Lexus NX350h (2024 year). Manual in english

NOTICE

Immediately stop the vehicle in a safe place on level ground, apply the parking brake, and
then contact your Lexus dealer.

●

When the warning message indicating the shift control system appears on the multi-in-
formation display.

●

The display indicates that no shift position is selected for more than a few seconds.

■

Hybrid battery (traction battery) charge

If the shift position is in N, the hybrid battery (traction battery) will not be charging, even
when the engine is running. Therefore, if the vehicle is left with the shift position in N, the
hybrid battery (traction battery) will discharge, and this may result in the vehicle not being
able to start.

2-2. Driving procedures

151

Driving the v

ehicle

Changing the shift position

WARNING

●

Do not let the vehicle roll backward while a forward driving position is selected, or roll
forward while the shift position is in R.
Doing so may result in an accident or damage to the vehicle.

●

Do not shift the shift position to P while the vehicle is moving. Doing so can damage
the transmission and may result in a loss of vehicle control.

●

Do not shift the shift position to R while the vehicle is moving forward. Doing so can
damage the transmission and may result in a loss of vehicle control.

●

Do not shift the shift position to a driving position while the vehicle is moving back-
ward. Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Changing the shift position to N while the vehicle is moving will disengage the hybrid
system. Regenerative braking is not available with the hybrid system disengaged.

●

Be careful not to change the shift position with the accelerator pedal depressed.
Changing the shift position to any positions other than P or N may lead to unexpected
rapid acceleration of the vehicle that may cause an accident and result in death or
serious injury. After changing the shift position, make sure to confirm the current shift
position displayed on the shift position indicator inside the meter.

Shift position display and how to change the shift position

Shift lever

Operate the shift lever gently and securely in
the direction of the arrow on the shift position
indicator.
To shift to N , slide the shift lever in the direction
of the arrow and hold it.
Release the shift lever after each shifting opera-
tion to allow it to return to its regular position
(

●

Shifting to S is only possible when the shift posi-
tion is in D.

2-2. Driving procedures

152

When shifting from P to N, D or R, from N, D,
S or R to P, from D or M to R, or from R to D,
ensure that the brake pedal is being depressed
and the vehicle is stationary.

Shift position indicator

Meter display:

The current shift position is illuminated.

Shift lever display:

The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.

P position switch

Fully stop the vehicle and set the parking brake,
and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator shows P.

INFORMATION

■

Changing the shift position in each power switch mode

●

The shift position cannot be changed when the power switch is in ACC or off.

●

When the power switch is in ON, if the "READY" indicator is not illuminated, the shift
position can only be changed to N.

●

When the "READY" indicator is illuminated, the shift position can be changed from P
to D, N, or R.

●

When the "READY" indicator is flashing, the shift position cannot be changed from P
to any other position, even if the shift lever is operated. Operate the shift lever again
after the "READY" indicator changes from flashing to illuminated.

■

Shifting the shift position from P to other positions

●

While depressing the brake pedal firmly, operate the shift lever. If the shift lever is
operated without depressing the brake pedal, the buzzer will sound and the shifting
operation will be disabled.

●

When selecting the shift position, make sure that the shift position has been changed
to the desired position by checking the shift position indicator provided on the
instrument cluster.

2-2. Driving procedures

153

Driving the v

ehicle

●

The shift position cannot be changed from P to S directly.

■

The shift position cannot be changed when

In the following situations, a buzzer will sound to inform you that the shift position cannot
be changed. Use the appropriate operation to attempt to change the shift position again.

●

When attempting to change the shift position from P with the brake pedal not
depressed

●

When attempting to change the shift position from P with the accelerator pedal
depressed

●

When attempting to change the shift position from N while stopped or driving at an
extremely low speed with the brake pedal not depressed

●

When attempting to change the shift position from N while stopped or driving at an
extremely low speed with the accelerator pedal depressed

●

When attempting to change the shift position from P or N to S

●

When the P position switch is pressed while driving
When driving at an extremely low speed, the shift position may change to P.

■

The shift position automatically changes to N when

In the following situations, a buzzer will sound to inform you that the shift position
has been changed to N. Use the appropriate operation to attempt to change the shift
position again.

●

When attempting to change the shift position to R while the vehicle is moving forward
When driving at a low speed, the shift position may change to R.

●

When attempting to change the shift position to D while the vehicle is moving
backward
When driving at a low speed, the shift position may change to D.

