Lexus NX350h (2024 year). Manual in english

●

If the vehicle is parked without setting the parking brake, confirm that the shift
position cannot be moved out of P.

●

If the vehicle is left parked with the brakes damp in cold temperatures, there is a
possibility of the brakes freezing.

INFORMATION

■

Linked mirror function when reversing

When used in cold weather during reverse driving, the door mirror could be frozen and
may not automatically point the mirror surface downward. In this event, remove any ice
and snow from the mirror surface.

Warming the windshield to allow frozen wipers to be moved

Use the windshield wiper de-icer to help prevent the windshield wiper blades from
freezing to the windshield.
Select the [Deicer] switch on the option screen.

The windshield wiper de-icer will automatically turn off after a period of time.

WARNING

Do not touch the lower part of the windshield or parts along the front pillars when the
windshield wiper de-icer is on, as they will be hot and may cause burns.

* :

If equipped

3-5. Driving when it is cold

215

Driving accor

ding to the conditions

Driving in low visibility conditions

Fog light illumination

When driving in inclement weather, such as in rain and fog, turn on the front fog
lights to ensure forward visibility.

Using the fog lights

NOTICE

To prevent 12-volt battery discharge, do not leave the lights on longer than necessary
when the hybrid system is off.

(U.S.A.) or

(Canada) Turns the

front fog lights off

Turns the front fog lights on

INFORMATION

■

Fog lights can be used when

The low beam headlights are on.

3-6. Driving in low visibility conditions

216

Utility vehicle precautions

This vehicle belongs to the utility vehicle class, which has higher ground clearance
and narrower tread in relation to the height of its center of gravity.

Utility vehicle feature

●

Specific design characteristics give it a higher center of gravity than ordinary
passenger cars. This vehicle design feature causes this type of vehicle to be
more likely to rollover. Utility vehicles have a significantly higher rollover rate
than other types of vehicles.

●

An advantage of the higher ground clearance is a better view of the road
allowing you to anticipate problems.

●

It is not designed for cornering at the same speeds as ordinary passenger
cars any more than low-slung sports cars designed to perform satisfactorily
under off-road conditions. Therefore, sharp turns at excessive speeds may cause
rollover.

WARNING

■

Utility vehicle precautions

Always observe the following precautions to minimize the risk of death or serious injury
or damage to your vehicle:

●

In a rollover crash, an unbelted person is significantly more likely to die than a person
wearing a seat belt. Therefore, the driver and all passengers should always fasten their
seat belts.

●

Avoid sharp turns or abrupt maneuvers, if at all possible. Failure to operate this vehicle
correctly may result in loss of control or vehicle rollover causing death or serious
injury.

●

Loading cargo on the roof luggage carrier (if equipped) will make the center of the
vehicle gravity higher. Avoid high speeds, sudden starts, sharp turns, sudden braking
or abrupt maneuvers, otherwise it may result in loss of control or vehicle rollover due
to failure to operate this vehicle correctly.

●

Always slow down in gusty crosswinds. Because of its profile and higher center of
gravity, your vehicle is more sensitive to side winds than an ordinary passenger car.
Slowing down will allow you to have better control.

●

Do not drive horizontally across steep slopes. Driving straight up or straight down is
preferred. Your vehicle (or any similar off-road vehicle) can tip over sideways much
more easily than forward or backward.

3-7. Utility vehicle precautions

218

Off-road driving

Your vehicle is not designed to be driven off-road. However, in the event that
off-road driving cannot be avoided, please observe the following precautions to
help avoid the areas prohibited to vehicles.

●

Drive your vehicle only in areas where off-road vehicles are permitted to travel.

●

Respect private property. Get owner’s permission before entering private prop-
erty.

●

Do not enter areas that are closed. Honor gates, barriers and signs that restrict
travel.

●

Stay on established roads. When conditions are wet, driving techniques should
be changed or travel delayed to prevent damage to roads.

●

Avoid driving on very steep, slippery roads and other surfaces, such as sand,
where the tires are liable to lose traction. Your vehicle may not perform as well
as conventional AWD on-road vehicles on these surfaces.

INFORMATION

■

Additional information for off-road driving

For owners in U.S. mainland, Hawaii and Puerto Rico:
To obtain additional information pertaining to driving your vehicle off-road, consult the
following organizations.

