Content .. 1314 1315 1316 1317 ..
Nissan Qashqai (2007-2010). Manual - part 1316
MIR-10
< COMPONENT DIAGNOSIS >
DOOR MIRROR REMOTE CONTROL SWITCH
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace door mirror remote control switch. Refer to
MIR-41, "Removal and Installation"
OPEN/CLOSE SWITCH
OPEN/CLOSE SWITCH : Description
INFOID:0000000000951524
• Open/close switch is interacted into door mirror control switch.
• Power is supplied to folding motor located inside the door mirror to operate the mirror.
OPEN/CLOSE SWITCH : Component Function Check
INFOID:0000000000951525
1.
CHECK OPEN/CLOSE SWITCH FUNCTION
Check that door mirror can operate by door mirror remote control switch (open/close switch) operation.
Is the inspection result normal?
YES
>> Open / close switch function is OK.
NO
>> Refer to
MIR-10, "OPEN/CLOSE SWITCH : Diagnosis Procedure"
OPEN/CLOSE SWITCH : Diagnosis Procedure
INFOID:0000000000951526
1.
CHECK OPEN / CLOSE SWITCH OUTPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between door mirror remote control switch and ground.
Is the inspection result normal?
YES
>> Open/close switch function is OK.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch ON.
2.
Check voltage between door mirror remote control switch and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror remote control switch connector.
3.
Check continuity between door mirror remote control switch connector and ground.
Is the inspection result normal?
(+)
(-)
Open / close switch condition
Voltage (V)
(Approx.)
Door mirror remote control switch connector
Terminal
M7
8
Ground
CLOSE
Battery voltage
Other than above
0
9
OPEN
Battery voltage
Other than above
0
(+)
(-)
Voltage (V)
(Approx.)
Door mirror remote control switch connector
Terminal
M7
3
Ground
Battery voltage
Door mirror remote control switch connector
Terminal
Ground
Continuity
M7
1
Existed