●

When attempting to change the shift position from R to S

■

If the N shift position is selected while driving

If the shift lever is moved to N while driving above a certain speed, the shift position will
change to N without holding the shift lever in the N position. In this situation, a buzzer will
sound and a message will be displayed on the multi-information display to inform you that
the shift position has been changed to N.

■

Automatic P position selection function

In the following situations, the shift position is automatically changed to P.

●

When pressing the power switch with the vehicle stopped while the power switch is
in ON and the shift position is in a position other than P (after the shift position has
changed to P, the power switch will turn off )

2-2. Driving procedures

154

●

If the driver’s door is opened and all of the following conditions are met, while the shift
position is in a position other than P

•

The power switch is in ON.

•

The driver is not wearing the seat belt.

•

The brake pedal is not depressed.

To start off the vehicle after the shift position is changed to P, operate the shift lever
again.

●

When the vehicle is stopped after the hybrid system has been stopped in an emergen-
cy while driving.

●

When voltage of the 12-volt battery drops while the shift position is in a position other
than P.

■

If the shift position cannot be shifted from P

There is a possibility that the 12-volt battery is discharged. Check the 12-volt battery in
this situation.

(

→

P.647)

WARNING

■

For the shift lever

●

Do not remove the shift lever knob or use anything but a genuine Lexus shift lever
knob. Also, do not hang anything on the shift lever. Doing so could prevent the shift
lever from returning to position, causing unexpected accidents to occur when the
vehicle is in motion.

●

In order to prevent the shift position from accidentally being changed, do not touch the
shift lever when not using them.

■

P position switch

●

Do not press the P position switch while the vehicle is moving.
If the P position switch is pressed when driving at very low speeds (for example,
directly before stopping the vehicle), the vehicle may stop suddenly when the shift
position switches to P, which could lead to an accident.

●

In order to prevent the shift position from accidentally being changed, do not touch the
P position switch when not using them.

*1 :

When the power switch is pressed while driving at extremely slow speeds, such as

immediately before stopping the vehicle, the shift position may automatically change

to P. Make sure that the vehicle is completely stopped before pressing the power

switch.

2-2. Driving procedures

155

Driving the v

ehicle

NOTICE

■

When exiting the vehicle(driver's seat only)

Check that the shift position indicator shows P and that the parking brake indicator is
illuminated before opening the door and exiting the vehicle.

Keeping the shift position in N without activating the automatic P
position selection function

By performing the following operation, the shift position can be held in N until the
shift position switches to P without activating the automatic P position selection
function.

Operate the shift lever and change the shift position to N when the hybrid
system is operating.

Return the shift lever to its regular position (

●

Operate the shift lever to N and hold it there until the buzzer sounds.

Press the power switch within 5 seconds after the buzzer sounds.

The hybrid system stops with the shift position in N

Make sure to check that the buzzer sounds and "Holding N Push P Switch When
Done" is displayed on the multi-information display.

●

In order to shift to a position other than N, first press the P position switch to change
the shift position to P.

●

Make sure to operate the shift lever with the hybrid system is operating. If the hybrid
system is not operating, it may not be possible to hold the shift position in N.

NOTICE

■

Keeping the shift position in N without activating the automatic P position
selection function

Make sure that the hybrid system is started. If an operation is performed when the
hybrid system is not started, the shift position may change to P.

*2 :

To keep this state, do not operate the power switch. If the power switch is operated

repeatedly, the power switch will turn off after the shift position has automatically

changed to P.

2-2. Driving procedures

156

Starting off

With the brake pedal depressed, shift the shift position to D.

Check that the shift position indicator shows D.

WARNING

Always keep your foot on the brake pedal while stopped with the "READY" indicator
is illuminated. This prevents the vehicle from creeping.

If the parking brake is set, release the parking brake.

If the parking brake is in automatic mode, the parking brake will be released automati-
cally.

Gradually release the brake pedal and gently depress the accelerator pedal to
accelerate the vehicle.

Starting off on an incline

Firmly depress the brake pedal and shift the shift position to D.

The hill-start assist control will be activated.

WARNING

Always keep your foot on the brake pedal while stopped with the "READY" indicator
is illuminated. This prevents the vehicle from creeping.

Set the parking brake.

Release the brake pedal and gently depress the accelerator pedal to acceler-
ate the vehicle.

Release the parking brake.

Related Links

Parking brake operation(P. 165)

2-2. Driving procedures

157

Driving the v

ehicle

Operations when turning left or right or changing lanes

By operating the turn signal lever, the intent of the driver can be shown as follows.

