Military reference books and manuals (2009-2023, Volume 7)

STP 34-96U14-SM-TG

301-96U-1126H

DISPLACE AN UNMANNED AERIAL VEHICLE (UAV) LAUNCH RECOVERY TERMINAL

(LRT) (HUNTER)

Conditions: Given an emplaced launch recovery terminal (LRT), associated equipment, and

TM 9-1425-691-10.

Standards: Displace an unmanned aerial vehicle (UAV) LRT in accordance with TM 9-1425-

691-10.

Performance Steps

1. Perform steps as indicated in TM 9-1425-691-10, chapter 3, section I, paragraph 3-1 B.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-1425-691-10,

——

chapter 3, section I, paragraph 3-1 B.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

3-64

MOS/Skill Level Tasks-Skill Level 1

301-96U-1127S

DISPLACE AN UNMANNED AERIAL VEHICLE (UAV) LAUNCHER (LAU) (SHADOW)

Conditions: Given an emplaced launcher (LAU), associated equipment, personal protective

equipment (PPE), and TM 9-5895-681-CL.

Standards: Displace an unmanned aerial vehicle (UAV) LAU in accordance with TM 9-5895-

681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10, work package (WP) 0118 00, or TM -

5895-681-CL.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10,

——

WP 0118 00, or TM 9-5895-681-CL.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-CL

3-65

STP 34-96U14-SM-TG

301-96U-1128S

DISPLACE AN UNMANNED AERIAL VEHICLE (UAV) TACTICAL AUTOMATED LANDING

SYSTEM (TALS) (SHADOW)

Conditions: Given an emplaced tactical automated landing system (TALS), associated

equipment and TM 9-5895-681-CL.

Standards: Displace an unmanned aerial vehicle (UAV) TALS in accordance with TM 9-5895-

681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10, work package (WP) 0119 00, or

TM 9-5895-681-CL.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10,

——

WP 0119 00, or TM 9-5895-681-CL.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-CL

3-66

MOS/Skill Level Tasks-Skill Level 1

301-96U-1129S

DISPLACE UNMANNED AERIAL VEHICLE (UAV) ARRESTING GEAR (AG) (SHADOW)

Conditions: Given emplaced arresting gear (AG), associated equipment, personal protective

equipment (PPE), and TM 9-5895-681-CL.

Standards: Displace an unmanned aerial vehicle (UAV) AG in accordance with TM 9-5895-

681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10, work packages (WPs): 0120 00 and

WP 0120 01, or TM 9-5895-681-CL.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10,

——

WP 0120 00 and WP 0120 01, or TM 9-5895-681-CL.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-CL

3-67

STP 34-96U14-SM-TG

301-96U-1130H

DISPLACE UNMANNED AERIAL VEHICLE (UAV) FLIGHT LINE SUPPORT EQUIPMENT

(HUNTER)

Conditions: Given an order to move, ground support vehicles, associated equipment, support

personnel, TM 9-1425-691-10, TM 9-5895-692-10-1, TM 9-5895-692-10-2, and TM 9-5895-692-

CL.

Standards: Prepare system ground transport vehicles for movement in accordance with

procedures in TM 9-1425-691-10, TM 9-5895-692-10-1, TM 9-5895-692-10-2, and TM 9-5895-

692-CL without causing damage to equipment, injury to personnel, or safety violations.

Performance Steps

1. Perform steps as indicated in TM 9-1425-691-10, chapter 3, section I, paragraphs: 3-1 C,

3-1 D, and 3-1 F.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-1425-691-10,

——

chapter 3, section I, paragraphs: 3-1 C, 3-1 D, and 3-1 F.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

TM 9-1425-697-13

3-68

MOS/Skill Level Tasks-Skill Level 1

301-96U-1131H

DISPLACE UNMANNED AERIAL VEHICLE (UAV) MOBILE MAINTENANCE FACILITY

(MMF) (HUNTER)

Conditions: Given emplaced flight line support equipment, support personnel, and TM 9-1425-

691-10.

Standards: Displace UAV flight line support equipment in accordance with TM 9-1425-691-10.

Performance Steps

1. Perform steps as indicated in TM 9-1425-697-13, chapter 2, section III, paragraphs: 2-9 and

2-10.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-1425-697-13,

——

chapter 2, section III, paragraphs: 2-9 and 2-10.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

TM 9-1425-697-13

3-69

STP 34-96U14-SM-TG

301-96U-1132

DISPLACE AN UNMANNED AERIAL VEHICLE (UAV) REMOTE VIDEO TERMINAL (RVT)

Conditions: Given an emplaced remote video terminal (RVT), associated equipment and

TM 9-5895-681-CL (Shadow) or TM 9-5895-696-13 (Hunter).

Standards: Displace an unmanned aerial vehicle (UAV) RVT in accordance with TM 9-5895-

681-10 (Shadow) or TM 9-5895-696-13 (Hunter).

Performance Steps

1. Displace Hunter RVT. Perform steps as indicated in TM 9-5895-696-13, chapter 2,

section III, paragraphs: 2-9 and 2-10.

2. Displace Shadow RVT. Perform steps as indicated in TM 9-5895-681-10, work package

(WP) 0116 00, or TM 9-5895-681-CL.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Displaced Hunter RVT. Performed all steps correctly in accordance with

——

TM 9-5895-696-13, chapter 2, section III, paragraphs: 2-9 and 2-10.

2. Displaced Shadow RVT. Performed all steps correctly in accordance with

——

TM 9-5895-681-10, WP 0116 00, or TM 9-5895-681-CL.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-696-13

3-70

MOS/Skill Level Tasks-Skill Level 1

301-96U-1133

DISASSEMBLE AN UNMANNED AERIAL VEHICLE (UAV)

Conditions: Given an assembled unmanned aerial vehicle (UAV), an emplaced air vehicle

transport (AVT) (Shadow), an emplaced storage container (Hunter), associated equipment,

soldiers to assist and TM 9-5895-681-CL.

Standards: Disassemble a UAV in accordance with TM 9-5895-681-10 (Shadow) or

TM 9-1425-691-10 (Hunter).

Performance Steps

1. Disassemble Hunter UAV. Perform steps as indicated in TM 9-1425-691-10, chapter 3,

section III, paragraph 3-3.

2. Disassemble Shadow UAV. Perform steps as indicated in TM 9-5895-681-10, work package

(WP) 0111 00, or TM 9-5895-681-CL.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Disassemble Hunter UAV. Performed all steps correctly in accordance with

——

TM 9-1425-691-10, chapter 3, section III, paragraph 3-3.

2. Disassembled Shadow UAV. Performed all steps correctly in accordance

——

with TM 9-5895-681-10, WP 0111 00, or TM 9-5895-681-CL.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

TM 9-5895-681-10

TM 9-5895-681-CL

3-71

STP 34-96U14-SM-TG

Subject Area 4: MAINTENANCE

301-96U-1213S

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON

UNMANNED AERIAL VEHICLE (UAV) ELECTICAL POWER EQUIPMENT (EPE) (SHADOW)

Conditions: Given electrical power equipment (EPE), logbook, associated forms, appropriate

tools and supplies, personal protective equipment (PPE), and TM 9-5895-681-10.

Standards: Perform preventive maintenance checks and services (PMCS) on unmanned aerial

vehicle (UAV) EPE in accordance with TM 9-5895-681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10, work packages (WPs): 0151 00 and

WP 0152 00.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10,

——

WP 0151 00 and WP 0152 00.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-20

TM 9-5895-681-CL

3-72

MOS/Skill Level Tasks-Skill Level 1

301-96U-1214H

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) MOBILE POWER UNIT (MPU) (HUNTER)

Conditions: Given a mobile power unit (MPU), logbook, associated forms, appropriate tools

and supplies, personal protective equipment (PPE), TM 9-6115-642-10, and TM 9-1425-691-10.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) MPU in accordance with TM 9-6115-642-10 and TM 9-1425-691-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraphs: 8-1,

8-2, 8-3, and table 8-1.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-692-10-2,

——

chapter 8, section I, paragraphs: 8-1, 8-2, 8-3, and table 8-1.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

3-73

STP 34-96U14-SM-TG

301-96U-1215

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) GROUND CONTROL STATION (GCS)

Conditions: Given a ground control station (GCS), logbook, associated forms, appropriate tools

and supplies, personal protective equipment (PPE), and TM 9-5895-681-10 (Shadow) or

TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Standards: Perform preventive maintenance checks and services (PMCS) on unmanned aerial

vehicle (UAV) GCS in accordance with TM 9-5895-681-10 (Shadow) or TM 9-5895-692-10-1

(Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. For Hunter:

Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraphs: 8-1,

8-2, 8-4, and table 8-2.

2. For Shadow:

Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0143 00.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. For Hunter:

——

Performed all steps correctly in accordance with TM 9-5895-692-10-2,

chapter 8, section I, paragraphs: 8-1, 8-2, 8-4, and table 8-2.

2. For Shadow:

——

Performed all steps correctly in accordance with TM 9-5895-681-10 and

WP 0143 00.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

3-74

MOS/Skill Level Tasks-Skill Level 1

301-96U-1216S

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) PORTABLE GROUND CONTROL STATION (PGCS)

(SHADOW)

Conditions: Given a portable ground control station (PGCS), logbook, associated forms,

appropriate tools and supplies, personal protective equipment (PPE), and TM 9-5895-681-10.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) PGCS in accordance with TM 9-5895-681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0143 02.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10 and

——

WP 0143 02.

Evaluation Guidance Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-20

TM 9-5895-681-CL

3-75

STP 34-96U14-SM-TG

301-96U-1218

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) GROUND DATA TERMINAL (GDT)

Conditions: Given a ground data terminal (GDT), logbook, associated forms, appropriate tools

and supplies, personal protective equipment (PPE), and TM 9-5895-681-10 (Shadow) or

TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) GDT in accordance with TM 9-5895-681-10 (Shadow) or TM 9-5895-692-

10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. For Hunter:

Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraphs: 8-1,

8-2, 8-5, and table 8-3.

2. For Shadow:

Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0143 01.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. For Hunter:

——

Performed all steps correctly in accordance with TM 9-5895-692-10-2,

chapter 8, section I, paragraphs: 8-1, 8-2, 8-5, and table 8-3.

