|
|
|
- 109 - Machinery Management I Management and Usage of New Machine New machine leave factory after sophisticated inspection and test run. However, it shall have enough running-in before usage, which is the know-how of long-term maintaining machine in a well-state and economic usage. Please take heed of the following items when using new machine: No matter what season, enough warming-up shall be done before working. Be sure to avoid the engine work in idling (non-load high-speed operation). It must not do like that especially not heating the engine. Be sure to avoid emergency brake, flashback and unnecessary spike stop.
II Storage of the Machine 2.1 No Use for One Month In addition to the attention of stop at ordinary time, the following items shall be implemented for the machine of non-use of a month: Brake the machine for every week, and operate the working device to use at any time. 2.2 No Use for over One Month In addition to the attention of stop at ordinary time, the following items shall be implemented for the machine of non-use of over a month: Check oil point of each part to see whether it has oil with specified volume. Park at hard-surface road at high position taking into account such as the rainy season. Take out the accumulator. Even parking inside the house, the accumulator shall be kept in other dry place for the summer heat or humid area, and be charged for every month. Smear the anti-corrosive grease on the bare part of easily rusty hardware such as piston rod. Cover with clothes at the humidity area (venting device, air filter). Tyre pressure shall be adjusted to the standard pressure and check the abrasion and damage of tyre. (Prepare new tyre according to the check result). In order to remove the burden of tyre load, float it by jacking up the machine. |