INFORMATION

●

The turn signal lights can be operated when the power switch is in ON.

●

If the indicator flashes faster than usual, check that a light bulb in the front or rear turn
signal lights has not burned out.

Move the lever to position

The right turn signal lights will blink.

Move the lever to position

and release it.

The right hand signals will flash 3 times.

Move the lever to position

and release it.

The left hand signals will flash 3 times.

Move the lever to position

The left turn signal lights will blink.

2-2. Driving procedures

158

Changing the shift range

The shift range can be changed by operating the paddle shift switches. Changing
the shift range enables the level of engine braking force to be selected.

Selecting shift ranges in the D position

To drive using temporary shift range selection, operate the [-] paddle shift switch
with the shift position in D.
The shift range can then be selected by operating the [-] and [+] paddle shift
switches.

Upshift

Downshift

Selected range between D1 and D5 will be displayed on the multi-information
display.
To return to normal D position driving, hold the [+] puddle shift switch for a period
of time or operate the [+] puddle shift switch in the D5 range.

●

Shift ranges and their functions

•

You can choose from 5 levels of engine braking force.

•

A lower shift range will provide greater engine braking force than a shift range. As a
result, the engine speed will increase.

INFORMATION

■

Automatic deactivation of shift range selection in the D position

Shift range selection in the D position will be deactivated in the following situations:

●

When the vehicle comes to a stop

●

If the accelerator pedal is depressed for more than a certain period of time

●

When the shift position is shifted to a position other than D

■

Downshifting restriction warning buzzer

To help ensure safety and driving performance, downshift operations may be restricted.
In some circumstances, downshifting may not be possible even when the paddle shift
switch is operated. (A buzzer will sound twice.)

2-2. Driving procedures

159

Driving the v

ehicle

Selecting shift ranges in the S position

To enter S mode, change the shift position to S.
The shift range can be selected by operating the [-] and [+] paddle shift switches.

Upshift

Downshift

The selected shift range, from S1 to S6, will be displayed on the multi-information
display.
The initial shift range in S mode is set automatically to S4.

●

Shift ranges and their functions

•

You can choose from 6 levels of accelerating force and engine braking force.

•

A lower shift range will provide greater accelerating force and engine braking force
than a higher shift range, and the engine revolutions will also increase.

INFORMATION

■

S mode

●

To prevent the engine from over-revving, upshifting may automatically occur when the
shift range is S3 or lower.

●

When in S4 or lower, if the paddle shift switch is held toward [+] the shift range will be
set to S6.

■

Downshifting restriction warning buzzer

■

If the "S" indicator does not come on or the "D" indicator is displayed even after
changing the shift position to S position

This may indicate a malfunction in the hybrid transmission system. Have the vehicle
inspected by your Lexus dealer immediately. (In this situation, the hybrid transmission will
operate in the same manner as when the shift position is in D.)

2-2. Driving procedures

160

Parking the vehicle

When parking the vehicle

Precautions for when the vehicle is stopped or parked

WARNING

■

When the vehicle is parked

●

Always apply the parking brake, shift the shift position to P, stop the hybrid system and
lock the vehicle. Do not leave the vehicle unattended while the "READY" indicator is
illuminated.
If the vehicle is parked with the shift position in P but the parking brake is not set, the
vehicle may start to move, possibly leading to an accident.

●

Never leave a child unattended in the vehicle. A child may accidentally release the
parking brake and the vehicle may move, possibly leading to an accident.

●

Do not leave glasses, cigarette lighters, spray cans or carbonated drink cans in the
vehicle when it is parked in the sun. If left in the vehicle, the following may occur:

•

Gas may leak from a cigarette lighter or spray can, and may lead to a fire.

•

The temperature inside the vehicle may cause the plastic lenses and plastic material
of glasses to deform or crack.

•

Soft drink cans may explode, dirtying the interior and possibly causing a short in
electronic components.

●

Do not store cigarette lighters in the vehicle storage features or leave them inside the
vehicle.
When luggage is loaded or a seat is adjusted, a lighter may be unintentionally lit,
possibly leading to a fire.

●

Do not attach suction cups to the glass parts of the vehicle. Also, do not place air
fresheners or other clear containers on the instrument panel or dashboard. Suction
cups and clear containers may act as a lens, possibly leading to a fire inside the vehicle.

●

Do not leave a door or window open if the curved glass is coated with a metallized film
such as a silver-colored one.
Reflected sunlight may cause the glass to act as a lens, causing a fire.