●

State and Local Parks and Recreation Departments

●

State Motor Vehicle Bureau

●

Recreational Vehicle Clubs

●

U.S. Forest Service and Bureau of Land Management

WARNING

■

Off-road driving precautions

Always observe the following precautions to minimize the risk of death or serious injury
or damage to your vehicle:

●

Drive carefully when off the road. Do not take unnecessary risks by driving in danger-
ous places.

●

Do not grip the steering wheel spokes when driving off-road. A bad bump could jerk
the wheel and injure your hands. Keep both hands and especially your thumbs on the
outside of the rim.

●

Always check your brakes for effectiveness immediately after driving in sand, mud,
water or snow.

3-7. Utility vehicle precautions

219

Driving accor

ding to the conditions

WARNING

●

After driving through tall grass, mud, rock, sand, water, etc., check that there is no
grass, bush, paper, rags, stone, sand, etc. adhering or trapped to the underbody. Clear
off any such matter from the underbody. If the vehicle is used with these materials
trapped or adhering to the underbody, a breakdown or fire could occur.

●

When driving off-road or in rugged terrain, do not drive at excessive speeds, jump,
make sharp turns, strike objects, etc. This may cause loss of control or vehicle rollover
causing death or serious injury. You are also risking expensive damage to your
vehicle’s suspension and chassis.

NOTICE

■

To prevent water damage

Take all necessary safety measures to ensure that water damage to the hybrid battery
(traction battery), hybrid system or other components does not occur.

●

Water entering the engine compartment may cause severe damage to the hybrid
system. Water entering the interior may cause the hybrid battery stowed under the
rear seats to short circuit.

●

Water entering the hybrid transmission and rear electric motor (traction motor) will
cause deterioration in transmission quality. The malfunction indicator may come on,
and the vehicle may not be drivable.

●

Water can wash the grease from wheel bearings, causing rusting and premature
failure, and may also enter the hybrid transmission case, reducing the gear oil’s
lubricating qualities.

■

When you drive through water

If driving through water, such as when crossing shallow streams, first check the depth of
the water and the bottom of the riverbed for firmness. Drive slowly and avoid deep water.

■

Inspection after off-road driving

●

Sand and mud that has accumulated around brake discs may affect braking efficiency
and may damage brake system components.

●

Always perform a maintenance inspection after each day of off-road driving that has
taken you through rough terrain, sand, mud, or water. For scheduled maintenance
information, refer to the "Warranty and Services Guide/Owner’s Manual Supple-
ment/Scheduled Maintenance".

3-7. Utility vehicle precautions

220

Changing the driving characteristics

Driving modes

The following driving modes can be used according to the driving/usage condi-
tions.

Characteristics of each driving mode

■

Normal mode

Suitable when driving in the city, for good fuel consumption efficiency, silence, and
drive-ability.

■

Eco mode

In contrast with Normal mode, torque generation is slower when stepping on the
accelerator pedal, air conditioning operations (heating/cooling) are restrained,
and driving becomes suited for improved fuel consumption.

■

Sport mode

Helps to ensure steering feel and accelerator response by controlling the hybrid
system and transmission. Suitable for sporty, fun driving, such as when driving on
mountain roads.

INFORMATION

■

Operation of the air conditioning system in Eco mode

●

In the Eco mode, the air conditioning system is controlled as follows to prioritize fuel
efficiency.

•

Engine speed and compressor operation controlled to restrict heating/cooling
capacity

•

Fan speed restricted when automatic mode is selected

●

To improve air conditioning performance, perform the following operations:

•

Adjust the fan speed

•

Adjust the temperature setting

•

Turn off Eco mode

●

When the driving mode is set to Eco mode, the air conditioning system may automati-
cally change to Eco mode. To cancel eco mode, press [Eco heat/cool].

3-8. Changing the driving characteristics

221

Driving accor

ding to the conditions

Changing the driving mode

Eco mode
When not in Eco mode, turn the driving
mode select switch to the left to change
the driving mode to Eco mode. The Eco
drive mode indicator will be displayed on
the multi-information display.

