Lexus NX450H+ (2024 year). Manual in english

If the button could not be registered, the buzzer sounds continuously for approximately
3 seconds.

Driving position recall procedure

Make sure that the doors are locked before recalling the driving position.
Carry the electronic key that has been registered to the driving position, and
then unlock and open the driver’s door using the smart access system with
push-button start or wireless remote control.

The driving position will move to the recorded position (not including the steering
wheel and head-up display [if equipped]). However, the seat will move to a position
slightly behind the recorded position in order to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the seat and
outside rear view mirrors will not move.

Turn the power switch to ACC or ON, or fasten a seat belt.

The seat, steering wheel and head-up display (if equipped) will move to the recorded
position.

INFORMATION

■

Recalling the driving position using the memory recall function

●

Different driving positions can be registered for each electronic key. Therefore,
the driving position that is recalled may be different depending on the key being
carried.

●

If a door other than the driver’s door is unlocked with the smart access system with
push-button start, the driving position cannot be recalled. In this case, press the
driving position button which has been set.

Memory recall function cancelation procedure

Carry only the key you want to cancel and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.

4-2. Adjusting the preferred driving position

279

Interior feat

Adjusting the temperature/environment inside the vehicle

Comfortable condition to be maintained without adjusting each system
(Lexus Climate Concierge)

Operation of the seat heaters and seat ventilators of the front seats and the heated
steering wheel

is performed automatically according to the temperature setting

of the air conditioning system, outside temperature, temperature inside the vehicle,
etc.

Lexus Climate Concierge

Lexus Climate Concierge operates in conjunction with [AUTO] of the air condi-
tioning system.

Select the option screen switch.

→

P.286

Select the [Climate concierge] switch.

Turn the [AUTO] switch on.

Automatically controllable functions

●

Automatic air conditioning system

→

P.283

Operation of the air conditioning system is performed automatically according to the
temperature setting for the driver's side/front passenger's side.

●

Seat heaters

→

P.294

Operation of the seat heaters is performed automatically according to the temperature
setting for the driver's side/front passenger's side.
Operation will automatically change between the seat heaters and seat ventilators ac-
cording to the temperature setting of the air conditioning system, outside temperature,
etc.

●

Seat ventilators

→

P.296

Operation of the seat ventilators is performed automatically according to the tempera-
ture setting for the driver's side/front passenger's side.
Operation will automatically change between the seat heaters and seat ventilators ac-
cording to the temperature setting of the air conditioning system, outside temperature,
etc.

●

Heated steering wheel

→

P.293

Operation of the heated steering wheel is performed automatically according to the
temperature setting of the air conditioning system, outside temperature, etc.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

281

Interior feat

INFORMATION

■

Passenger detection functions

●

When a passenger is detected in the front passenger seat, the seat heater and
ventilator will operate automatically.

●

When the seat heater/seat ventilator switch is set to AUTO, the passenger detection
function will not operate.

■

Rear seat heater operation (vehicles with rear seat heaters)

The rear seat heaters are not controlled by the Lexus Climate Concierge.

4-3. Adjusting the temperature/environment inside the vehicle

282

Air conditioning controls

When the [AUTO] switch is on, the air outlets and fan speed will automatically be
changed according to the set temperature.

NOTICE

●

Do not leave the air conditioning system on longer than necessary when the hybrid
system is off.

●

When repairing/replacing parts of the air conditioning system, have repair/replace-
ment performed by your Lexus dealer. When a part of the air conditioning system,
such as the evaporator, is to be replaced, it must be replaced with a new one.

INFORMATION

■

Heating

●

In HV mode, the gasoline engine may operate in order to extract heat from the engine
coolant via the heater.

●

In EV mode or Auto EV/HV mode, heating is done by a heat pump system.

•

When the outside temperature is low or it is snowing, compared to conventional
vehicles, heating may be less effective and warm air may not come out.

•

When the outside heat exchanger is frosted over, fan speed declines and it may
become harder to heat the interior. However, it is not a malfunction. In this situation,
the air temperature from the outlets may not change even though the set tempera-
ture is raised.

•

When [AUTO] switch is turned on, the heating is controlled optimally. Therefore,
the set heating performance may not be achieved even if the fan speed setting is
increased.

Outside heat exchanger

●

In the following situations the gasoline engine may operate in order to extract heat-
from the engine coolant via the heater even in EV mode.