2. For Shadow:

——

Performed all steps correctly in accordance with TM 9-5895-681-10 and

WP 0143 01.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

3-76

MOS/Skill Level Tasks-Skill Level 1

301-96U-1219S

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) PORTABLE GROUND DATA TERMINAL (PGDT)

(SHADOW)

Conditions: Given a portable ground data terminal (PGDT), logbook, associated forms,

appropriate tools and supplies, personal protective equipment (PPE), and TM 9-5895-681-10.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) PGDT in accordance with TM 9-5895-681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0143 03.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10 and

——

WP 0143 03.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-20

TM 9-5895-681-CL

3-77

STP 34-96U14-SM-TG

301-96U-1226H

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) LAUNCH AND RECOVERY TERMINAL (LRT)

(HUTNER)

Conditions: Given a launch and recovery terminal (LRT), logbook, associated forms,

appropriate tools and supplies, personal protective equipment (PPE), TM 9-5895-692-10-1, and

TM 9-5895-692-10-2.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) LRT in accordance with TM 9-5895-692-10-1 and TM 9-5895-692-10-2.

Performance Steps

1. Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraphs: 8-1,

8-2, 8-6, and table 8-4.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-692-10-2,

——

chapter 8, section I, paragraphs: 8-1, 8-2, 8-6, and table 8-4.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

3-78

MOS/Skill Level Tasks-Skill Level 1

301-96U-1227S

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) LAUNCHER (LAU) (SHADOW)

Conditions: Given a launcher (LAU), logbook, associated forms, appropriate tools and

supplies, personal protective equipment (PPE), and TM 9-5895-681-10.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) LAU in accordance with TM 9-5895-681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0140 00.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10 and

——

WP 0140 00.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-20

TM 9-5895-681-CL

3-79

STP 34-96U14-SM-TG

301-96U-1228S

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) TACTICAL AUTOMATED LANDING SYSTEM (TALS)

(SHADOW)

Conditions: Given tactical automated landing system (TALS), logbook, associated forms,

appropriate tools and supplies, and TM 9-5895-681-10.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) TALS in accordance with TM 9-5895-681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0141 00.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10 and

——

WP 0141 00.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-20

TM 9-5895-681-CL

3-80

MOS/Skill Level Tasks-Skill Level 1

301-96U-1229S

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON

UNMANNED AERIAL VEHICLE (UAV) ARRESTING GEAR (AG) (SHADOW)

Conditions: Given arresting gear (AG), logbook, associated forms, appropriate tools and

supplies, personal protective equipment (PPE) and TM 9-5895-681-10.

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) AG in accordance with TM 9-5895-681-10.

Performance Steps

1. Perform steps as indicated in TM 9-5895-681-10, work packages (WPs): 0139 00,

WP 0146 00, and WP 0139 00.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-681-10,

——

WP 0139 00, WP 0146 00, and WP 0139 00.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-20

TM 9-5895-681-CL

3-81

STP 34-96U14-SM-TG

301-96U-1230H

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON

UNMANNED AERIAL VEHICLE (UAV) FLIGHT LINE SUPPORT EQUIPMENT (HUNTER)

Conditions: Given air vehicle ground power station, auxiliary generator, arresting gear,

logbooks, associated forms, appropriate tools and supplies, personal protective equipment

(PPE), TM 9-1425-697-13, TM 9-1425-691-10, TM 9-5895-692-10-1, TM 9-5895-692-10-2, and

TM 9-1720-694-23.

Standards: Perform preventive maintenance checks and services (PMCS) on unmanned aerial

vehicle (UAV) flight line support equipment in accordance with TM 9-1425-697-13, TM 9-1425-

691-10, TM 9-5895-692-10-1, TM 9-5895-692-10-2, and TM 9-1720-694-23.

Performance Steps

1. Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraphs: 8-1,

8-2, 8-7, and table 8-5.

2. Perform steps as indicated in TM 9-1425-697-13, chapter 2, section-II, paragraphs: 2-3, 2-4,

2-5, 2-6, and tables: 2-1, 2-2, 2-3, 2-4, 2-5, 2-6.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-692-10-2,

——

chapter 8, section I, paragraphs: 8-1, 8-2, 8-7, and table 8-5.

2. Performed steps as indicated in accordance with TM 9-1425-697-13,

——

chapter 2, section II, paragraphs: 2-3, 2-4, 2-5, 2-6, and tables: 2-1, 2-2,

2-3, 2-4, 2-5, 2-6.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

TM 9-1425-697-13

TM 9-1720-694-23

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

3-82

MOS/Skill Level Tasks-Skill Level 1

301-96U-1232

PERFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) ON AN

UNMANNED AERIAL VEHICLE (UAV) REMOTE VIDEO TERMINAL (RVT)

Conditions: Given a remote video terminal (RVT), logbook, associated forms, appropriate tools

and supplies, and TM 9-5895-681-10 (Shadow) or TM 9-5895-696-13 (Hunter).

Standards: Perform preventive maintenance checks and services (PMCS) on an unmanned

aerial vehicle (UAV) RVT in accordance with TM 9-5895-681-10 (Shadow) or TM 9-5895-696-13

(Hunter).

Performance Steps

1. For Hunter:

Perform steps as indicated in TM 9-5895-696-13, chapter 2, section II, paragraphs: 2-4, 2-5,

2-6, and table 2-1.

2. For Shadow:

Perform steps as indicated in TM 9-5895-681-10 and work package (WP) 0150 00.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. For Hunter:

——

Performed all steps correctly in accordance with TM 9-5895-696-13,

chapter 2, section II, paragraphs: 2-4, 2-5, 2-6, and table 2-1.

2. For Shadow:

——

Performed all steps correctly in accordance with TM 9-5895-681-10 and

WP 0150 00.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-696-13

3-83

STP 34-96U14-SM-TG

301-96U-1234

UPDATE UNMANNED AERIAL VEHICLE (UAV) SYSTEM LOGBOOKS

Conditions: Given logbooks, updated information and associated materials.

Standards: Update unmanned aerial vehicle (UAV) system logbooks in accordance with unit

standing operating procedures (SOPs) and DA Pam 738-751.

Performance Steps

Identification. Identify the aircraft or other equipment to which the logbook belongs by using

the DA Form 2408-31 (Aircraft Identification Card) inserted in the plastic slot on the front of

the binder.

Use DA Form 2408 (Equipment Log Assembly). Utilize DA Form 2408 to obtain information

for operational, mission, duty, flight condition symbols, aircraft condition status symbols, and

maintenance codes to be used on DA Forms 2408-12 (Army Aviator’s Flight Record),

2408-13 (Aircraft Status Information Record), and other related maintenance forms.

Prepare DA Form 2408-12.

Prepare DA Form 2408-12 to record aircraft flying time, duty, and type of flight done by

the pilot and crew.

Make sure that enough copies of DA Form 2408-12 are in the aircraft logbook to do the

assigned mission.

Close out the DA Form 2408-12 after the last flight of the mission day or before the first

flight of the next mission day.

Prepare a new DA Form 2408-12 after the last flight of the mission day or before the first

flight of the next mission day.

Enter all needed flight information for all crew members that were on the flight. The data

entered by the pilot is very important. Data is used for a permanent record of the pilot

and crewmembers career of flying hours and type of missions flown during different flight

conditions. The pilot will also enter operational data, such as landings, engine starts,

and so forth.

A flight or series of flights that takes off before 2400 hours and lands after 2400 hours is

credited to the date of takeoff, unless the flight starts on the last day of the aircraft

materiel condition status and flying time report reporting month. The DA Form 2408-12

will show a close out time of 2400 hours for that last day of the reporting month. Start a

new form and show the flight for the first day of the reporting month as starting at 0001

hours. Enter the time it took for the flight in hours and tenths of an hour in the flight hour

block, as listed in the time conversion table shown on DA Form 2408 in your logbook or

table 1-13 at the end of chapter 1.

After the last flight of the mission day or before the first flight of the next mission day,

close out the DA Form 2408-12, by totaling the flight hours, landings, hour meter hours,

engine starts, and landing gear cycles, in block 8. Enter these totals on the DA Form

2408-13. Prepare a new DA Form 2408-12. Remove the closed out DA Form 2408-12

from the aircraft logbook at the end of the mission day or before the first flight of the next

mission day. Send the closed out form through the maintenance office to the operations

office. When the aircraft is operated away from its home station, the closed out forms

will stay in the logbook until the aircraft returns.

3-84

MOS/Skill Level Tasks-Skill Level 1

Performance Steps

h. Keep the DA Form 2408-12 for 3 months and then destroy it.

Prepare DA Form 2408-13.

Prepare DA Form 2408-13 for aircraft and aircraft training devices. This form is used to

show the present status of the aircraft, aircraft training devices/simulator, maintenance

trainer airframes, and mission related equipment aboard the aircraft, current and hours

flown today, total aircraft hours, number of landings and touchdown auto-rotations during

the report period, sign off daily inspections, and shows when the next scheduled

maintenance inspection is due.

Prepare a new DA Form 2408-13 before the first flight of the mission day. This form can

also be filled out after completion of the daily inspection at the end of the mission day.

Refer to DA Pam 738-751, figure 2-8A, for preparation instructions. Make out additional

forms as needed during the current mission day.

Complete this form whenever a daily inspection or preventive maintenance service

(PMS) is due by using the most current PMD or PMS CL for the type and model aircraft

assigned. Enter all faults found during the inspection on the DA Form 2408-13-1

(Aircraft Maintenance and Inspection Record).

Enter the correct status symbol for the aircraft and the aviation mission related

equipment in block 10, SYSTEM STATUS block(s) that apply. There are thirteen (13)

spaces for SYSTEM STATUS symbols for aircraft and aircraft training devices/flight

simulators and seven (7) spaces for installed mission related equipment for use during

the mission day. If these spaces are filled during a mission day, continue the SYSTEM

STATUS on a new DA Form 2408-13.

Close out after the last flight of the mission, by entering the flight time, landings,

touchdown auto-rotations, and other needed information in the today blocks then add

these to the current aircraft hours, landings, touchdown auto-rotations, and so forth.