Sport mode
When not in Sport mode, turn the driving
mode select switch to the right to change
the driving mode to Sport mode. The Sport
mode indicator will be displayed on the
multi-information display.

Normal mode
Press the driving mode select switch to
change the driving mode to Normal mode
when Eco mode or Sport mode is selected.

INFORMATION

■

Canceling Sport mode

●

Select another driving mode. Also, Sport mode will be canceled automatically when
the power switch is turned off.

●

Normal mode and Eco mode will not be canceled automatically until another driving
mode is selected, even if the power switch is turned off.

■

Display of the multi-information display according to selected driving mode

According to the driving mode selected, the gauges displayed on the multi-information
display may change.

Related Links

Customizable features(P. 751)

3-8. Changing the driving characteristics

222

Trail Mode (AWD vehicles)

Trail Mode is designed to control the spinning of the drive wheels by integradely
controlling 4WD, brake and drive force control systems. Use the Trail Mode when
driving bumpy roads, etc.

●

Press the Trail Mode switch.

Press the Trail Mode switch, to turn the Trail Mode
on. The Trail Mode indicator light will come on the
multi-information display. To turn the system off,
press the Trail Mode switch again.
If the tires are spinning, the slip indicator flashes to
indicate that the Trail Mode is controlling the spin-
ning of the tires.

INFORMATION

■

Trail Mode

●

Trail Mode controls the vehicle so that it can use the maximum amount of drive
force when driving on rough roads. As a result, fuel efficiency may diminish when
compared to driving with Trail Mode off.

●

If Trail Mode is continuously used for a long period of time, depending on the
driving conditions, the load on related parts increases and the system may not
function correctly. In this case, "Traction Control Turned OFF" will be shown on
the multi-information display but the vehicle can be driven normally. The "Traction
Control Turned OFF" on the multi-information display will turn off after a short
while and the system will operate properly.

■

When Trail Mode is canceled

In the following situations, Trail Mode is automatically canceled even if it is selected:

●

When the driving mode is changed.

●

When the hybrid system is restarted.

■

Sounds and vibrations when driving in Trail Mode

Any of the following conditions may occur when Trail Mode is operating. None of
these indicates that a malfunction has occurred:

3-8. Changing the driving characteristics

223

Driving accor

ding to the conditions

●

Vibrations may be felt throughout the vehicle or steering

●

Sounds may be heard from the engine compartment

■

When the Trail Mode indicator does not illuminate

When the Trail Mode indicator does not illuminate even thourgh the Trail Mode switch
is pressed, the system may be malfunctioning.
Have the vehicle checked by your Lexus dealer immediately.

WARNING

■

Before using Trail Mode

Make sure to observe the following precautions. Failure to observe these precautions
may result in an unexpected accident.

●

Trail mode is intended for use when driving on rough roads.

●

Check that the Trail Mode indicator is illuminated before driving.

●

Trail Mode is not intended to expand the limits of the vehicle. Thoroughly check the
road conditions and drive with caution.

NOTICE

■

In order to ensure that Trail Mode operates properly

Do not continuously use the Trail Mode for a long period of time. Depending on the
driving conditions, the load on related parts increases and the system may not operate
properly.

Related Links

Changing the driving mode(P. 222)

3-8. Changing the driving characteristics

224

EV drive mode

Changing to EV drive mode

In EV drive mode, electric power is supplied by the hybrid battery (traction
battery), and only the electric motor (traction motor) is used to drive the vehicle.
This mode allows you to drive in residential areas early in the morning and late at
night, or in indoor parking lots, etc., without concern for noises and gas emissions.
Press the EV drive mode switch.

When EV drive mode is turned on, the EV drive mode
indicator will come on.
Pressing the switch when in EV drive mode will return
the vehicle to normal driving (using the gasoline en-
gine and electric motor [traction motor]).

INFORMATION

■

Situations in which EV drive mode cannot be turned on

It may not be possible to turn EV drive mode on in the following situations. If it cannot
be turned on, a buzzer will sound and a message will be shown on the multi-information
display.

●

The temperature of the hybrid system is high.
The vehicle has been left in the sun, driven on a hill, driven at high speeds, etc.

●

The temperature of the hybrid system is low.
The vehicle has been left in temperatures lower than about 68 °F (20 °C) for a long
period of time, etc.