•

The outside temperature is approximately -10°C (14°F) or low

•

Windshield defogger switch is operating

4-3. Adjusting the temperature/environment inside the vehicle

283

Interior feat

■

Water droplets during air conditioning operation

The outside heat exchanger, accumulator and air conditioning piping may incur conden-
sation or frost may form.
During or after the air conditioning operation, water droplets may fall from the vehicle.
However, it is not a malfunction.

Accumulator

Outside heat exchanger

■

When the outside temperature exceeds 75°F (24°C) and the air conditioning
system is on

●

In order to reduce the air conditioning power consumption, the air conditioning
system may switch to recirculated air mode automatically. This may also reduce fuel
consumption.

●

Recirculated air mode is selected as a default mode when the power switch is turned
to ON mode.

●

It is possible to switch to outside air mode at any time by select the outside/recirculat-
ed air mode switch.

■

When driving on dusty roads

Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after
closing the windows, it is recommended that the air intake mode be set to outside air
mode and the fan speed to any setting except off.

■

When the outside temperature is low

The dehumidification function may not operate even when [A/C] is selected.

■

Ventilation and air conditioning odors

●

To let fresh air in, set the air conditioning system to the outside air mode.

●

During use, various odors from inside and outside the vehicle may enter into and
accumulate in the air conditioning system. This may then cause odor to be emitted
from the vents.

●

To reduce potential odors from occurring:

•

It is recommended that the air conditioning system be set to outside air mode prior
to turning the vehicle off.

•

The start timing of the blower may be delayed for a short period of time immediate-
ly after the air conditioning system is started in automatic mode.

4-3. Adjusting the temperature/environment inside the vehicle

284

●

When parking, the system automatically switches to outside air mode to encourage-
better air circulation throughout the vehicle, helping to reduce odors that occur when
starting the vehicle.

■

Air conditioning system refrigerant

●

A label regarding the refrigerant of the air condi-
tioning system is attached to the hood at the loca-
tion shown in the following illustration.

●

The meaning of each symbol on the label are as follows.

Caution

Air conditioning system

Air conditioning system lubricant type

Requires registered technician to service
air conditioning system

Flammable refrigerant

■

Changing of the air outlets while in automatic mode

When in automatic mode, if the humidity sensor detects fog on the inside of the wind-
shield, the air outlets will automatically be controlled to defog the windshield.

■

Using the voice command system

Air conditioning system can be operated using voice commands. For details, refer to
"MULTIMEDIA OWNER'S MANUAL"

■

Customization

Functions that are linked to automatic mode (when the [AUTO] switch is on) can be set
through [Vehicle customize] on the center display.

4-3. Adjusting the temperature/environment inside the vehicle

285

Interior feat

NOTICE

■

Humidity sensor

●

In order to detect fog on the windshield, a sensor which monitors the temperature of
the windshield, the surround humidity, etc., is installed.

●

Follow these points to avoid damaging the sensor:

•

Do not disassemble the sensor

•

Do not spray the glass cleaner on the sensor or subject it to strong impacts

•

Do not stick anything on the sensor

Related Links

Customizable features(P. 783)

Option screen switch

▶

14-inch center display model

Left-hand side temperature control switch

Airflow mode control switch

Option screen switch

Shortcut screen switch

Select to display shortcut icons for various functions.

[Sync] switch

Right-hand side temperature control switch

[A/C] switch

4-3. Adjusting the temperature/environment inside the vehicle

286

Outside/recirculated air mode switch

Fan speed control switch

[Off] switch

[AUTO] switch

Adjusting the temperature

Turn temperature control dial clockwise to increases the temperature and turn the
dial counterclockwise to decreases the temperature.
When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will match the setting for the driver’s side.

When the indicator on the [Sync] switch is off, turning the [Sync] switch on will illuminate
the [Sync] switch indicator and the temperature setting for the front passenger’s side will
become the same as that for the driver’s side.
When the front passenger’s side temperature adjustment switch is operated, the indicator
on the [Sync] switch will turn off and the temperature setting for the front passenger’s side
will be able to be adjusted.
When the indicator on the [A/C] switch is off, the blower and heater can be used.

Setting the fan speed

To increase the fan speed, select the [+] fan speed adjustment switch or slide the
icon of the fan speed adjustment switch right. To decrease the fan speed, select the
[-] fan speed adjustment switch or slide the icon of the fan speed adjustment switch
left.
Select the [Off] switch to turn the fan off.
The fan can also be stopped by touching and holding the [-] fan speed adjustment
switch or sliding the icon of the fan speed adjustment switch to the leftmost position
and holding it.