Make out a new DA Form 2408-13 and makes sure the correct current data is entered

on the new form.

Remove the closed out DA Form 2408-13 from the aircraft logbook at the end of the

mission day or before the first flight of the next mission day. Send the closed out form to

the maintenance office. When the aircraft is operated away from its home station, the

closed out forms will stay in the logbook until the aircraft returns. During extended time

away from the home station this and other aircraft forms will be removed and filed in the

local maintenance office, but forms will be delivered back to the home station upon

completion of the exercise, combat, or TDY.

Check the aircraft and installed aviation associated equipment condition status, as

shown in the SYSTEM STATUS blocks. The SYSTEM STATUS block must show the

condition status of the most serious uncorrected fault as shown on the DA Form 2408-

13-1, DA Form 2408-13-2 (Related Maintenance Actions Record), or the DA Form 2408-

14 (Uncorrected Fault Record).

Check the DA Form 2408-18 (Equipment Inspection Worksheet) to see if any

inspections, services, or replacements are due or overdue.

Check that fuel and oil have a sufficient amount remaining to complete the assigned

mission.

3-85

STP 34-96U14-SM-TG

Performance Steps

Perform a thorough preflight check/inspection using the most up-to-date checklist for the

type and model aircraft to be flown. Enter all faults found during the check/inspection on

the DA Form 2408-13-1.

k. Enter the date (dd mmm yy) in the date block if the aircraft is safe to fly and can do the

assigned mission.

Perform a thorough thru flight check/inspection per checklist and enter any faults or

remarks on the DA Form 2408-13-1 after landing or at any intermediate stop.

m. Perform a post-flight check/inspection per TM-IOCL and enter any faults or remarks on

the DA Form 2408-13-1 after landing, following the last flight of the mission day.

n. Closed out DA Form 2408-13 along with related test flight worksheets. Remove from the

logbook at the end of the mission day or before the first flight of the next day and send to

the unit maintenance office. Forms closed out, while the aircraft is on a cross-country

flight, will remain in the logbook until the aircraft returns to the home station. When the

aircraft is detached, closed out forms will be turned in to a local maintenance activity.

Forms will be turned in to the maintenance office when the aircraft has returned to the

owning unit. Forms closed out while the aircraft is undergoing extensive inspection,

maintenance, or test flight (to be closed out at the end of the mission day) will remain

available (preferably in the unit maintenance office) for the flight or maintenance crew

until all work is done and the test flight is signed off.

Utilize DA Form 2408-13-1.

a. Utilize DA Form 2408-13-1 to record operational and maintenance operations of aircraft,

aviation associated equipment, and components/modules. This form is used by the pilot,

crew members, crew chiefs, mechanics, quality control, maintenance, and supervisory

personnel to—

(1) Record faults and deficiencies found during operational and maintenance

operations.

(2) Record remarks related to flights and condition of the aircraft.

(3) Record removal and replacement of repair parts, component/module, or assembly

that affect safety of flight of the aircraft.

(4) Record damage in an accident/mishap, battle damage, or damage resulting from a

natural phenomenon such as, wind, rain, water, and so on.

(5) Record contamination or suspected contamination by nuclear, biological, or chemical

agents.

(6) Record all scheduled, unscheduled, and special maintenance inspections, checks,

and services due and completed.

(7) Record condition status symbols upon finding faults on aircraft, aviation associated

equipment, including mission related equipment aboard aircraft.

(8) Record component/module, accessories, and other items due replacement at

specific flying hours, operating hours, rounds fired, calendar time, and so on.

(9) Record uncorrected faults from the DA Form 2408-13-3 (Aircraft Technical

Inspection Worksheet) and deferred faults from the DA Form 2408-14.

(10) Enter all faults found during the preflight checks or inspection. The entries go on the

fault/remark line in the fault information block (see DA Pam 738-751, figure 2-9A).

(11) Enter faults found during flight, through flight, and post flight inspections.

3-86

MOS/Skill Level Tasks-Skill Level 1

Performance Steps

(12) Enter a signature after the fault or remark. The pilot will enter the status symbol in

the status block that he or she feels is suitable for the fault entered and update the

proper SYSTEM STATUS block of DA Form 2408-13 as needed. Only one

fault/remark per fault Information block is allowed.

(13) Prepare a new DA Form 2408-13-1 before the first flight of each mission day.

Additional forms will be prepared as needed during the mission day.

(14) Enter all faults found in the fault information block during the PMD or PMS.

(15) Make entries showing action taken in the correcting information block on the

ACTION line. Other information called for will also be entered in blocks and lines on

this form per DA Pam 738-751, paragraphs 1-7, 1-8, and figure 2-8.

(16) Complete the DA Form 2408-13-1 with other related logbook forms. The competed

forms need not be removed and closed out at the end of the mission day. To

prevent unnecessary reentering of information and faults on a new form every

mission day, DA Form 2408-13-1 can be removed as determined by the unit or

activity commander, but can be left in the logbook until the end of the seventh

mission day’s flying operation. DA Form 2408-13-1 will also be removed after

completion of extensive maintenance, such as intermediate, periodic, phase

maintenance inspections, and maintenance test flights. When this form is removed,

the crew chief will remove the completed forms along with the current

DA Form 2408-12, if any, and DA Form 2408-13 from the logbook as stated above

after reentering needed information to the next mission days logbook forms.

(17) Record maintenance inspections due on the DA form 2408-13-1.

(a) Record a red horizontal dash ‘AA’ in the status block in the fault information block

when the inspection becomes due or when it is started early.

(b) Record a red ‘X’ in the status block in the fault information block when a

scheduled maintenance inspection is not done when due by the flying hour called

for in the appropriate direct support maintenance (-23 level) TM.

or repeat/recurring inspection was not done on the flying hour, or operating hour.

(d) Record the type and number (if it is numbered) of the inspection in the fault

information block and the person making this entry will print his or her PID in the

PID block or signature following the type and number of the inspection.

3-87

STP 34-96U14-SM-TG

Performance Steps

(e) Record the completion of maintenance inspections. When all scheduled

inspection requirements listed in the maintenance inspection checklist and

maintenance related actions and other work are one, enter the word ‘completed’

or a phrase such as ‘Phase 2 completed’, ‘phase inspection completed’, ‘phase

insp comp’, ‘PMS completed’, ‘PMS 2 completed’, ‘inspection completed’, and so

on, on the action line in the correcting information block. If one or more words

describing the correcting information or action taken are used, it will not be

considered an error. Enter the date (dd mmm yy) the work is done and enter

other information called for. If a maintenance test flight or MOC is needed to

complete the inspection, enter a red “X” symbol in the fault information status

block. On the fault/remark line in the fault information block enter test flight or

MOC is needed, reason(s) for test flight/MOC and the PID in the PID block or

signature of the person making the entry. As the test flight or MOC is done, the

word ‘completed’ or a phrase similar to ‘MTF completed’, ‘test flight completed’,

‘MOC completed’, and so forth, will be entered on the action line in the correcting

information block. If one or more words describing the correcting information or

action taken are used, it will not be considered an error. The person performing

the test flight and/or the MOC will initial the status symbol in the status block in

the fault information block.

Note: When a PMD inspection is done after the last flight of the mission day, the

completion of inspection is not needed on the DA Form 2408-13-1. Record this inspection

on the DA Form 2408-13 for the next mission day per DA Pam 738-751, figure 2-7.

b. Remove the completed DA Form 2408-13-1 from the logbook as determined by the unit

or activity commander, but not to exceed the seventh (7^th) mission day’s flying operation.

The removal and close out of the DA Form 2408-13-1 will be done on the selected

mission day or before the first flight of the next mission day and carried to the unit or

activity maintenance office with the related DA Form 2408-12, DA Form 2408-13, and

DA Form 2408-13-2. Those forms filled out while the aircraft is away from its home

station on TDY or a cross-country flight will remain in the logbook until the aircraft

returns to the home station. When the aircraft is detached, completed forms will be

turned in to a local maintenance activity so the logbook will not become too bulky.

These forms are returned to the owning unit/activity maintenance office upon completion

of the detachment.

c. Carry forward the open faults appearing in the fault information blocks to a new DA Form

2408-13-1. The PID or name of the person who made the first entry in the fault

information block need not be carried forward to the new form, or the DA Form 2408-14.

The decision to re-enter a fault to the DA Form 2408-14 to become a deferred fault will

be made by the unit or activity commander, equal management or supervisor in contract

support maintenance, or his or her designated representative.

3-88

MOS/Skill Level Tasks-Skill Level 1

Performance Steps

d. Enter in the fault information block of the new DA Form 2408-13-1 the date (dd mmm yy)

of the DA Form 2408-13-1 on which each fault was first recorded. The fault is entered

exactly as it was originally written. If corrective action is delayed because of lack of

repair parts or some other item of supply or deferred maintenance, the supply requisition

number or the maintenance request number will be printed in the requisition (REQ) or

work order (W.O.) block of the fault information block. Other information called for in this

block, including the date (dd mmm yy) of each fault entry will become part of the entry

when it is carried forward to a new DA Form 2408-13-1 or reentered on the DA Form

2408-14. They stay with the entry until parts or other items of supply are received or

when the fault is corrected.

e. Enter the corrective action on the action line in the correcting information block and enter

his or her PID in the PID block or signature and fill in other called for information in this

block per figure 2-8 when the fault is corrected. The person making the corrective action

will change the aircraft status symbol in the SYSTEM STATUS block of the DA Form

2408-13.

f. Reenter the fault when it is carried forward from another DA Form 2408-13-1 to the fault

information block of the current form. The person will print his or her PID in the PID

block or place signature in the correcting information block after entering ‘C/F’ (carried

forward) in this block.

Prepare DA Form 2408-13-2.

Prepare DA Form 2408-13-2 as a supplement form to DA Form 2408-13-1 and DA Form

2408-13-3 for aircraft and other equipment. This form will be used only to record related

maintenance actions that are necessary while clearing major faults/deficiencies and

conditions written up on the DA Form 2408-13-1 and DA Form 2408-13-3. This form is

also used to show the condition status of each major fault or deficiency on the DA Form

2408-13-1 and DA Form 2408-13-3 and each related maintenance action in the fault

block (block 5).