●

The gasoline engine is warming up.

●

The hybrid battery (traction battery) is low.
The remaining battery level indicated in the "Energy Monitor" display is low.

●

Vehicle speed is high.

●

The accelerator pedal is depressed firmly or the vehicle is on a hill, etc.

●

The windshield defogger is in use.

■

Switching to EV drive mode when the gasoline engine is cold

If the hybrid system is started while the gasoline engine is cold, the gasoline engine will
start automatically after a short period of time in order to warm up. In this case, it will not
be possible to switch to EV drive mode.
After the hybrid system has started and the "READY" indicator has illuminated, press the
EV drive mode switch before the gasoline engine starts to switch to EV drive mode.

3-9. EV drive mode

225

Driving accor

ding to the conditions

■

Automatic cancelation of EV drive mode

When driving in EV drive mode, the gasoline engine may automatically restart in the
following situations. When EV drive mode is canceled, a buzzer will sound, the EV drive
mode indicator will go off after flashing, and a message is displayed on the multi-informa-
tion display.

●

The hybrid battery (traction battery) becomes low.
The remaining battery level indicated in the "Energy Monitor" display is low.

●

Vehicle speed is high.

●

The accelerator pedal is depressed firmly or the vehicle is on a hill, etc.

■

Possible driving distance when driving in EV drive mode

EV drive mode's possible driving distance ranges from a few hundred meters to approxi-
mately 0.6 mile (1 km). However, depending on vehicle conditions, there are situations
when EV drive mode cannot be used.
(The distance that is possible depends on the hybrid battery [traction battery] level and
driving conditions.)

■

Fuel economy

The hybrid system is designed to achieve the best possible fuel economy during normal
driving (using the gasoline engine and electric motor [traction motor]). Driving in EV
drive mode more than necessary may lower fuel economy.

WARNING

When driving in EV drive mode, pay special attention to the area around the vehicle.
Because there is no engine noise, pedestrians, people riding bicycles or other people and
vehicles in the area may not be aware of the vehicle starting off or approaching them, so
take extra care while driving. Therefore, take extra care while driving even if the acoustic
vehicle alerting system is active.

3-9. EV drive mode

226

Brake hold system

WARNING

■

When the vehicle is on a steep incline

When using the brake hold system on a steep incline, exercise caution. The brake hold
function may not hold the vehicle in such a situation.

■

When stopped on a slippery road

The system cannot stop the vehicle when the gripping ability of the tires has been
exceeded. Do not use the system when stopped on a slippery road.

NOTICE

■

When parking the vehicle

The brake hold system is not designed for use when parking the vehicle for a long period
of time. Turning the power switch off while the system is holding the brake may release
the brake, which would cause the vehicle to move. When operating the power switch,
depress the brake pedal, shift the shift position to P and set the parking brake.

Turns the brake hold system on

The brake hold system keeps the brake applied when the shift position is in D, S or
N with the system on and the brake pedal has been depressed to stop the vehicle.
The system releases the brake when the accelerator pedal is depressed with the
shift position in D or S to allow smooth start off.
Turns the brake hold system on
The brake hold standby indicator (green) comes
on. While the system is holding the brake, the
brake hold operated indicator (yellow) comes on.

INFORMATION

■

Brake hold system operating conditions

The brake hold system cannot be turned on in the following conditions:

3-10. Brake hold system

227

Driving accor

ding to the conditions

●

The driver’s door is not closed.

●

The driver is not wearing the seat belt.

●

The parking brake is engaged.

●

"EPB Activation Stopped Incompletely" or "Parking Brake Malfunction Visit Your
Dealer" is displayed on the multi-information display.

If any of the conditions above are detected when the brake hold system is enabled, the
system will turn off and the brake hold standby indicator light will go off. In addition, if any
of the conditions are detected while the system is holding the brake, a warning buzzer will
sound and a message will be shown on the multi-information display. The parking brake
will then be set automatically.

■

Brake hold function

●

If the brake pedal is left released for a period of about 3 minutes after the system has
started holding the brake, the parking brake will be set automatically. In this case, a
warning buzzer sounds and a message is shown on the multi-information display.