Changing the air flow mode

Select the airflow mode control switch

The airflow mode changes each time the switch is selected.
The air outlets and air volume changes according to the selected air flow mode.

: Air flows to the upper body

: Air flows to the upper body and feet

4-3. Adjusting the temperature/environment inside the vehicle

287

Interior feat

: Air flows to the feet

: Air flows to the feet and the windshield defogger operates

INFORMATION

■

Location of air outlets

Switching between outside air mode and recirculated air mode

Temporarily changing the air mode to recirculated air mode is recommended to
prevent dirty air from entering the vehicle, such as when in a tunnel or heavy traffic,
and to help cool the interior when the outside air temperature is high.
Select the outside/recirculated air mode switch.

The air mode changes between outside air mode and recirculated air mode each time the
switch is selected. When recirculated air mode is selected, the indicator will illuminate.
The air mode may change automatically depending on the temperature setting, tempera-
ture inside the vehicle, etc.

Front seat concentrated airflow mode (S-FLOW)

This function automatically controls the airflow of the air conditioning system to
prioritize airflow to the front seats. Fuel economy can be enhanced by reducing
unnecessary cooling.
Front seat concentrated airflow mode operates in the following situations.

●

No passengers are detected in the rear seats

●

The windshield defogger is not operating

The S-Flow switch is

(ON) on the option screen.

4-3. Adjusting the temperature/environment inside the vehicle

288

In front seat concentrated airflow mode, directing airflow to the front seats only
and to all seats can be switched via switch operation. When the mode has been
switched manually, automatic airflow control stops operating.

Select the option screen switch.

Select the [S-Flow] switch.

●

Indicator illuminated: Airflow to the front seats only

●

Indicator off: Airflow to all the seats

INFORMATION

■

Operation of automatic airflow control

●

In order to maintain a comfortable interior, airflow may be directed to seats
without passengers immediately after the hybrid system is started and at other
times depending on the outside temperature.

●

After the hybrid system is started, if passengers move around inside or enter/exit
the vehicle, the system cannot accurately detect the presence of passengers and
automatic airflow control will not operate.

■

Operation of manual airflow control

Even if the function is manually switched to directing airflow to only the front seats,
when a rear seat is occupied, it may automatically direct airflow to all seats.

■

To return to automatic airflow control

1. With the indicator off, turn the power switch off.

2. After 60 minutes or more elapse, turn the power switch to ON.

Eco air conditioning mode

The air conditioning is controlled with low fuel consumption prioritized such as
reducing fan speed, etc.

Select the option screen switch.

Select the [Eco heat/cool].

●

In Eco drive mode, the air conditioning system is controlled as follows to prioritize
fuel efficiency. To improve air conditioning performance, turn off Eco air condition-
ing mode.

•

Engine speed and compressor operation controlled to restrict heating/cooling
capacity.

•

Fan speed restricted when automatic mode is selected.

●

When the driving mode is set to Eco driving mode, the Eco air conditioning mode
will be turned on automatically. Even in this case, the Eco air conditioning mode can
be turned off by selecting the [Eco heat/cool].

4-3. Adjusting the temperature/environment inside the vehicle

289

Interior feat

Warming the interior quickly (Max heat)

When [Max heat] is turned on, in order to warm the interior quickly, the settings of
the air conditioning system will be changed immediately.

Select the shortcut screen switch.

Select the [Max heat] switch.

●

The temperature setting of the air conditioning system will be set to [Hi] and the
[AUTO] switch will be turned on.

●

Seat heaters will be set to Hi.

●

Heated steering wheel will be set to Hi.

●

In the following situations, the front passenger’s side seat heater/seat ventilator will
be set to [AUTO].

•

When [Climate concierge] is on

•

When the system determines that a passenger is in the front passenger seat

●

When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will also be set to [Hi].

INFORMATION

■

[Max heat]

●

The [Max heat] switch cannot be used to turn the setting off.

●

After the [Max heat] switch has been operated, the temperature setting can be
adjusted using the temperature control switches of the air conditioning system.

●

When [Climate concierge] is on, if the [AUTO] switch is turned on, the seat
heaters and seat ventilators of the front seats, and the heated steering wheel will
be operated automatically according to the temperature setting.