●

Do not touch the exhaust pipes while the "READY" indicator is illuminated or immedi-
ately after turning the hybrid system off. Doing so may cause burns.

■

When taking a nap in the vehicle

Always turn the hybrid system off. If the "READY" indicator remains illuminated while
taking a nap, you may unintentionally operate the shift lever or accelerator pedal, possibly
leading to an accident or a fire from the hybrid system overheating. Additionally, if the
vehicle is parked in a poorly ventilated area, exhaust gases may accumulate and enter the
vehicle.

2-3. Parking the vehicle

161

Driving the v

ehicle

Exhaust gas precautions

Harmful substance to the human body is contained in exhaust gases if inhaled.

WARNING

Exhaust gases contain harmful carbon monoxide (CO), which is colorless and odorless.
Observe the following precautions.
Failure to do so may cause exhaust gases to enter the vehicle. This may cause light-head-
edness, possibly leading to an accident, death or a serious health hazard.

●

Keep the back door closed while driving.
If you smell exhaust gases in the vehicle even when the back door is closed, open the
windows and have the vehicle inspected by your Lexus dealer as soon as possible.

●

If the vehicle is in a poorly ventilated area or a closed area, such as a garage, stop the
hybrid system.

●

Do not leave the vehicle with the hybrid system on for a long time. If such a situation
cannot be avoided, park the vehicle in an open space and ensure that exhaust fumes
do not enter the vehicle interior.

●

Do not leave the hybrid system operating in an area with snow build-up, or where
it is snowing. If snowbanks build up around the vehicle while the hybrid system is
operating, exhaust gases may collect and enter the vehicle.

●

The exhaust system needs to be checked periodically. Check for the following. If any
are found, have the vehicle inspected by your Lexus dealer.

•

Holes or cracks in the exhaust pipes due to corrosion

•

Damage at the joining parts of the exhaust pipes

•

Abnormal noise from the exhaust

2-3. Parking the vehicle

162

Stopping

Depress the brake pedal.

WARNING

●

Drive more carefully than normal when the brakes are wet. When the brakes are
wet, the braking distance will increase. Also, the brakes will be difficult to apply
and, depending on the situation, braking performance may differ between the left
and right sides. Additionally, the parking brake may not be able to be securely
applied.

●

If the electronically controlled brake system does not operate, do not follow other
vehicles closely and avoid hills or sharp turns that require braking. In this case,
braking is still possible, but the brake pedal should be depressed more firmly than
usual. Also, the braking distance will increase. Have your brakes fixed immediately.

●

If the brake hydraulic system malfunctions, have it repaired immediately. The brake
system consists of 2 or more independent systems and if 1 hydraulic system fails,
the other systems will operate. In this situation, it will be necessary to depress the
brake pedal more than normal and braking distance will be increased.

NOTICE

Do not use the accelerator pedal or depress the accelerator and brake pedals at the
same time to hold the vehicle on a hill.

If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the shift position to P.

WARNING

■

When the vehicle is stopped

●

Do not depress the accelerator pedal unnecessarily.
If the vehicle is in any gear other than P or N, the vehicle may accelerate suddenly
and unexpectedly, causing an accident.

●

In order to prevent accidents due to the vehicle rolling away, always keep depress-
ing the brake pedal while stopped with the "READY" indicator is illuminated, and
apply the parking brake as necessary.

●

If the vehicle is stopped on an incline, in order to prevent accidents caused by the
vehicle rolling forward or backward, always depress the brake pedal and securely
apply the parking brake as needed.

●

Avoid revving or racing the engine. Running the engine at high speed while the
vehicle is stopped may cause the exhaust system to overheat, which could result in
a fire if combustible material is nearby.

2-3. Parking the vehicle

163

Driving the v

ehicle

Parking the vehicle

Depress the brake pedal to stop the vehicle completely.

If the parking brake is released, set the parking brake.

Shift the shift position to P.

Check that the shift position indicator shows P and the parking brake indicator is
illuminated.

WARNING

Always set the parking brake, and shift the shift position to P. Failure to do so may
cause the vehicle to move or the vehicle may accelerate suddenly if the accelerator
pedal is accidentally depressed.

Press the power switch to stop the hybrid system.

Slowly release the brake pedal.

Lock the door, making sure that you have the electronic key on your person.

If parking on a hill, block the wheels as needed.

WARNING

■

When the vehicle is parked

●

Always apply the parking brake, shift the shift position to P, stop the hybrid system
and lock the vehicle. Do not leave the vehicle unattended while the "READY"
indicator is illuminated.
If the vehicle is parked with the shift position in P but the parking brake is not set,
the vehicle may start to move, possibly leading to an accident.