Use one or more DA Form 2408-13-2 for each major fault listed on the DA Form

2408-13-1 and DA Form 2408-13-3, when one or more related maintenance action is

done.

Record maintenance work hours for each related maintenance task done by each

person doing the work in hours and tenths of an hour.

Update all DA Form 2408-13-2 closely with the DA Form 2408-13-1 and DA Form

2408-13-3 where red ‘X’, circled red ‘X’, or red diagonal faults and deficiencies are listed.

Record all related maintenance actions on the DA Form 2408-13-2 by showing

corrective action and clearing of status symbols per DA Pam 738-751, paragraphs 1-7,

1-8, 1-9, and figure 2-9A.

Do not reenter or carry forward to any other form or record related maintenance actions

since they are not faults and are done to clear a fault.

Ensure quality control inspects the completed DA Form 2408-13-2 for incorrect entries

and to assure that related maintenance actions are properly cleared per DA Pam 738-

751, paragraphs 1-8 and 1-9 before forms are placed in the six-month file.

3-89

STP 34-96U14-SM-TG

Performance Steps

7. Determine aircraft condition status.

a. Determine aircraft condition status, as shown in block 10, SYSTEM STATUS of this

form. A matching status symbol must be on the current aircraft logbook forms, that is,

DA Form 2408-13-1, DA Form 2408-13-2, or DA Form 2408-14. When scheduled

maintenance inspections or extensive maintenance is being performed on the aircraft a

matching condition status symbol may also appear on a DA Form 2408-13-3. A

narrative of the fault, directive, inspection, and so forth, must be printed in the fault block

of each form. Block 10, SYSTEM STATUS must reflect the current condition status

symbol for the most serious uncorrected fault, unapplied directives, such as SOF

message/ASAM/TB, MWO, component/module, accessories, and other items due or

overdue replacement, or scheduled or special inspections due or overdue completion

that are recorded on the DA Form 2408-13-1, DA Form 2408-13-2, DA Form 2408-13-3,

and DA Form 2408-14.

b. Check the DA Form 2408-18 to see if any inspections, services, or replacements of

items are due or overdue for completion.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Identified logbook with equipment.

——

2. Utilized DA Form 2408.

——

3. Prepared DA Form 2408-12.

——

4. Prepared DA Form 2408-13.

——

5. Prepared DA Form 2408-13-1.

——

6. Prepared DA Form 2408-13-2.

——

7. Determined if aircraft, or other related equipment, is safe to fly/use.

——

3-90

MOS/Skill Level Tasks-Skill Level 1

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

DA Pam 738-750

TC 34-212

DA Pam 738-751

DA Form 2408-31

Unit SOP

DA Form 2408

DA Form 2408-12

DA Form 2408-13

DA Form 2408-13-1

DA Form 2408-13-2

DA Form 2408-13-3

DA Form 2408-14

DA Form 2408-18

3-91

STP 34-96U14-SM-TG

Subject Area 5: INTELLIGENCE OPERATIONS

301-96U-1260

PREPARE REPORTS FROM UNMANNED AERIAL VEHICLE (UAV) COLLECTED

INFORMATION

Conditions: Given software with current report format(s), collection requirement(s), reportable

information objectives, automation equipment and collected material, unit standing operating

procedures (SOPs), TC 34-212, TM 9-5895-681-10 (Shadow), TM 9-5895-692-10-1 (Hunter),

and TM 9-5895-692-10-2 (Hunter).

Standards: Prepare reports in accordance with the collection requirements, unit SOP,

TC 34-212, and TM 9-5895-681-10 (Shadow) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-

10-2 (Hunter).

Performance Steps

Prepare for mission:

Air vehicle operator (AVO)/mission payload operator (MPO) will:

a. Verify mission plan from mission commander (MC).

b. Extract pertinent information from air reconnaissance request/task message and USMTF

joint tactical surveillance request.

c. Insure specific mission priority Intelligence requirements are verified with data exploiter

(DE).

d. Prepare an appropriate message shell (RECCEXREP, free text, SALUTE) in

accordance with TC 34-55 and unit SOP.

Compose message.

a. Compose message in accordance with TC 34-55.

b. Compares mission results with requestor’s requirements.

c. Lists results that satisfy mission requirements.

d. Lists results that do not satisfy mission requirements.

Complete message.

a. Complete REXCCEXREP in accordance with TC 34-55 and STANAG 3377.

b. Complete freeform message in accordance with unit SOP.

c. Complete SALUTE report in accordance with unit SOP.

d. Transmit message to release authority.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

3-92

MOS/Skill Level Tasks-Skill Level 1

Performance Measures

NO GO

1. Prepared for mission.

——

2. Composed message.

——

3. Completed message.

——

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TC 34-212

TC 34-55

TM 9-5895-681-10

STANAG 3377

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOP

3-93

STP 34-96U14-SM-TG

301-96U-1261

RECOGNIZE ITEMS OF SIGNIFICANCE FOR MILITARY OPERATIONS COLLECTED BY

UNMANNED AERIAL VEHICLE (UAV)

Conditions: Given a mission requirement(s), a UAV system, associated equipment, materials,

vehicle identification guide based on the area of interest (AI) and TM 9-5895-681-CL (Shadow)

or TM 9-5895-692-CL (Hunter).

Standards: Recognize items of significance for military operations in accordance with mission

requirements, command guidance, utilizing a vehicle identification guide, and unit standing

operating procedures (SOPs).

Performance Steps

Prepare for mission.

a. Ensure that the air vehicle operator (AVO)/mission payload operator (MPO) receives a

mission plan from the mission commander (MC).

b. Ensure the AVO, MPO, and MC review the mission plan and prepare the UAV in

accordance with task 301-96U-1067.

c. Ensure the MC informs the AVO and MPO if a remote video terminal will be used and

where the DE, if assigned, will be stationed.

Prepare for detection, recognition, and/or identification of items of significance for military

operations.

a. Ensure the MPO familiarizes him or herself with those items that may be in the AI:

(1) Obtain and review the recognition of combat vehicles (ROC-V) program via CD ROM

or online at https://rocv.army.mil/. If support for ROC-V is not available, obtain

vehicle identification flash cards for review. The MPO should focus on those items

of equipment the unit S2 has designated as belonging to opposing forces that are

expected in the AI. If possible, the MPO should bring the identification guide into the

shelter.

(2) Obtain and review live video and/or still pictures of those forces that may be in the

area. If possible bring any still pictures available into the shelter to aid in detection,

recognition and/or identification.

(3) Review the situation map (SITMAP) for the AI to gain full situational awareness.

Items to look for include but are not limited to: Anti-aircraft artillery and surface-to-air

missile sites, lines of communications, obstacles, obstructions, ingress/egress routes

and targets. Review latest situational updates from higher headquarters to

determine the impact on operations, identification and reporting.

b. Ensure the AVO/MPO develop and coordinate a valid search plan for each target area

and adjust the mission plan accordingly.

3-94

MOS/Skill Level Tasks-Skill Level 1

Performance Steps

3. Scan the area of interest.

a. Ensure proper video annotations/overlays are selected for usable imagery. Proper

annotations/overlays include but are not limited to: target coordinates, north arrow, date

time group, depression angle, and FOV. Payload annotations/overlays may be dictated

in the unit SOP, by the MC, or higher command authority.

b. Ensure the AVO/MPO scan the AI in accordance with the mission plan.

c. Ensure the MPO informs the MC and DE if an object is detected, recognized or

identified. The MC will make a decision on the target based on recommendations from

the DE. If the DE is unavailable the MPO will attempt to identify the target using the

identification guide.

d. Ensure the MPO maintains valid depression angle, brightness, contrast, gain, and focus

for usable imagery.

e. Ensure the DE confirms all targets observed thru the payload based on the needs of the

mission.

f. The MC determines all decisions regarding target disposition. The MC has the authority

to direct an ad hoc mission.

g. Ensure the MPO makes/sends reports as directed/specified in local SOP or command

reporting guidance.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Prepared for mission.

——

2. Prepared for detection, recognition, and/or identification of items of

——

significance for military operations.

3. Scanned the area of interest.

——

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

Identification Keys

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOP

3-95

STP 34-96U14-SM-TG

Subject Area 6: COMMUNICATIONS

113-625-2081

OPERATE DIGITAL SECURE VOICE TERMINAL (DSVT) KY-68

Conditions: This task is performed when directed by your supervisor and under any condition

or situation. The following must be available for correct performance:

1. Properly installed DSVT KY-68.

2. TM 11-5810-329-10.

3. Electronic transfer device, TSEC/KY-13 with key(s).

4. Fill cable.

Standards: Operate digital secure voice telephone (DSVT) KY-68 in accordance with

procedures in TM 11-5810-329-10 (section III), and unit standing operating procedures (SOPs).

Performance Steps

1. Initialize DSVT KY-68.

2. Load KY-68 with KYK-13.

a. Connect KYK-13 to KY-68 using fill cable.

b. Perform loading procedures.

c. Disconnect fill cable from KY-68.

3. Operate equipment under usual conditions.

a. Process an outgoing call.

b. Process an incoming call.

c. Process an outgoing conference call.

d. Process an incoming conference call.

e. Perform emergency access.

4. Perform normal shutdown procedures.

a. Perform complete shutdown.

b. Perform shutdown saving COMSEC data.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Initialized DSVT KY-68.

——

2. Loaded KY-68 with KYK-13.

——

a. Connected KYK-13 to KY-68 using fill cable.

b. Performed loading procedures.

c. Disconnected fill cable from KY-68.

3-96

MOS/Skill Level Tasks-Skill Level 1

Performance Measures

NO GO

3. Operated equipment under usual conditions.

——

a. Processed an outgoing call.

b. Processed an incoming call.

c. Processed an outgoing conference call.

d. Processed an incoming conference call.

e. Performed emergency access.