●

Each function can also be adjusted to the desired setting.

Cooling the interior quickly (Max cool)

When [Max cool] is turned on, in order to cool the interior quickly, the settings of
the air conditioning system will be changed immediately.

Select the shortcut screen switch.

Select the [Max cool] switch.

●

The temperature setting of the air conditioning system will be set to [Lo] and the
[AUTO] switch will be turned on.

●

Seat ventilators will be set to Hi.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

290

●

In the following situations, the front passenger’s side seat heater will be set to
[AUTO] .

•

When [Climate concierge] is on

●

In the following situations, the front passenger’s side seat heater/seat ventilator will
be set to [AUTO] .

•

When [Climate concierge] is on

•

When the system determines that a passenger is in the front passenger seat

●

When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will also be set to [Lo] .

INFORMATION

■

[Max cool]

●

The [Max cool] switch cannot be used to turn the setting off.

●

After the [Max cool] switch has been operated, the temperature setting can be
adjusted using the temperature control switches of the air conditioning system.

●

Each function can also be adjusted to the desired setting.

Adjusting the position of and opening and closing the air outlets

To adjust the position of and opening and closing the air outlets, perform the
following operations:

▶

Front center

Direct air flow to the left or right, up or
down

Turn the knob to open or close the vent

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

291

Interior feat

▶

Front side

Direct air flow to the left or right, up or
down

Turn the knob to open or close the vent

▶

Rear

Direct air flow to the left or right, up or
down

Turn the knob to open or close the vent

4-3. Adjusting the temperature/environment inside the vehicle

292

Heated steering wheel

Warm up the grip of the steering wheel.

WARNING

Care should be taken if anyone in the following categories comes in contact with the
steering wheel when the heater is on:

●

Babies, small children, the elderly, the sick and the physically challenged

●

Persons with sensitive skin

●

Persons who are fatigued

●

Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold
remedies, etc.)

NOTICE

Do not use the functions when the hybrid system is off.

INFORMATION

■

Operating conditions

When the power switch is ON.

Turn the steering heater ON/OFF

Select

on the center display.

Each time the switch is selected, the operation condition changes as follows.

AUTO

→

Hi (2 segments lit)

→

Lo (1 segment lit)

→

Off

The level indicator (red) lights up during operation. [AUTO] indicator lights up during
automatic operation.

INFORMATION

■

Customization

The temperature setting of the heated steering wheel can be set through [Vehicle
customize] on the center display.

4-3. Adjusting the temperature/environment inside the vehicle

293

Interior feat

Seat heaters

Warm up the seat upholstery.

WARNING

■

To prevent minor burn injuries

Care should be taken if anyone in the following categories comes in contact with the
seats when the heater is on:

●

Babies, small children, the elderly, the sick and the physically challenged

●

Persons with sensitive skin

●

Persons who are fatigued

●

Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold
remedies, etc.)

■

To prevent causes of overheating and minor burn injuries

Observe the following precautions when using a seat heater:

●

Do not cover the seat with a blanket or cushion when using the seat heater.

●

Do not use seat heater more than necessary.

NOTICE

■

To prevent damage to the seat heaters

Do not put heavy objects that have an uneven surface on the seat and do not stick sharp
objects (needles, nails, etc.) into the seat.

■

To prevent 12-volt battery discharge

Do not use the functions when the hybrid system is off.

INFORMATION

■

Operating conditions

The power switch is in ON.

Turn the front seat heaters ON/OFF

Select

on the center display.

Each time the switch is selected, the operation condition changes as follows.
AUTO

→

Hi (3 segments lit)

→

Mid (2 segments lit)

→

Lo (1 segment lit)

→

Off

The level indicator (red) lights up during operation. [AUTO] indicator lights up during
automatic operation.

4-3. Adjusting the temperature/environment inside the vehicle

294

INFORMATION

■

Customization

The temperature setting of the seat heaters of the front seats can be set through [Vehicle
customize] on the center display.

Turns the rear seat heaters on/off

Press the switch.

Each time the switch is pressed, the operation condi-
tion changes as follows.
Hi (3 segments lit)

→

Mid (2 segments lit)

→

Lo (1

segment lit)

→

Off

The level indicators (yellow) light up during operation.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

295

Interior feat

Seat ventilators

Using fans inside the seats, improved ventilation can be provided at the surface of
the seats.

