to 

PB-10, "Parking Brake Control"

.

 

 

 

 

 

 

 

Content   ..  696  697  698  699   ..