Parking brake operation

The parking brake can be set or released automatically (automatic mode) or
manually (manual mode). In automatic mode, the parking brake is set or released
automatically according to the the shift position operation. Also, even in automatic
mode the parking brake can be set or released manually.

2-3. Parking the vehicle

165

Driving the v

ehicle

WARNING

■

When parking the vehicle

Do not leave a child in the vehicle alone. The parking brake may be released unintention-
ally by a child and there is the danger of the vehicle moving that may lead to an accident
resulting in death or serious injury.

■

Parking brake switch

Do not set any objects near the parking brake switch. Objects may interfere with the
switch and may lead the parking brake to unexpectedly operate.

■

Parking brake automatic lock function

Never use the automatic parking brake engagement function in place of normal parking
brake operation.
This function is designed to reduce the risk of a collision due to the driver forgetting to
engage the parking brake.
Over-reliance on this function to park the vehicle safely may lead to an accident resulting
in death or serious injury.

NOTICE

■

When parking the vehicle

Before you leave the vehicle, shift the shift position to P, set the parking brake and make
sure that the vehicle does not move.

■

When the system malfunctions

Stop the vehicle in a safe place and check the warning messages.

■

When the vehicle 12-volt battery is discharged

The parking brake system cannot be activated.

■

When the parking brake cannot be released due to a malfunction

Driving the vehicle with the parking brake set will lead to brake components overheating,
which may affect braking performance and increase brake wear. Have the vehicle
inspected by your Lexus dealer immediately if this occurs.

INFORMATION

■

Parking brake automatic release function

When all of the following conditions are met, the parking brake can be released by
depressing the accelerator pedal.

●

The driver’s door is closed

●

The driver is wearing the seat belt

2-3. Parking the vehicle

166

●

The shift position is in a forward driving position or reverse driving position

●

The malfunction indicator lamp or brake system warning light is not illuminated

When depressing the accelerator pedal, depress it slowly. If the parking brake is not
released when the accelerator pedal is depressed, release the parking brake manually.
Automatic mode: When the shift position is shifted from P, the parking brake will be
released automatically.

■

Parking brake automatic lock function

The parking brake will be set automatically under the following conditions:

●

The brake pedal is not depressed

●

The driver’s door is open

●

The driver’s seat belt is not fastened

●

The shift position is in a position other than P or N

（

The shift position is in P during advanced park operation

●

The malfunction indicator lamp and brake system warning light are not illuminated

■

Parking brake operation sound

When the parking brake operates, a motor sound (whirring sound) may be heard. This
does not indicate a malfunction.

■

Parking brake indicator light

●

Depending on the power switch mode, the parking brake indicator light will turn on
and stay on as described below:
ON: Comes on until the parking brake is released.
Not in ON: Stays on for approximately 15 seconds.

●

When the power switch is turned off with the parking brake set, the parking brake
indicator light will stay on for about 15 seconds. This does not indicate a malfunction.

■

When the parking brake switch malfunctions

Automatic mode (automatic brake setting and releasing) will be turned on automatically.

■

Parking brake engaged warning buzzer

A buzzer will sound if the vehicle is driven with the parking brake engaged. "Parking
Brake ON" is displayed on the multi-information display (with the vehicle reaching a
speed of 3 mph [5 km/h]).

* :

If equipped

2-3. Parking the vehicle

167

Driving the v

ehicle

Automatic applying/releasing of the parking brake (auto mode)

While the vehicle is stopped, pull and hold the parking brake switch until a buzzer
sounds and a message is shown on the multi-information display.
When the automatic mode is turned on, the parking brake operates as follows.

●

When the shift position is shifted from P, the parking brake will be released, and
the parking brake indicator light will turn off.

●

When the shift position is shifted to P, the parking brake will be set, and the
parking brake indicator light will turn on.

Operate the shift position and P position switch with the vehicle stopped and the
brake pedal depressed.
The auto function may not operate if the shift lever is moved extremely quickly or
the brake pedal is not firmly depressed. In this situation, apply the parking brake
manually.
While the vehicle is stopped and depressing the brake pedal, press and hold
the parking brake switch until a buzzer sounds and a message is shown on the
multi-information display. Automatic mode will be turned off.

INFORMATION

■

Parking brake operation

●

When the power switch is not in ON, the parking brake cannot be released using the
parking brake switch.