NOTICE

■

To prevent damage to the seat ventilators

Do not put heavy objects that have an uneven surface on the seat and do not stick sharp
objects (needles, nails, etc.) into the seat.

■

To prevent 12-volt battery discharge

Do not use the functions when the hybrid system is off.

INFORMATION

■

Operating conditions

The power switch is in ON.

Turn the seat ventilators (front) ON/OFF

Select

on the center display.

Each time the switch is selected, the operation condition changes as follows.
Hi (3 segments lit)

→

Mid (2 segments lit)

→

Lo (1 segment lit)

→

Off

The level indicator (blue) lights up during operation. [AUTO] indicator lights up during
automatic operation.

INFORMATION

■

Air conditioning system-linked control mode

When a seat ventilator is set to Hi, the fan speed of the seat ventilator may increase
according to the fan speed of the air conditioning system.

■

Customization

The fan speed setting of the seat ventilators can be set through [Vehicle customize] on
the center display.

4-3. Adjusting the temperature/environment inside the vehicle

296

Using the moon roof

For comfortable cabin experience, the moon roof can be opened or tilted up.

WARNING

Observe the following precautions.

●

Do not allow any passengers to put their hands or heads outside the vehicle while it is
moving.

●

Do not sit on top of the moon roof.

●

The driver is responsible for moon roof opening and closing operations. In order to
prevent accidental operation, especially by a child, do not let a child operate the moon
roof. It is possible for children and other passengers to have body parts caught in the
moon roof.

●

Make sure that all passengers do not have any part of their body in a position where it
could be caught when the moon roof is being operated.

●

When using the wireless remote control or mechanical key to operate the moon roof,
operate the moon roof after making sure that there is no possibility of any passenger
having any of their body parts caught in the moon roof.
Also, do not let a child operate moon roof with the wireless remote control or
mechanical key. It is possible for children and other passengers to get caught in the
moon roof.

●

If a child is riding in the vehicle, when exiting the vehicle, turn the power switch off,
carry the key and exit the vehicle along with the child. If a child is left in the vehicle,
they may accidentally operate the moon roof, due to mischief, etc., possibly leading to
an accident.

INFORMATION

■

Operating conditions of the moon roof

The power switch is in ON.

■

Operating the moon roof after turning the hybrid system off

The moon roof can be operated for approximately 45 seconds after the power switch is
turned to ACC or OFF.
They cannot, however, be operated once either front door is opened.

■

Sunshade

The sunshade can be opened and closed manually. However, the sunshade will open
automatically when the moon roof is opened.

4-3. Adjusting the temperature/environment inside the vehicle

297

Interior feat

Related Links

Customizable features(P. 783)

Interior lights

INFORMATION

■

The front interior lights may not operate normally when

The front interior lights may not operate normally in the following situations:

●

When water, dirt, etc., have adhered to the lens surface

●

When operated with a wet hand

●

When wearing gloves, etc.

4-4. Illuminating the interior

301

Interior feat

Turning the interior lights on/off

Touch the light.

The front interior light will turn on/off each time it is
touched.
The rear interior light will also turn on/off.
However, when the rear interior light has already been
turned on, it will not be controlled by front interior light
operations.

Linking the opening/closing of the doors to the front interior light operation

Press the

switch.

The link between the front interior light operation and
doors will change between ON/OFF each time the

switch is pressed.

The operation of the rear interior lights will also be
linked to the opening/closing of the doors.

When the door link is turned on, the indicator

will

illuminate.

Turning the rear interior light on/off

Press the

switch.

The rear interior light will turn on/off each time the

switch is pressed.

Operation of the rear interior light is linked to the
turning on/off of the front interior light.
When the rear interior light has been turned on by
front interior light operation, the rear interior light
cannot be turned off by pressing the switch.

Personal lights

INFORMATION

■

The personal lights may not operate normally when

The personal lights may not operate normally in the following situations:

●

When water, dirt, etc., have adhered to the lens surface

●

When operated with a wet hand

●

When wearing gloves, etc.

4-4. Illuminating the interior

302

Using the interior features

Location of the storage features

WARNING

Do not leave eyeglasses, lighters or spray cans in the storage spaces, as the following
may occur when cabin temperature becomes high:

●

Eyeglasses may be deformed by heat or cracked if they come into contact with other
stored items.

●

Lighters or spray cans may explode. If they come into contact with other stored items,
a lighter may catch fire or a spray can may release gas, causing a fire hazard.