●

The brake hold function may not hold the vehicle when the vehicle is on a steep
incline. In this situation, it may be necessary for the driver to apply the brakes. A
warning buzzer will sound and the multi-information display will inform the driver of
this situation. If a warning message is shown on the multi-information display, read the
message and follow the instructions.

●

To turn the system off while the system is holding the brake, firmly depress the brake
pedal and press the button again.

●

When do not wish for the parking brake to operate automatically, press and hold the
brake hold switch until the standby indicator (green) turns off, and then turn the power
switch off.

■

When the parking brake is set automatically while the system is holding the brakes

Perform any of the following operations to release the parking brake.

●

Depress the accelerator pedal. (The parking brake will not be released automatically if
the seat belt is not fastened.)

●

Operate the parking brake switch with the brake pedal depressed.

Make sure that the parking brake indicator light goes off.

■

When an inspection at your Lexus dealer is necessary

When the brake hold standby indicator (green) does not illuminate even when the brake
hold switch is pressed with the brake hold system operating conditions met, the system
may be malfunctioning.
Have the vehicle checked by your Lexus dealer immediately.

■

If "Brake Hold Malfunction" is displayed on the multi-information display

The system may be malfunctioning.

3-10. Brake hold system

228

Have the vehicle checked by your Lexus dealer immediately.

■

Warning messages and buzzers

Warning messages and buzzers are used to indicate a system malfunction or to inform
the driver of the need for caution. If a warning message is shown on the multi-information
display, read the message and follow the instructions.

3-10. Brake hold system

229

Driving accor

ding to the conditions

Favorite settings

My Settings

By recognizing an individual through a device, such as an electronic key, the
driving position and vehicle settings recorded for that driver can be recalled when
the vehicle is entered. By assigning an authentication device to a driver in advance,
the driver can enter the vehicle with their preferred settings. Settings for up to
3 drivers can be recorded by My Settings. For details on how to assign/delete
electronic keys, set driver names, perform initialization, change drivers manually, or
delete a driver, refer to the "MULTIMEDIA OWNER'S MANUAL".

■

Types of assigned authentication devices

An individual can be identified using the following authentication devices.

●

Electronic key
or Digital key

An individual is identified when the smart access system with push-button start detects
their electronic key or digital keys

●

Bluetooth devices

An individual can be detected if the same Bluetooth device that was used as a hands-
free phone the last time the vehicle was entered is connected to the audio system.

■

Recalled functions

When an individual is identified from an authentication device, settings for the
following functions are recalled.

●

Driving position (memory recall function)

After an individual is identified, the driving position that was set when driving was last
completed is recalled when the following operation is performed.
The door is unlocked and opened using the smart access system with push-button start
or wireless remote control.

●

Meter displays, head-up display

and multimedia information

When an individual is identified, the vehicle settings used when the power switch was last
turned off are recalled.

●

Vehicle settings that can be set using the center display

When an individual is identified, the vehicle settings used when the power switch was last
turned off are recalled.

●

Safe driving support function

* :

If equipped

*1 :

Some settings are excluded

4-1. Favorite settings

232

Adjusting the preferred driving position

Enabling easier driver entry and exit (Power easy access system)

WARNING

Never use any part of your body to intentionally activate the jam protection function.

When all of the following have been performed,
the driver’s seat and steering wheel are automat-
ically adjusted to a position that allows driver to
enter and exit the vehicle easily.

●

The shift position has been shifted to P.

●

The power switch has been turned to ACC or ON.

●

The driver’s seat belt has been unfastened.

When any of the following has been performed, the driver’s seat and steering
wheel automatically return to their original positions.

●

The power switch has been turned to ACC mode or ON.

●

The driver’s seat belt has been fastened.

INFORMATION

■

Operation of the power easy access system

When exiting the vehicle, the power easy access system may not operate if the seat is
already close to the rearmost position, etc.

■

Jam protection function

While the power easy access system is operating, if an object is stuck behind the front
seat, the front seat will stop and then slightly move forward. When the jam protection
function operates, the seat stops at a position other than the set seat position. Check the
seat position.