4. Performed normal shutdown procedures.

——

a. Performed complete shutdown.

b. Performed shutdown saving COMSEC data.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 11-5810-329-10

Unit SOP

3-97

STP 34-96U14-SM-TG

301-96U-1310

OPERATE TACTICAL COMMUNICATION EQUIPMENT

Conditions: Given an operational single channel ground and airborne radio systems

(SINCGARS), single unit transceiver (SUT), KYK-13/TSEC with keys, distant station,

TM 11-5820-890-10-1, TM 11-5820-890-10-3, unit signal operation instruction (SOI), and

TM 9-5895-681-CL (Shadow) or TM 9-5895-692-CL (Hunter).

Standards: Transmit and receive messages and/or via a SINCGARS/SUT radio, multiple

subscriber equipment (MSE), and/or fiber optic cables (FOCs), with a distant station in

accordance with TM 11-5820-890-10-1, TM 11-5820-890-10-3, unit SOI, and TM 9-5895-681-10

(Shadow) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Prepare SINCGARS/MSE communications.

a. Set SINCGARS radios in accordance with TM 11-5820-890-10-1.

(1) Turn the function (FCTN) switch to SQ-ON.

(2) Set power (PWR) knob low (LO), medium (M), high (HI), or power amplifier (PA), as

required.

(3) Set the data rate to 16000 for messages or 4800 for missions, as required.

b. Perform SINCGARS radio voice check.

c. Open tactical messages window.

d. Select change tables.

(1) Enter password trw-uavsr-1.

e. Select local node.

(1) Set local node name and number.

(2) Enter route indicator.

(3) Set message serial number, as required.

Note: Steps (4), (5), and (7) are for MSE only.

(4) Set node area code, as required.

(5) Set node phone number, as required.

(6) Set classification, as required.

(7) Set operation, as required.

(8) Save changes by selecting save.

(9) Select done to exit local node.

f. Select net route.

(1) Set net route tables, as required.

(2) Select next/previous to find first destination.

(3) Set board/port field based on the board/port table.

(4) Select DCT for SINCGARS or mode 1 for MSE in the net protocol field.

(5) Set radio silence to no.

(6) Set area code, as required.

(7) Set phone number, as required.

(8) Set max number of re-trans to 3, if required.

3-98

MOS/Skill Level Tasks-Skill Level 1

Performance Steps

(9) Set max re-trans delay to 020, if required.

(10) Enter local node number in the message originator.

(11) Enter 7 for ND RTE indicator.

(12) Select save to save changes.

(13) Find the next destination table by selecting previous/next.

(14) Repeat step 6a for all destinations.

g. Select done in the net route tables. Verify message receipt using SINCGARS radio.

Perform transmitting a message via SINCGARS radio.

a. Select write message.

b. Select message format.

c. Enter data to prepare message for transmission.

d. Select save and send when message is complete.

e. Select destination information.

f. Call the receiving station that the message is being sent.

g. Select send to send message to destination.

h. Verify message receipt using the SINCGARS radio.

Perform receiving message via SINCGARS radio.

a. Set SINCGARS radios in accordance with TM 11-5820-890-10-1.

(1) Turn the FCTN switch to SQ-ON.

(2) Set PWR knob LO, M, Hl, or PA, as required.

(3) Set the data rate to 16000 for messages.

b. Check and observe green “R” for receipt of incoming message.

c. Select tactical messages window.

d. Select read message.

e. Select new message.

f. Verify message receipt using SINCGARS radio.

Perform transmitting a mission plan via SINCGARS radio.

a. Set SINCGARS radios in accordance with TM 11-5820-890-10-1.

(1) Turn the FCTN switch to SQ-ON.

(2) Set PWR knob LO, M, Hl, or PA, as required.

(3) Set the data rate to 4800 for missions.

b. Perform SINCGARS radio voice check.

c. Select write mission.

d. Select file name and choose mission to be sent.

e. Select send to complete preparation.

f. Select destination information.

3-99

STP 34-96U14-SM-TG

Performance Steps

g. Notify receiving station of mission being sent.

h. Select SEND to send mission to destination.

Verify mission receipt using SINCGARS radio.

Perform receiving a mission plan via SINCGARS radio.

a. Set up SINCGARS radios in accordance with TM 11-5820-890-10-1.

(1) Set FCTN switch to SQ-ON.

(2) Set PWR knob to LO, M, or Hl, as required.

(3) Set data rate to 4800 for missions.

b. Perform voice check on SINCGARS radio.

c. Check and observe blue “R” for receipt of incoming mission plan.

d. Open tactical message.

e. Select read message (this extinguishes blue “R”).

f. Use file manager, AVLD, or AP mission load to check receipt of mission plan.

g. Verify mission receipt using SINCGARS radio.

Perform transmitting and receiving message via MSE telephone.

a. Check that the data adapter communication module (DACM) manual light is illuminated.

(1) If the manual light is ON continue with step 2.

(2) If the manual light is not ON restart TACOMA.

b. Select write message in preparation for transmission.

c. Select message type.

d. Enter data to prepare message for transmission.

e. Select save and send when the message is complete.

f. Prepare destination information by entering data.

g. Contact destination via MSE.

h. Accept MSE contact with sender by answering the telephone.

Select send to send message to destination.

Check and observe red “S” for out going message.

k. Sending station announce “NOW”.

Synchronize DACM in sending and receiving stations by both stations pressing off hook

for 2 seconds.

m. Sender and destination stations hang up within 5 to 8 seconds.

n. Observe yellow “S” for out going message.

3-100

MOS/Skill Level Tasks-Skill Level 1

Performance Steps

o. Observe yellow “R” for incoming message.

p. Observe green “R” for complete message received.

q. View received message by selecting read message.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Prepared for SINCGARS/MSE communication.

——

2. Transmitted a message via SINCGARS radio.

——

3. Received a message via SINCGARS radio.

——

4. Transmitted a mission plan via SINCGARS radio.

——

5. Received a mission plan via SINCGARS radio.

——

6. Transmitted and received a message via MSE telephone.

——

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 11-5820-890-10-1

TM 11-5820-890-10-3

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOI

3-101

STP 34-96U14-SM-TG

Subject Area 8: INSPECTIONS

301-96U-1411H

PERFORM AN UNMANNED AERIAL VEHICLE (UAV) DAILY INSPECTION (HUNTER)

Conditions: Given an unmanned aerial vehicle (UAV) system, logbook, associated equipment

and supplies, and TM 9-5895-692-CL.

Standards: Perform a UAV daily inspection in accordance with TM 9-5895-692-10-1 and

TM 9-5895-692-10-2.

Performance Steps

1. Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraph 8-9 A, or

TM 9-589-692-CL, section 6.1.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-692-10-2,

——

chapter 8, section I, paragraph 8-9 A, or TM 9-589-692-CL, section 6.1.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

3-102

MOS/Skill Level Tasks-Skill Level 1

301-96U-1412H

PERFORM AN UNMANNED AERIAL VEHICLE (UAV) TURN-AROUND INSPECTION

(HUNTER)

Conditions: Given a requirement to re-launch an unmanned aerial vehicle (UAV), UAV system,

flight crew, associated equipment, and TM 9-5895-692-CL.

Standards: Perform a UAV turn-around inspection in accordance with TM 9-5895-692-10-1,

and TM 9-5895-692-10-2.

Performance Steps

1. Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraph 8-9 B, or

TM 9-589-692-CL, section 6.2.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-692-10-2,

——

chapter 8, section I, paragraph 8-9 B, or TM 9-589-692-CL, section 6.2.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

3-103

STP 34-96U14-SM-TG

301-96U-1413H

PERFORM AN UNMANNED AERIAL VEHICLE (UAV) END OF RUNWAY INSPECTION

(HUNTER)

Conditions: Given an unmanned aerial vehicle (UAV) ready for take-off at the end of the

runway, flight crew, associated equipment, and TM 9-5895-692-CL.

Standards: Perform a UAV end of runway inspection in accordance with TM 9-5895-692-10-1

and TM 9-5895-692-10-2.

Performance Steps

1. Perform steps as indicated in TM 9-589-692-CL, section 6.3.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-589-692-CL,

——

section 6.3.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

3-104

MOS/Skill Level Tasks-Skill Level 1

301-96U-1414H

PERFORM AN UNMANNED AERIAL VEHICLE (UAV) POST-FLIGHT INSPECTION

(HUNTER)

Conditions: Given an unmanned aerial vehicle (UAV) returning from a mission with no further

mission requirement(s), flight crew, associated equipment, and TM 9-5895-692-CL.

Standards: Perform a UAV post-flight inspection in accordance with TM 9-5895-692-10-1 and

TM 9-5895-692-10-2.

Performance Steps

1. Perform steps as indicated in TM 9-5895-692-10-2, chapter 8, section I, paragraph 8-9 C, or

TM 9-589-692-CL, section 6.4.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Performed all steps correctly in accordance with TM 9-5895-692-10-2,

——

chapter 8, section I, paragraph 8-9 C, or TM 9-589-692-CL, section 6.4.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

3-105

STP 34-96U14-SM-TG

Skill Level 2

Subject Area 1: EMPLACEMENT OPERATIONS

301-96U-2011

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) LAUNCH AND RECOVERY (L/R) SITE

EMPLACEMENT

Conditions: Given a launch and recovery (L/R) site, layout plan, unmanned aerial vehicle

(UAV) system, associated equipment, and TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10

(Hunter).

Standards: Supervise UAV L/R site emplacement in accordance with unit standing operating

procedures (SOPs), and TM 9-5895-681-10 (Shadow) or TM 9-1425-691-10 (Hunter).

Performance Steps

1. Receive emplacement orders from local/higher command.

2. Assign emplacement teams.

a. Ensure teams have proper tools and equipment for movement.

b. Ensure teams have properly licensed personnel for 5-ton, high mobility multipurpose

wheeled vehicle (HMMWV), and any other vehicles involved in emplacement.

c. Ensure that personnel know the layout of site.

3. Supervise emplacement. Verify that emplacement is performed in accordance with tasks:

301-96U-1012S, 301-96U-1013H, 301-96U-1014H, 301-96U-1015, 301-96U-1016S,

301-96U-1018, 301-96U-1019S, 301-96U-1026H, 301-96U-1027S, 301-96U-1028S,

301-96U-1029S, 301-96U-1030H, 301-96U-1031H, 301-96U-1032, and 301-96U-1033.