Glove box

Auxiliary boxes

Card holders

Bottle holders

Console box

Cup holders

Coin box

INFORMATION

■

Glove box light and console box light

The glove box light and the console box light turn on when the tail lights are on.

4-5. Using the interior features

304

Using the auxiliary boxes

Press in the lid.

WARNING

●

Do not store items heavier than 0.44 lb. (200 g). Doing so may cause the auxiliary
box to open and the items inside may fall out, resulting in an accident.

●

When driving or when the auxiliary box is not in use, keep the lid closed. In the event of
sudden braking or sudden swerving, an accident may occur due to an occupant being
struck by the items stored inside.

Push the lid.

To close, press in and release the lid.

WARNING

▶

Type A

▶

Type B

4-5. Using the interior features

305

Interior feat

Location of the card holders

Using the glove box

WARNING

When driving or when the glove box is not in use, keep it closed.
If left open, in the event of sudden braking or swerving, the front passenger may strike the
glove box lid or stowed items may fly out, possibly leading to an accident.

To open the glove box, pull the lever. The glove box can be locked and unlocked
using the mechanical key.

To open the glove box, pull the lever.

Lock with the mechanical key.

Unlock with the mechanical key.

INFORMATION

■

Glove box light

The glove box light turns on when the tail lights are on.

Use the cup holders

WARNING

●

Do not place anything other than cups or aluminum cans in the cup holders.
Other items may be thrown out of the holders in the event of an accident or sudden
braking, causing injury.
If possible, cover hot drinks to prevent burns.

4-5. Using the interior features

306

WARNING

●

Depending on the shape of the container installed in the cup holder, nearby switch
buttons may be touched by it, unintentionally operating the switch.

▶

Front

▶

Rear

Pull down the armrest.

Locations of the bottle holders

NOTICE

When using a bottle holder, observe the following precautions.

●

Do not place open bottles, glass cups, or paper cups containing liquid in the bottle
holders.
The liquid may spill out and glass cups may break.

●

When storing a bottle, close the cap.

4-5. Using the interior features

307

Interior feat

INFORMATION

■

Bottle holders

A bottle may not be able to be stored depending on its size or shape.

Using the console box

WARNING

When driving or when the console box is not in use, keep it closed.
If left open, in the event of sudden braking or swerving, an occupant may strike the
console box lid or stowed items may fly out, possibly leading to an accident.

To open the console box, press the button and lift the lid.

The console box can be opened from either side.

▶

Front

▶

Rear

4-5. Using the interior features

308

INFORMATION

■

Console box light

The console box light turns on when the tail lights are on.

Using the coin box

WARNING

When driving or when the coin box is not in use, keep it closed.
If left open, in the event of sudden braking or sudden swerving, the driver may strike the
coin box lid or stowed items may fly out, possibly leading to an accident.

Push the knob up to open the
lid.

4-5. Using the interior features

309

Interior feat

Convenient interior features

Function and operation of the USB charging port

NOTICE

■

To prevent damage to the USB charging ports

●

Do not insert foreign objects into the ports.

●

Do not spill water or other liquids into the ports.

●

Rear console: When the USB charging ports are not in use, close the lids. If a foreign
object or liquid enters a port may cause a short circuit.

●

Do not apply excessive force to or impact the USB charging ports.

●

Do not disassemble or modify the USB charging ports.

■

To prevent damage to external devices

●

Do not leave external devices in the vehicle. The temperature inside the vehicle may
become high, resulting in damage to an external device.

●

Do not push down on or apply unnecessary force to an external device or the cable of
an external device while it is connected.

■

To prevent 12-volt battery discharge

Do not use the USB charging ports for a long period of time with the hybrid system
stopped.

The USB charging ports are used to supply 3.0 A of electricity at 5 V to external
devices.
The USB charging ports are for charging only. They are not designed for data
transfer or other purposes.
Depending on the external device, it may not charge properly. Refer to the manual
included with the device before using a USB charging port.

INFORMATION

■

The USB charging ports can be used when

The power switch is in ACC or ON.

■

Situations in which the USB charging ports may not operate correctly

●

If a device which consumes more than 3.0 A at 5 V is connected.

●

If a device designed to communicate with a personal computer, such as a USB
memory device, is connected

●

If the connected external device is turned off (depending on device)

4-5. Using the interior features

310

Lexus NX450H+ (2024 year). Manual in english - page 9