●

When the power switch is not in ON, automatic mode (automatic brake setting and
releasing) is not available.

Manual applying/releasing of the parking brake (manual mode)

The parking brake can be set and released manually.

2-3. Parking the vehicle

168

Parking brake indicator (U.S.A.)

Parking brake indicator (Canada)

Pull the switch to set the parking brake.

The parking brake indicator light will turn on.
Pull and hold the parking brake switch if an emergency occurs and it is necessary to
operate the parking brake while driving.

Press the switch to release the parking brake.

●

Operate the parking brake switch while depressing the brake pedal.

●

Using the parking brake automatic release function, the parking brake can
be released by depressing the accelerator pedal.
When using this function, slowly depress the accelerator pedal.

Make sure that the parking brake indicator light turn off.
If the parking brake indicator light flash, operate the switch again.

Garage door opener and its performance

The garage door opener can be programmed using the HomeLink

to operate

garage doors, gates, entry doors, door locks, home lighting systems, security
systems, and other devices.

INFORMATION

■

HomeLink

programming procedure

The programming procedures can also be found at the following URL.

2-3. Parking the vehicle

169

Driving the v

ehicle

Website:

www.homelink.com/lexus

For support, contact customer support at the follow-
ing.
Help Line: 1-800-355-3515

System components

The HomeLink

wireless control system in your vehicle has 3 buttons which can

be programmed to operate 3 different devices.

▶

Vehicles with auto anti-glare inside rear view mirror

HomeLink

indicator light

Garage door operation indicators

HomeLink

icon

Illuminates while HomeLink

is operating.

Buttons

▶

Vehicles with Digital Rearview Mirror

HomeLink

logo

Appears while HomeLink

is operating. When

the menu button is pressed, the logo disappears
even while the HomeLink

is operating.

Garage door operation indicators

HomeLink

indicator lights

Illuminates above each button selected.

Buttons

WARNING

Do not use the HomeLink

compatible transceiver with any garage door opener or

device that lacks safety stop and reverse features as required by federal safety standards.
This includes any garage door that cannot detect an interfering object. A door or device
without these features increases the risk of death or serious injury.

2-3. Parking the vehicle

170

INFORMATION

■

Codes stored in the HomeLink

memory

●

The registered codes are not erased even if the 12-volt battery cable is disconnected.

●

If learning fails when registering a code to a previously registered HomeLink

button,

the registered code will not be erased.

Program the HomeLink

Before programming the HomeLink

, perform the following:

●

During programming, it is possible that garage doors, gates, or other devices
may operate. For this reason, make sure that people and objects are clear of the
garage door or other devices to prevent injury or other potential harm.

●

It is recommended that a new battery be placed in the remote control transmit-
ter for more accurate programming.

The battery side of the transmitter must be pointed away from the HomeLink

buttons.

●

Garage door opener motors manufactured after 1995 may be equipped with
rolling code protection. If this is the case, you may need a stepladder or other
sturdy, safe device to reach the “learn” or “smart” button on the garage door
opener motor.

WARNING

●

The garage door or other device may operate, so ensure people and objects are out
of danger to prevent potential harm.

●

Never allow a child to operate or play with the HomeLink

buttons.

Steps

through

must be performed within 60 seconds. Otherwise the indicator

light will stop flashing and programming will not be able to be completed.

Press and release the HomeLink

button you want to program and check that

the HomeLink

indicator light flashes orange.

2-3. Parking the vehicle

171

Driving the v

ehicle

Point the remote control transmitter for the
device at the rear view mirror, 1 to 3 in. (25 to
75 mm) from the HomeLink

buttons.

Keep the HomeLink

indicator light in view while

programming.

Program a device.

●

Programming a device other than an entry gate (for U.S.A. owners):

▶

Vehicles with auto anti-glare

inside rear view mirror

▶

Vehicles with Digital Rearview

Mirror

▶

Vehicles with auto anti-glare

inside rear view mirror

▶

Vehicles with Digital Rearview

Mirror

2-3. Parking the vehicle

172

Press and hold the remote control transmitter button until the HomeLink

indicator

light changes from slowly flashing orange to rapidly flashing green (rolling code) or
continuously lit green (fixed code), then release the button.

●

Programming an entry gate (for U.S.A. owners)/Programming a device in the
Canadian market:
Press and release the remote control transmitter button at 2 second intervals, re-
peatedly, until the HomeLink

indicator light changes from slowly flashing (orange)

to rapidly flashing (green) (rolling code) or continuously lit (green) (fixed code).