Related Links

Customizable features(P. 751)

4-2. Adjusting the preferred driving position

234

Driving position registration/recall/deletion

This feature automatically adjusts the positions of the driver’s seat, steering wheel,
outside rear view mirrors and head-up display

to make entering and exiting the

vehicle easier or to suit your preferences.
Vehicle with the My Settings:
Up to 3 different driving positions can be recorded for each the driver and guest
that have been registered for My Settings. When electronic key (including a card
key) assignment is registered for My Settings, the driving position for each driver
can be recalled (memory recall function).
Vehicle without the My Settings:
Up to 3 different driving positions can be recorded.

INFORMATION

■

Using the voice control system

The following operations can be performed using the voice control system:

●

Driving position registration

●

Driving position recall (only when the shift position is in P)

For details, refer to the "MULTIMEDIA OWNER'S MANUAL".

Registering a driving position into memory (position memory function)

Check that the shift position is in P.

Turn the power switch to ON.

Adjust the driver’s seat, steering wheel, outside rear view mirrors and head-up
display

to the desired positions.

While pressing the “SET” button, or within
3 seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the buzzer
sounds.

If a driving position has already been registered
to the selected button, the previously registered
position will be overwritten.

* :

If equipped

4-2. Adjusting the preferred driving position

235

Interior feat

INFORMATION

■

Seat positions that can be memorized

The adjusted positions other than the position adjusted by lumbar support switch can
be recorded.

■

In order to correctly use the driving position memory function

If a seat position is already in the furthest possible position and the seat is operated in
the same direction, the registered position may be slightly different when it is recalled.

WARNING

Take care during seat adjustment so that the seat does not contact a rear passenger
or squeeze your body against the steering wheel.

Recalling a driving position (position memory function)

WARNING

Never use any part of your body to intentionally activate the jam protection function.

Check that the shift position is in P.

Turn the power switch to ON.

Press one of the buttons for the driving po-
sition you want to recall until the buzzer
sounds.

INFORMATION

■

To stop the position recall operation part-way through

Perform any of the following:

●

Press the “SET” button.

●

Press button “1”, “2” or “3”.

●

Operate any of the seat adjustment switches (only cancels seat position recall).

●

Operate the tilt and telescopic steering control switch (only cancels steering
wheel position recall).

4-2. Adjusting the preferred driving position

236

■

Operating the driving position memory after turning the power switch off

Registered seat positions can be recalled up to 180 seconds after the driver’s door is
opened and another 61 seconds after it is closed again.

■

When the recorded seat position cannot be recalled

The seat position may not be recalled in some situations when the seat position is
recorded in a certain range.
For details, contact your Lexus dealer.

■

Jam protection function

While the driving position is recalled or the power easy access system is operating, if
an object is stuck behind the front seat, the front seat will stop and then slightly move
forward. When the jam protection function operates, the seat stops at a position
other than the set seat position. Check the seat position.

■

Recalling a driving position

Take care so that a head restraint does not contact the ceiling or a sun visor.

Registering/canceling/recall a driving position to an electronic key
(memory recall function) (vehicles with a My Settings function)

■

Identifying a driver with the electronic key assigned and registered

The driving positions can be automatically recalled for each registered driver by
registering electronic key assignments in My Settings.

Driving position registration procedure

When the shift position is shifted to P after driving the vehicle, the current driving
position will be recorded.

Driving position recall procedure

Carry only the key that has been assigned and registered in My Settings, and
then unlock and open the driver’s door using the smart access system with
push-button start or wireless remote control.

The driving position other than the steering wheel and head-up display (if equipped)
will move to the recorded position. However, the seat will move to a position slightly
behind the recorded position in order to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the driving
position will not move.

Turn the power switch to ACC or ON.

*1 :

Driver’s side only

4-2. Adjusting the preferred driving position

237

Interior feat

The seat, steering wheel and head-up display (if equipped) (only when the power
switch is in ON) will move to the recorded position.

INFORMATION

■

Recalling the driving position using the memory recall function

Different driving positions can be registered for each electronic key. Therefore, the
driving position that is recalled may be different depending on the key being carried.

■

Jam protection function

Memory recall function cancelation procedure

Initialize the driver registered settings in My Settings.
For information on initializing driver registered settings, refer to the "MULTIME-
DIA OWNER'S MANUAL".

Registering/canceling/recall a driving position to an electronic key
(memory recall function) (vehicles without a My Settings function)

■

Identifying a driver with the electronic key assigned and registered

Each electronic key can be registered to automatically recall your preferred
driving position.