4. Perform final inspection.

a. Ensure that equipment is emplaced properly.

b. Conduct inventory of all equipment.

c. Ensure that equipment is prepared for power-up.

d. Report back to local/higher command with status of site emplacement.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received emplacement orders from local/higher command.

——

2. Assigned emplacement teams.

——

3. Supervised emplacement.

——

4. Performed final inspection.

——

3-106

STP 34-96U14-SM-TG

301-96U-2012

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) FORWARD CONTROL SITE

EMPLACEMENT

Conditions: Given an unmanned aerial vehicle (UAV) system, associated equipment, site plan,

and TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10 (Hunter).

Standards: Supervise UAV forward control site emplacement in accordance with unit standing

operating procedures (SOPs), and TM 9-5895-681-10 (Shadow) or TM 9-1425-691-10 (Hunter).

Performance Steps

1. Receive movement orders from local/higher command.

2. Assign emplacement teams.

a. Ensure teams have proper tools and equipment for set-up.

b. Ensure teams have properly licensed personnel for any vehicles involved in

emplacement.

c. Ensure that personnel know the layout of site.

3. Supervise emplacement. Verify that emplacement is performed in accordance with tasks:

301-96U-1014H, 301-96U-1015, 301-96U-1016S, 301-96U-1018, 301-96U-1019S, and

301-96U-1032.

4. Perform final inspection.

a. Ensure that equipment is set-up properly.

b. Conduct inventory of all equipment.

c. Prepare for mission.

d. Report back to local/higher command, status of site emplacement.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received emplacement orders from local/higher command.

——

2. Assigned emplacement teams.

——

3. Supervised emplacement.

——

4. Performed final inspection.

——

3-108

STP 34-96U14-SM-TG

Subject Area 2: FLIGHT/MISSION OPERATIONS

301-96U-2060

SUPERVISE PREPARATIONS OF AN UNMANNED AERIAL VEHICLE (UAV) SYSTEM FOR

OPERATIONS

Conditions: Given an emplaced unmanned aerial vehicle (UAV) system, associated

equipment, and TM 9-5895-681-CL (Shadow) or TM 9-5895-692-CL (Hunter).

Standards: Supervise preparation of a UAV system for operations in accordance with unit

standing operating procedures (SOPs), and TM 9-5895-681-10 (Shadow) or TM 9-5895-692-10-

1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

Assign preparation teams.

a. Assign an air vehicle operator (AVO)/mission payload operator (MPO) team to prepare

UAV control stations and antennas for mission.

b. Assign EP team to prepare runway/launch area for mission (launch and recovery site

only).

c. Assign ground crew to prepare UAV and engine run up area for mission (launch and

recovery site only).

Supervise preparation of a UAV system for operations.

a. Ensure power up procedures are performed in accordance with tasks: 301-96U-1014H,

301-96U-1060, 301-96U-1061S, 301-96U-1063S, and 301-96U-1064.

b. Ensure launch area is clear of foreign object damage (FOD).

c. Ensure arresting gear are set up for mission.

d. Ensure flight control boxes (FCBs) are connected.

e. Ensure assembly of air vehicle (AV) is in accordance with task 301-96U-1033.

f. Ensure AV is properly installed in the chock run-up up stand or on the launcher.

Perform final inspection.

a. Ensure that equipment is powered up properly.

b. Conduct inventory of all equipment.

c. Prepare for preflight and launch operations.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

3-110

MOS/Skill Level Tasks-Skill Level 2

Performance Measures

NO GO

1. Assigned preparation teams.

——

2. Supervised preparation of UAV system for operations.

——

3. Performed final inspection.

——

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOP

3-111

STP 34-96U14-SM-TG

301-96U-2061

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) MISSION PLANNING

Conditions: Given a mission, current situation, airspace management products, an operational

control station with associated equipment and materials, and TM 9-5895-681-CL (Shadow) or

TM 9-5895-692-CL (Hunter).

Standards: Supervise unmanned aerial vehicle (UAV) mission planning in accordance with

mission requirements, unit standing operating procedures (SOPs), TC 1-201, TC 34-212,

FM 3-52, and TM 9-5895-681-10 (Shadow) or TM 9-5895-692-10-1 (Hunter)/

TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Receive mission from local/higher command.

a. Check on availability of and assign a UAV for the mission.

b. Assign the configuration of the UAV to match the mission.

c. Check on the weather for the area and time of mission.

d. Assign an air vehicle operator (AVO)/mission payload operator (MPO) for the mission.

2. Supervise preparation of mission plan. Ensure that the mission plan is performed in

accordance with task 301-96U-1067.

3. Perform final inspection.

a. Ensure that the UAV is set-up properly.

b. Ensure that the mission is set-up properly.

c. Report back to local/higher command with status of the mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Receive mission from local/higher command.

——

2. Supervised preparation of mission plan.

——

3. Performed final inspection.

——

3-112

STP 34-96U14-SM-TG

301-96U-2063

APPLY AIRSPACE INSTRUCTIONS TO UNMANNED AERIAL VEHICLE (UAV) LAUNCH

AND RECOVERY (L/R) OPERATIONS

Conditions: Given a mission, unmanned aerial vehicle (UAV) system, Army airspace command

and control (A²C²) element, and airspace control measures.

Standards: Apply airspace instructions to UAV launch and recovery (L/R) operations in

accordance with airspace management products, FM 3-52, and local standing operating

procedures (SOPs).

Performance Steps

Mark all airspace boundaries.

a. Ensure all exterior airspace boundaries are marked and known by all air vehicle operator

(AVO) personnel.

b. Ensure all interior airspace sections are marked and known by all AVO personnel.

c. Ensure all “no-fly zone” airspace sections are marked and known by all AVO personnel.

Collect any special airspace instructions, from air traffic control, and apply to L/R operations.

a. Collect any airspace flight corridor instructions, from air traffic control, and apply to L/R

operations.

b. Collect any “notice to airmen (NOTAM)” airspace instructions, from air traffic control, and

apply to L/R operations.

c. Collect any weather data pertaining to the airspace being used, from air traffic control,

and apply to L/R operations.

d. Collect any information pertaining to the “restricted operations zone (ROZ)” airspace

being used, from air traffic control, and apply to L/R operations.

e. Collect any information pertaining to specific altitudes of airspace being used, from air

traffic control, and apply to L/R operations.

Collect all ingress and egress air routes that could possibly be flown after launch or before

recovery and apply to L/R operations.

a. Collect all ingress air routes for mission.

b. Collect all egress air routes for mission.

c. Collect all approved military flight routes for mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

3-114

MOS/Skill Level Tasks-Skill Level 2

Performance Measures

NO GO

1. Marked all airspace boundaries.

——

2. Collected any special airspace instructions, from air traffic control, and

——

applied to L/R operations.

3. Collected all ingress and egress air routes that could possibly be flown

——

after launch or before recovery and applied to L/R operations.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

FM 3-52

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOP

3-115

STP 34-96U14-SM-TG

301-96U-2064

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) LAUNCH AND RECOVERY (L/R)

OPERATIONS

Conditions: Given a mission, an operational unmanned aerial vehicle (UAV) launch and

recovery (L/R) site, associated equipment, and TM 9-5895-681-CL (Shadow) or TM 9-5895-

692-CL (Hunter).

Standards: Supervise UAV L/R operations in accordance with mission requirements, TC-1-201,

FM 57-38, local standing operating procedures (SOPs), and TM 9-5895-681-10 (Shadow) or

TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Receive mission from local/higher command.

a. Check on availability of and assign a UAV for the mission.

b. Assign the configuration of the UAV to match the mission.

c. Check on the weather for the area and time of mission.

d. Assign an AVO/MPO for the mission.

e. Ensure that the mission is set-up properly.

2. Supervise mission operations. Ensure that launch and recovery operations are performed

in accordance with tasks: 301-96U-1060, 301-96U-1061S, 301-96U-1063S, 301-96U-1064,

301-96U-1065, 301-96U-1066, 301-96U-1067, 301-96U-1068H, 301-96U-1069, 301-96U-

1076, 301-96U-1077, 301-96U-1078, and 301-96U-1079S.

3. Perform final inspection.

a. Ensure that the UAV is configured properly.

b. Report back to local/higher command with status of the mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received mission from local/higher command.

——

2. Supervised mission operations.

——

3. Performed final inspection.

——

3-116

STP 34-96U14-SM-TG

301-96U-2065

APPLY AIRSPACE INSTRUCTIONS TO UNMANNED AERIAL VEHICLE (UAV)

FLIGHT/MISSION OPERATIONS

Conditions: Given a mission, unmanned aerial vehicle (UAV) system, Army airspace command

and control (A²C²) element, and airspace control measures.

Standards: Apply airspace instructions to UAV L/R operations in accordance with airspace

management products, FM 3-52, and unit standing operating procedures (SOPs).

Performance Steps

Mark all airspace boundaries.

a. Ensure all exterior airspace boundaries are marked and known by all air vehicle operator

(AVO) personnel.

b. Ensure all interior airspace sections are marked and known by all AVO personnel.

c. Ensure all “no-fly zone” airspace sections are marked and known by all AVO personnel.

Collect any special airspace instructions from air traffic control and apply to flight/mission

operations.

a. Collect any airspace flight corridor instructions from air traffic control and apply to

flight/mission operations.

b. Collect any “notice to airmen (NOTAM)” airspace instructions, from air traffic control, and

apply to flight/mission operations.

c. Collect any weather data pertaining to the airspace being used, from air traffic control,

and apply to flight/mission operations.

d. Collect any information pertaining to any “restricted operations zone (ROZ)” airspace

being used, from air traffic control, and apply to flight/mission operations.

e. Collect any information pertaining to specific altitudes of airspace being used, from air

traffic control, and apply to flight/mission operations.

Collect all air routes that could possibly be flown during the mission and apply to

flight/mission operations.

a. Collect all ingress air routes for mission.

b. Collect all egress air routes for mission.

c. Collect all approved military flight routes for mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

3-118

MOS/Skill Level Tasks-Skill Level 2

Performance Measures

NO GO

1. Marked all airspace boundaries.

——

2. Collected any special airspace instructions from air traffic control and

——

applied to flight/mission operations.