Test the HomeLink

operation by pressing the newly programmed button and

observing the indicator light:

●

HomeLink

indicator light illuminates: Programming of a fixed code device has

completed. The garage door or other device should operate when a HomeLink

button is pressed and released.

●

HomeLink

indicator light flashes rapidly: The garage door opener motor or other

device is equipped with a rolling code. To complete programming, firmly press and
hold the HomeLink

button for 2 seconds then release it.

●

If the garage door or other device does not operate, proceed to

Repeat the steps above to program another device for any of the remaining
HomeLink

buttons.

Programming a rolling code system

Two or more people may be necessary to complete rolling code programming.

Locate the “Learn” or “Smart” button on the
garage door opener motor in the garage.

This button can usually be found where the hang-
ing antenna wire is attached to the unit. The name
and color of the button may vary by manufacturer.
Refer to the owner's manual supplied with the
garage door opener motor for details.

Press and release the “Learn” or “Smart” but-
ton.

Perform

within 30 seconds after performing

2-3. Parking the vehicle

173

Driving the v

ehicle

Press and hold the desired HomeLink

but-

ton (inside the vehicle) for 2 seconds and re-
lease it. Repeat this sequence (press/hold/
release) up to 3 times to complete program-
ming.

If the garage door opener motor operates when
the HomeLink

button is pressed, the garage

door opener motor recognizes the HomeLink

signal.

2-way communication with a garage door and its performance

When enabled, 2-way communication allows you to check the status of the open-
ing and closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used is a
compatible device.
To check device compatibility, refer to

www.HomeLink.com

Enable 2-way communication with a garage door

Within 5 seconds after programming the garage door opener has been com-
pleted, if the garage door opener motor is trained to HomeLink

, both garage

door operation indicators will flash rapidly green and the light on the garage
door opener motor will blink twice, indicating that 2-way communication is
enabled.

If the indicators do not flash, perform

and

within the first 10 presses of the

HomeLink

button after programming has been completed.

Press a programmed HomeLink

button to operate a garage door.

Within 1 minute of pressing the HomeLink

button, after the garage door

operation has stopped, press the “Learn” or “Smart” button on the garage door
opener motor.

▶

Vehicles with auto anti-glare

inside rear view mirror

▶

Vehicles with Digital Rearview

Mirror

2-3. Parking the vehicle

174

Within 5 seconds of the establishment of 2-way communication, both garage door
operation indicators will flash rapidly in green. Additionally, the light on the garage door
opener motor will blink twice, indicating that 2-way communication is enabled.

Operate the HomeLink

This function is only available if the garage door opener motor used is a compatible
device. To check device compatibility, refer to

www.HomeLink.com

▶

Vehicles with auto anti-glare inside rear view mirror

Opening

Closing

▶

Vehicles with Digital Rearview Mirror

Opening

Closing

Press the appropriate HomeLink

button.

The HomeLink

indicator light will turn on. The status

of the opening and closing of a garage door is shown
by the indicators as follows.

●

Orange (flashing): Currently opening/closing

●

Green: Opening/closing has completed

●

Red (flashing): Feedback signals cannot be received

INFORMATION

●

The indicators can operate within approximately 820 ft. (250 m) of the garage door.
However, if there are obstructions between the garage door and the vehicle, such as
houses and trees, feedback signals from the garage door may not be received.

●

To recall the previous door operation status, press and release either HomeLink

buttons

and

(vehicles with auto anti-glare inside rear

view mirror),

and

(vehicles with Digital Rearview Mirror),

simultaneously.
The last recorded status will be displayed for 3 seconds.

2-3. Parking the vehicle

175

Driving the v

ehicle

Reprogram the HomeLink

When the following procedure is performed, buttons which already have devices
registered to them can be overwritten:

Press and hold the desired HomeLink

button.

When the HomeLink® indicator starts flashing orange, release the Home-
Link

button.

Press and release the HomeLink

button you want to program and check that

the HomeLink

indicator light flashes orange.

It takes 20 seconds for the HomeLink

indicator to start flashing.

Erase the entire HomeLink

memory

When selling your vehicle, be sure to erase the registered codes from the Home-
Link

memory.

Press and hold the 2 outer HomeLink

buttons

for 10 seconds. Check that the HomeLink

indi-

cator light changes from continuously lit in or-
ange to rapidly flashing in green.
All codes registered to memory will be erased.