Driving position registration procedure

Record your driving position to button “1”, “2” or “3” before performing the
following:
Carry only the key you want to register, and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be recorded
properly.

Check that the shift position is in P.

Turn the power switch to ON.

Recall the driving position that you want to record.

While pressing the recalled button, press and hold the door lock switch (either
lock or unlock) until the buzzer sounds.

*2 :

Driver’s side only

4-2. Adjusting the preferred driving position

238

If the button could not be registered, the buzzer sounds continuously for approximately
3 seconds.

Driving position recall procedure

Make sure that the doors are locked before recalling the driving position.
Carry the electronic key that has been registered to the driving position, and
then unlock and open the driver’s door using the smart access system with
push-button start or wireless remote control.

The driving position will move to the recorded position (not including the steering
wheel and head-up display [if equipped]). However, the seat will move to a position
slightly behind the recorded position in order to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the seat and
outside rear view mirrors will not move.

Turn the power switch to ACC or ON, or fasten a seat belt.

The seat, steering wheel and head-up display (if equipped) will move to the recorded
position.

INFORMATION

■

Recalling the driving position using the memory recall function

●

Different driving positions can be registered for each electronic key. Therefore,
the driving position that is recalled may be different depending on the key being
carried.

●

If a door other than the driver’s door is unlocked with the smart access system with
push-button start, the driving position cannot be recalled. In this case, press the
driving position button which has been set.

Memory recall function cancelation procedure

Carry only the key you want to cancel and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.

4-2. Adjusting the preferred driving position

239

Interior feat

Adjusting the temperature/environment inside the vehicle

Comfortable condition to be maintained without adjusting each system
(Lexus Climate Concierge)

Operation of the seat heaters and seat ventilators of the front seats and the heated
steering wheel

is performed automatically according to the temperature setting

of the air conditioning system, outside temperature, temperature inside the vehicle,
etc.

Lexus Climate Concierge

Lexus Climate Concierge operates in conjunction with [AUTO] of the air condi-
tioning system.

Select the option screen switch.

→

P.245

Select the [Climate concierge] switch.

Turn the [AUTO] switch on.

Automatically controllable functions

●

Automatic air conditioning system

→

P.243

Operation of the air conditioning system is performed automatically according to the
temperature setting for the driver's side/front passenger's side.

●

Seat heaters

→

P.253

Operation of the seat heaters is performed automatically according to the temperature
setting for the driver's side/front passenger's side.
Operation will automatically change between the seat heaters and seat ventilators ac-
cording to the temperature setting of the air conditioning system, outside temperature,
etc.

●

Seat ventilators

→

P.255

Operation of the seat ventilators is performed automatically according to the tempera-
ture setting for the driver's side/front passenger's side.
Operation will automatically change between the seat heaters and seat ventilators ac-
cording to the temperature setting of the air conditioning system, outside temperature,
etc.

●

Heated steering wheel

→

P.252

Operation of the heated steering wheel is performed automatically according to the
temperature setting of the air conditioning system, outside temperature, etc.

* :

If equipped

4-3. Adjusting the temperature/environment inside the vehicle

241

Interior feat

INFORMATION

■

Passenger detection functions

●

When a passenger is detected in the front passenger seat, the seat heater and
ventilator will operate automatically.

●

When the seat heater/seat ventilator switch is set to AUTO, the passenger detection
function will not operate.

■

Rear seat heater operation (vehicles with rear seat heaters)

The rear seat heaters are not controlled by the Lexus Climate Concierge.

4-3. Adjusting the temperature/environment inside the vehicle

242

Air conditioning controls

When the [AUTO] switch is on, the air outlets and fan speed will automatically be
changed according to the set temperature.

NOTICE

●

Do not leave the air conditioning system on longer than necessary when the hybrid
system is off.

●

When repairing/replacing parts of the air conditioning system, have repair/replace-
ment performed by your Lexus dealer. When a part of the air conditioning system,
such as the evaporator, is to be replaced, it must be replaced with a new one.

INFORMATION

■

When the outside temperature exceeds 75°F (24°C) and the air conditioning
system is on

●

In order to reduce the air conditioning power consumption, the air conditioning
system may switch to recirculated air mode automatically. This may also reduce fuel
consumption.