3. Collected all air routes that could possibly be flown during the mission and

——

applied to flight/mission operations.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

FM 3-52

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOP

3-119

STP 34-96U14-SM-TG

301-96U-2066

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) FLIGHT/MISSION OPERATIONS

Conditions: Given a mission, an operational unmanned aerial vehicle (UAV) site, associated

equipment, and TM 9-5895-681-CL (Shadow) or TM 9-5895-692-CL (Hunter).

Standards: Supervise flight/mission operations in accordance with TM 9-5895-681-10

(Shadow) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Receive mission from local/higher command.

a. Check on availability of a UAV for the mission.

b. Check on the weather for the area and time of mission.

c. Assign an air vehicle operator (AVO)/mission payload operator (MPO) for the mission.

d. Ensure the mission is set-up properly.

2. Supervise flight/mission operations.

a. Ensure that the mission is set-up properly.

b. Ensure that flight/mission operations are performed in accordance with tasks: 301-96U-

1060, 301-96U-1061S, 301-96U-1064, 301-96U-1067, 301-96U-1068H, 301-96U-1069,

301-96U-1070, 301-96U-1071, 301-96U-1072, 301-96U-1073, 301-96U-1074, 301-96U-

1075, 301-96U-1076, 301-96U-1078, and 301-96U-1079S.

c. Ensure airspace boundaries are not crossed with the AV.

d. Ensure known threats are avoided and targets are observed.

e. Ensure specific targets and any named areas of interest (NAIs) are observed.

3. Perform final inspection. Report back to local/higher command, status of the mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received mission from local/higher command.

——

2. Supervised flight/mission operations.

——

3. Performed final inspection.

——

3-120

STP 34-96U14-SM-TG

301-96U-2067

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) RECONNAISSANCE, SURVIELLANCE,

AND TARGET ACQUISITION (RSTA) OPERATIONS

Conditions: Given an unmanned aerial vehicle (UAV) system and a reconnaissance,

surveillance, and target acquisition (RSTA) mission.

Standards: Supervise UAV RSTA operations in accordance with TC 1-201, FM 6-30,

FM 17-98, FM 34-1, TC 34-212, and TM 9-5895-681-10 (Shadow) or TM 9-5895-692-10-1

(Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Collect mission requirements for RSTA operations from higher/adjacent command.

2. Supervise reconnaissance operations.

a. Ensure the air vehicle operator (AVO)/mission payload operator (MPO) team knows the

reconnaissance area for the mission.

b. Ensure the reconnaissance area has been appropriately marked in the controlling

station.

c. Ensure the entire area has been surveyed during the reconnaissance mission.

3. Supervise surveillance operations.

a. Ensure the AVO/MPO team knows the surveillance area for the mission.

b. Ensure the surveillance area has been appropriately marked in the controlling station.

c. Ensure the entire area has been surveyed during the surveillance mission.

4. Supervise target acquisition operations.

a. Ensure the AVO/MPO team knows the objective target area for the mission.

b. Ensure the objective target area has been appropriately marked in the controlling

station.

c. Ensure the all targets have been surveyed during the target acquisition mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Collected mission requirements for RSTA operations from higher/adjacent

——

command.

2. Supervised reconnaissance operations.

——

3. Supervised surveillance operations.

——

4. Supervised target acquisition operations.

——

3-122

MOS/Skill Level Tasks-Skill Level 2

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

FM 3-55

FM 6-30

FM 17-98

FM 34-1

TC 1-201

TC 34-212

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

3-123

STP 34-96U14-SM-TG

301-96U-2068

SUPERVISE POWER DOWN OF AN UNMANNED AERIAL VEHICLE (UAV) SYSTEM AFTER

OPERATIONS

Conditions: Given an emplaced, operating, unmanned aerial vehicle (UAV) system, associated

equipment, and TM 9-5895-681-CL (Shadow) or TM 9-5895-692-CL (Hunter).

Standards: Supervise power down of a UAV system after operations in accordance with unit

standing operating procedures (SOPs), and TM 9-5895-681-10 (Shadow) or TM 9-5895-692-10-

1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Assign power down teams.

a. Assign an air vehicle operator (AVO)/mission payload operator (MPO) team to power

down UAV control stations with power sources and antennas used during mission.

(1) Ensure power down procedures are performed in accordance with tasks: 301-96U-

1078 and 301-96U-1079S.

b. Assign ground crew to power down UAV used during the mission (launch and recovery

site only).

(1) Ensure power down procedures are performed in accordance with task 301-96U-

1077.

2. Perform final inspection.

a. Ensure that equipment is powered up properly.

b. Conduct inventory of all equipment.

c. Prepare for preflight and launch operations.

3. Review system logbooks in accordance with task 301-96U-2211.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Assigned power down teams.

——

2. Performed final inspection.

——

3. Reviewed system logbooks in accordance with task 301-96U-2211.

——

3-124

STP 34-96U14-SM-TG

Subject Area 3: DISPLACEMENT OPERATIONS

301-96U-2111

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) LAUNCH AND RECOVERY (L/R) SITE

DISPLACEMENT

Conditions: Given an unmanned aerial vehicle (UAV) system, associated equipment, and

TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10 (Hunter).

Standards: Supervise UAV launch and recovery (L/R) site displacement in accordance with unit

standing operating procedures (SOPs) and TM 9-5895-681-10 (Shadow) or TM 9-1425-691-10

(Hunter).

Performance Steps

Receive movement orders from local/higher command.

Assign displacement teams.

a. Ensure teams have proper tools and equipment for movement.

b. Ensure teams have properly licensed personnel for 5-ton, high-mobility multipurpose

wheeled vehicle (HMMWV), and any other vehicles involved in displacement.

c. Ensure that personnel know the lineup order of displaced vehicle/equipment.

d. Verify that the team leaders have a copy of the load plans for their equipment.

Supervise displacement. Verify that displacement is performed in accordance with tasks:

301-96U-1112S, 301-96U-1113H, 301-96U-1114H, 301-96U-1115, 301-96U-1116S,

301-96U-1118, 301-96U-1119S, 301-96U-1126H, 301-96U-1127S, 301-96U-1128S,

301-96U-1129S, 301-96U-1130H, 301-96U-1131H, 301-96U-1132, and 301-96U-1133.

Perform final inspection.

a. Ensure that equipment is displaced properly.

b. Conduct inventory of all equipment.

c. Check and verify load plans.

d. Ensure that equipment is prepared for movement.

e. Perform a walk around inspection of the site and ensure that site is ready to be vacated.

f. Report back to local/higher command, status of site displacement.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

3-126

MOS/Skill Level Tasks-Skill Level 2

Performance Measures

NO GO

1. Received movement orders from local/higher command.

——

2. Assigned displacement teams.

——

3. Supervised displacement.

——

4. Performed final inspection.

——

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-691-10

FM 10-67-1

TM 9-1425-697-13

FM 10-67-2

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-696-13

Unit SOP

3-127

STP 34-96U14-SM-TG

301-96U-2112

SUPERVISE UNMANNED AERIAL VEHICLE (UAV) FORWARD CONTROL SITE

DISPACEMENT

Conditions: Given an operational unmanned aerial vehicle (UAV) system, associated

equipment, and TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10 (Hunter).

Standards: Supervise UAV forward control site displacement in accordance with local standing

operating procedures (SOPs), and TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10 (Hunter).

Performance Steps

1. Receive movement orders from local/higher command.

2. Assign displacement teams.

a. Ensure teams have proper tools and equipment for movement.

b. Ensure teams have properly licensed personnel for 5-ton, high-mobility multipurpose

wheeled vehicle (HMMWV), and any other vehicles involved in displacement.

c. Ensure that personnel know the lineup order of displaced vehicle/equipment.

d. Verify that the team leaders have a copy of the load plans for there equipment.

3. Supervise displacement. Verify that displacement is performed in accordance with tasks:

301-96U-1114H, 301-96U-1115, 301-96U-1116S, 301-96U-1118, 301-96U-1119S, and

301-96U-1132.

4. Perform final inspection.

a. Ensure that equipment is displaced properly.

b. Conduct inventory of all equipment.

c. Check and verify load plans.

d. Ensure that equipment is prepared for movement.

e. Perform a walk around inspection of the site and ensure that site is ready to be vacated.

f. Report back to local/higher command, status of site displacement.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received movement orders from local/higher command.

——

2. Assigned displacement teams.

——

3. Supervised displacement.

——

4. Performed final inspection.

——

3-128

STP 34-96U14-SM-TG

Subject Area 4: MAINTENANCE

301-96U-2210

SUPERVISE OPERATOR LEVEL MAINTENANCE OF AN UNMANNED AERIAL VEHICLE

(UAV) SYSTEM

Conditions: Given unmanned aerial vehicle (UAV) system, associated equipment, TM 9-5895-

681-CL (Shadow) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter), and any

additional operator level maintenance manuals.

Standards: Supervise operator level maintenance of a UAV system in accordance with

TM 9-5895-681-10 (SHADOW) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter),

and any additional operator level maintenance manuals.

Performance Steps

Check equipment.

a. Check what equipment will need maintenance.

b. Assign equipment to team leaders for maintenance.

c. Ensure that all team leaders have the proper manuals/paperwork for maintenance.

d. Ensure that all team leaders have properly licensed personnel for any equipment

needed.

Supervise maintenance operations.

a. Ensure MPU is checked in accordance with task 301-96U-1214H.

b. Ensure that GDT is checked in accordance with task 301-96U-1218.

c. Ensure that ground control station (GCS)/mission planning station (MPS) is checked in

accordance with task 301-96U-1215.

d. Ensure that LRS is checked in accordance with task 301-96U-1203.

e. Ensure that LRT is checked in accordance with task 301-96U-1226H.

f. Ensure that RVT is checked in accordance with task 301-96U-1232.

g. Ensure that ground support equipment is checked in accordance with task 301-96U-

1230H.