▶

Vehicles with auto anti-

glare inside rear view mirror

▶

Vehicles with Digital Rear-

view Mirror

2-3. Parking the vehicle

176

Refueling

INFORMATION

■

Running out of fuel

When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the
vehicle with at least enough gasoline to make the low fuel level warning light go off.

there is only a small amount of fuel, the hybrid system may not be able to start.

Opening the fuel tank cap

The fuel tank of your vehicle has a special structure, which requires a reduction in
fuel tank pressure before refueling. After the opener switch has been pressed, it
will take several seconds until the vehicle is ready for refueling.

Press the opener to open the fuel filler door.

The fuel filler door will open within about 10 sec-
onds of the switch being pressed. Before refueling
is possible, a message will be shown on the mul-
ti-information display in the instrument cluster to
indicate the progress of the fuel filler door opener.
The fuel filler door will open.

Turn the fuel tank cap slowly and remove it,
then put it into the holder on the fuel filler
door.

WARNING

Always hold the grips on the fuel tank cap and turn it slowly to remove it. A
whooshing sound may be heard when the fuel tank cap is loosened. Wait until the
sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel
may spray out the filler neck and cause injury.

Precautions for refueling

Make sure to select a compatible type of fuel and refuel safely.

*1 :

The specified refueling volume to cause the warning light to turn off when the vehicle

is level is approximately 2.6 gal. [10.0 L, 2.2 Imp.gal.]. This value may vary when the

vehicle is on a slope. Add extra fuel when the vehicle is inclined.

2-4. Refueling

177

Driving the v

ehicle

WARNING

Observe the following precautions while refueling the vehicle.

●

After exiting the vehicle and before opening the fuel door, touch an unpainted metal
surface to discharge any static electricity.
Also, do not allow anyone that has not discharged static electricity from their body to
come close to the fuel filler door.
Sparks resulting from static electricity discharge may cause fuel vapors to ignite while
refueling.

●

Do not inhale vaporized fuel. Fuel contains substances that are harmful if inhaled.

●

Do not smoke while refueling the vehicle. Doing so may cause the fuel to ignite and
cause a fire.

●

Do not return to the vehicle or touch any person or object that is statically charged.
This may cause static electricity to build up, resulting in a possible ignition hazard.

●

Securely insert the fuel nozzle into the fuel filler neck.

●

Stop filling the tank after the fuel nozzle automatically clicks off.

●

Do not top off the fuel tank.

NOTICE

●

Make sure that the fuel filler door lock is not push-
ed by the fuel nozzle boot, etc. If the lock is held,
the internal valve closes and fuel may overflow.
To prevent it, operate the fuel filler door opener
switch in the vehicle again.

●

Finish refueling within 30 minutes. If more than 30 minutes passes, the internal valve
closes. In this condition, fuel may overflow during the refueling process. Press the fuel
filler door opener switch again.

●

Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing
the emission control system to operate abnormally or damaging fuel system compo-
nents or the vehicle’s painted surface.

INFORMATION

■

Fuel tank opening for unleaded gasoline

To help prevent refueling with the incorrect fuel, your vehicle has a fuel tank opening
designed to only accommodate the special nozzle on unleaded fuel pumps.

2-4. Refueling

178

Close the fuel tank cap

After refueling, turn the fuel tank cap until you
hear a click.

Once the cap is released, it will turn slightly in the
opposite direction.

WARNING

If replacing the fuel tank cap, do not use anything but a genuine Lexus fuel tank cap
designed for your vehicle. Doing so may cause a fire.

INFORMATION

■

When "Check Fuel Cap" is displayed on the multi-information display

The fuel tank cap may be unfastened or loose. Turn the power switch off, check the cap
and tighten it securely. If the message remains, wait a few seconds and then turn the
power switch off once again.

2-4. Refueling

179

Driving the v

ehicle

Driving when the surrounding area is dark

Using the headlights

The headlights can be operated manually or automatically.

Related Links

Customizable features(P. 751)

Turning the headlights on/off

Do not leave the lights on longer than necessary with the hybrid system off. Doing
so may lead to discharge of the 12-volt battery.

Operating the

switch turns on the lights as follows:

▶

Type A

The side marker, parking, tail, license

plate, instrument panel lights, and daytime
running lights turn on.

The headlights and all the lights listed

above (except daytime running lights) turn
on.

The headlights, daytime running lights

and all the lights listed above turn on and off
automatically.

The daytime running lights turn off.

3-1. Driving when the surrounding area is dark

182

Lexus NX350h (2024 year). Manual in english - page 5