●

Recirculated air mode is selected as a default mode when the power switch is turned
to ON mode.

●

It is possible to switch to outside air mode at any time by select the outside/recirculat-
ed air mode switch.

■

When driving on dusty roads

Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after
closing the windows, it is recommended that the air intake mode be set to outside air
mode and the fan speed to any setting except off.

■

When the outside temperature is low

The dehumidification function may not operate even when [A/C] is selected.

■

Ventilation and air conditioning odors

●

To let fresh air in, set the air conditioning system to the outside air mode.

●

During use, various odors from inside and outside the vehicle may enter into and
accumulate in the air conditioning system. This may then cause odor to be emitted
from the vents.

●

To reduce potential odors from occurring:

•

It is recommended that the air conditioning system be set to outside air mode prior
to turning the vehicle off.

•

The start timing of the blower may be delayed for a short period of time immediate-
ly after the air conditioning system is started in automatic mode.

4-3. Adjusting the temperature/environment inside the vehicle

243

Interior feat

●

When parking, the system automatically switches to outside air mode to encourage-
better air circulation throughout the vehicle, helping to reduce odors that occur when
starting the vehicle.

■

Air conditioning system refrigerant

●

A label regarding the refrigerant of the air condi-
tioning system is attached to the hood at the loca-
tion shown in the following illustration.

●

The meaning of each symbol on the label are as follows.

Caution

Air conditioning system

Air conditioning system lubricant type

Requires registered technician to service
air conditioning system

Flammable refrigerant

■

Using the voice command system

Air conditioning system can be operated using voice commands. For details, refer to
"MULTIMEDIA OWNER'S MANUAL"

■

Customization

Functions that are linked to automatic mode (when the [AUTO] switch is on) can be set
through [Vehicle customize] on the center display.

Related Links

Customizable features(P. 751)

4-3. Adjusting the temperature/environment inside the vehicle

244

Option screen switch

▶

14-inch center display model

Left-hand side temperature control switch

Airflow mode control switch

Option screen switch

Shortcut screen switch

Select to display shortcut icons for various functions.

[Sync] switch

Right-hand side temperature control switch

[A/C] switch

Outside/recirculated air mode switch

Fan speed control switch

[Off] switch

[AUTO] switch

▶

9.8-inch center display model

Left-hand side temperature control switch

Airflow mode control switch

Option screen switch

Shortcut screen switch

Select to display shortcut icons for various functions.

4-3. Adjusting the temperature/environment inside the vehicle

245

Interior feat

Right-hand side temperature control switch

[SYNC] switch

[A/C] switch

Outside/recirculated air mode switch

Fan speed control switch

[OFF] switch

[AUTO] switch

Adjusting the temperature

Turn temperature control dial clockwise to increases the temperature and turn the
dial counterclockwise to decreases the temperature.
When the indicator on the [Sync] switch is illuminated, the temperature setting for
the front passenger’s side will match the setting for the driver’s side.

When the indicator on the [Sync] switch is off, turning the [Sync] switch on will illuminate
the [Sync] switch indicator and the temperature setting for the front passenger’s side will
become the same as that for the driver’s side.
When the front passenger’s side temperature adjustment switch is operated, the indicator
on the [Sync] switch will turn off and the temperature setting for the front passenger’s side
will be able to be adjusted.
When the indicator on the [A/C] switch is off, the blower and heater can be used.

Setting the fan speed

To increase the fan speed, select the [+] fan speed adjustment switch or slide the
icon of the fan speed adjustment switch right. To decrease the fan speed, select the
[-] fan speed adjustment switch or slide the icon of the fan speed adjustment switch
left.
Select the [Off] switch to turn the fan off.
The fan can also be stopped by touching and holding the [-] fan speed adjustment
switch or sliding the icon of the fan speed adjustment switch to the leftmost position
and holding it.

Changing the air flow mode

Select the airflow mode control switch

The airflow mode changes each time the switch is selected.
The air outlets and air volume changes according to the selected air flow mode.

: Air flows to the upper body

4-3. Adjusting the temperature/environment inside the vehicle

246

Lexus NX350h (2024 year). Manual in english - page 7