Perform final inspection.

a. Perform an inventory of all equipment.

b. Perform a walk around inspection of the site/equipment and ensure that site/equipment

has been updated in the logbooks and or any paperwork involved.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

3-130

MOS/Skill Level Tasks-Skill Level 2

Performance Measures

NO GO

1. Checked equipment.

——

2. Supervised maintenance operations.

——

3. Performed final inspection.

——

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TM 9-1425-697-13

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-696-13

TM 9-6115-642-10

TM 11-5820-890-10-1

TM 11-5820-890-10-3

3-131

STP 34-96U14-SM-TG

301-96U-2211

REVIEW UNMANNED AERIAL VEHICLE (UAV) LOGBOOKS

Conditions: Given logbooks and associated materials.

Standards: Review unmanned aerial vehicle (UAV) logbooks in accordance with DA Pam 738-

750, DA Pam 738-751, and unit standing operating procedures (SOPs).

Performance Steps

1. Identification. Identify the aircraft or other equipment to which the logbook belongs by using

the DA Form 2408-31 inserted in the plastic slot on the front of the binder.

2. Review logbook for completeness and/or errors.

a. Inspect the DA Form 2408-31 inserted in the plastic slot on the front of the binder to

ensure that is in the correct logbook.

b. Inspect all entries on DA Form 2408-12 for completeness and/or for any errors.

c. Inspect all entries on DA Form 2408-13 for completeness and/or for any errors.

d. Inspect all entries on DA Form 2408-13-1 for completeness and/or for any errors.

e. Inspect all entries on DA Form 2408-13-2 for completeness and/or for any errors.

f. Inspect all entries on DA Form 2408-13-3 for completeness and/or for any errors.

g. Inspect all entries on DA Form 2408-14 for completeness and/or for any errors.

h. Inspect all entries on DA Form 2408-18 for completeness and/or for any errors.

3. Review logbook for any inspections due on that piece of equipment.

4. Correct any deficiencies with the logbook.

5. Turn in the logbook to maintenance when completed.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Identified logbook with equipment.

——

2. Reviewed logbook for completeness and/or errors.

——

3. Reviewed logbook for any inspections due on that piece of equipment.

——

4. Corrected any deficiencies with the logbook.

——

5. Turned in the logbook to maintenance section when completed.

——

3-132

MOS/Skill Level Tasks-Skill Level 2

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

DA Pam 738-750

DA Form 2408-12

DA Pam 738-751

DA Form 2408-13

Unit SOP

DA Form 2408-13-1

DA Form 2408-13-2

DA Form 2408-13-3

DA Form 2408-14

DA Form 2408-18

DA Form 2408-31

3-133

STP 34-96U14-SM-TG

Subject Area 5: INTELLIGENCE OPERATIONS

301-96U-2260

SUPERVISE PREPARATION OF REPORTS FROM UNMANNED AERIAL VEHICLE (UAV)

COLLECTED INFORMATION

Conditions: Given the requirement to prepare a report, combat information, unmanned aerial

vehicle (UAV) imagery, and TM 9-5895-681-CL (Shadow) or TM 9-5895-692-CL (Hunter).

Standards: Supervise preparation of reports in accordance with the collection requirements,

unit standing operating procedures (SOPs), TC 34-212, TM 9-5895-681-10 (Shadow) or

TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Collect reporting requirements from higher/adjacent command.

a. Schedule.

b. Format.

c. Context.

2. Determine appropriate report to be prepared.

3. Provide guidance to assemble data for inclusion in report.

4. Assign subordinates to prepare written/electronic draft of the report.

5. Supervise subordinates in the proper marking and handling procedures for classified

material (see AR-380-5).

6. Review report.

7. Edit report.

8. Supervise subordinates in the proper dissemination of intelligence reports for dissemination.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Collected reporting requirements from higher/adjacent command.

——

2. Determined appropriate report to be prepared.

——

3. Provided guidance to assemble data for inclusion in report.

——

4. Assigned subordinates to prepare written/electronic draft of the report.

——

5. Supervised subordinates in the proper marking and handling procedures

——

for classified material (see AR-380-5).

3-134

MOS/Skill Level Tasks-Skill Level 2

Performance Measures

NO GO

6. Reviewed report.

——

7. Edited report.

——

8. Supervised subordinates in the proper dissemination of intelligence reports

——

for dissemination.

Evaluation Guidance: Mark each performance measure either GO or NO GO. The soldier

must complete all substeps to receive a GO for that measure. Mark the soldier GO if all

performance measures are passed. All measures must be marked GO to receive an overall GO

on the task. Mark the soldier NO GO if any performance measure is failed. If the soldier is

marked NO GO, show him what was done wrong and how to do it correctly.

References

Required

TC 34-212

TM 9-5895-681-10

TM 9-5895-681-CL

TM 9-5895-692-10 Vol. 1

TM 9-5895-692-10 Vol. 2

TM 9-5895-692-CL

Unit SOP

3-135

STP 34-96U14-SM-TG

Skill Level 3

Subject Area 1: EMPLACEMENT OPERATIONS

301-96U-3010

ASSIST WITH UNMANNED AERIAL VEHICLE (UAV) SITE SURVEY

Conditions: Given a mission, a unmanned aerial vehicle (UAV) system, map of proposed area

of operations (AO), associated materials, and TM 9-5895-681-10 (SHADOW) or TM 9-5895-

692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter)/TM 9-1425-691-10 (Hunter).

Standards: Assist with UAV site survey in accordance with airspace management products,

TC 1-201, unit standing operating procedures (SOPs), FM 57-38, and TM 9-5895-681-10

(Shadow) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter)/TM 9-1425-691-10

(Hunter).

Performance Steps

Assist with launch and recovery (L/R) site survey.

Assist in gathering resources for possible L/R site areas.

(1) Maps of the possible sites.

(2) Weather data.

(a) Prevailing winds of the area.

(b) Overall area cloud coverage.

(3) Geological data.

(a) Soil content.

(b) Soil density.

(4) Area population data.

(a) Total of populated areas (over fly hazards).

(b) Local facilities such as airports with controlled airspace.

Assist in researching resources for the following:

(1) Areas large enough to maneuver entire UAV baseline in for set up of L/R element

and staging of the forward control site.

(2) Area large enough for runway/launch area.

(3) Terrain obstacles for line of site with airborne UAV.

(4) Ingress and egress routes.

(5) Cover and concealment.

(6) Distance from L/R site to possible forward control sites.

(7) Distance from L/R site to furthest mission objective.

(8) Lines of communications.

3-136

MOS/Skill Level Tasks-Skill Level 3

Performance Steps

Assist with forward control site survey.

Assist in gathering resources for possible forward control site areas.

(1) Maps of the possible sites.

(2) Weather data.

(a) Prevailing winds of the area.

(b) Overall area cloud coverage.

(d) Annual rainfall.

(3) Geological data.

(a) Soil content.

(b) Soil density.

(4) Area population data.

(a) Total of populated areas (over fly hazards).

(b) Local facilities such as airports with controlled airspace.

Assist in researching resources for the following:

(1) Terrain obstacles for line of site with airborne UAV.

(2) Ingress and egress routes.

(3) Cover and concealment.

(4) Distance from forward control sites to possible L/R sites.

(5) Distance from forward control site to furthest mission objective.

(6) Lines of communications.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Assisted with L/R site survey.

——

a. Assisted in gathering resources for possible L/R site areas.

b. Assisted in researching resources.

2. Assisted with forward control site survey.

——

a. Assisted in gathering resources for possible forward control site areas.

b. Assisted in researching resources.

3-137

MOS/Skill Level Tasks-Skill Level 3

301-96U-3011

DIRECT UNMANNED AERIAL VEHICLE (UAV) LAUNCH AND RECOVERY (L/R) SITE

EMPLACEMENT

Conditions: Given a launch and recovery (L/R) site, layout plan, unmanned aerial vehicle

(UAV) system, associated equipment, and TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10

(Hunter).

Standards: Direct UAV L/R site emplacement in accordance with local standing operating

procedures (SOPs), and TM 9-5895-681-10 (Shadow) or TM 9-1425-691-10 (Hunter).

Performance Steps

1. Receive emplacement orders from local/higher command.

2. Assign emplacement team (non-commissioned officers in charge) NCOICs.

a. Assign a NCOIC for the shelters and antennas.

b. Assign a NCOIC for the runway/launch area.

c. Assign a NCOIC for the maintenance area.

3. Direct emplacement. Verify that emplacement is performed in accordance with tasks:

301-96U-1012S, 301-96U-1013H, 301-96U-1014H, 301-96U-1015, 301-96U-1016S,

301-96U-1018, 301-96U-1019S, 301-96U-1026H, 301-96U-1027S, 301-96U-1028S,

301-96U-1029S, 301-96U-1030H, 301-96U-1031H, 301-96U-1032, and 301-96U-1033.

4. Perform final inspection.

a. Ensure that equipment is emplaced properly.

b. Ensure an inventory of all equipment is conducted.

c. Ensure that equipment is prepared for power-up.

d. Report back to local/higher command with status of site emplacement.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received emplacement orders from local/higher command.

——

2. Assigned emplacement team NCOICs.

——

3. Directed emplacement.

——

4. Performed final inspection.

——

3-139

MOS/Skill Level Tasks-Skill Level 3

301-96U-3012

DIRECT UNMANNED AERIAL VEHICLE (UAV) FORWARD CONTROL SITE

EMPLACEMENT

Conditions: Given an unmanned aerial vehicle (UAV) system, associated equipment, site plan,

and TM 9-5895-681-10 (SHADOW) or TM 9-1425-691-10 (Hunter).

Standards: Direct UAV forward control site emplacement in accordance with unit standing

operating procedures (SOPs), and TM 9-5895-681-CL (Shadow) or TM 9-1425-691-10 (Hunter).

Performance Steps

1. Receive emplacement orders from local/higher command.

2. Assign emplacement team (non-commissioned officers in charge) NCOICs.

a. Assign an NCOIC for the shelters and antennas.

b. Assign an NCOIC for the remote video terminal (RVT) and antennas (if used onsite).

3. Direct emplacement. Verify that emplacement is performed in accordance with tasks:

301-96U-1014H, 301-96U-1015, 301-96U-1016S, 301-96U-1018, 301-96U-1019S, and

301-96U-1032.

4. Perform final inspection.

a. Ensure that equipment is emplaced properly.

b. