Lifan 620. Service manual - part 84

(3) Remove the left rear seat back assembly, as shown in Fig. 7-11. 

 

①

 

③

 

①

②

③

 

Fig. 7-13 

 Remove the bottom fixing bolts on the left side b

①

ack of the rear seat.   

 Pull out the 

②

left side back and the Fig. 7-13 may be referred. 

337

(6) Remove the rear seat right side back assembly, bolts and side seat back. 

 Remove the bottom fixing bolts on the rear seat right side back.

①

 

 Pull out the right sid

②

e back. 

(7) Remove the left hinge of the rear seat back, bolts and hinge. 

(8) Remove the right hinge of the rear seat back, bolts and hinge. 

(9) Remove the central hinge of the rear seat back, as shown in Fig. 7-14. 

 

①

②

①

②

 

 

Fig. 7-15 

 

① Hang a pothook on the body firmly (rear side). 

 Put the seat frame carrier on the 

②

two pothooks (front side).   

Note: Confirm the fastness of the seat. 

338

V. Components and maintenance of the rear seat assembly 

1. Structure of the components as shown in Fig. 7-16. 

 

 

 

 

 

 

Fig. 7-17 

 

 Incline

②

 the seat back assembly. 

 Remove the two side bracket f

③

lange bolts connecting to the body at the left and right side. 

Note: Removing the bolts first is acceptable. 

(2) Remove the left side back of the left rear seat. 

339

 Remove the bolts

①

. 

 

② Hold the side back assembly upwardly along the direction of the arrowhead so as to separate 

the armrest pothook with the body, as shown in Fig. 7-18. 

 

①

 

①

 

 

Fig. 7-19 

 Install the hinge 

②

with bolts at the torque of 9.8N·m. 

(3) Installing the right rear seat side back assembly shall conform to the steps of left armrest 

340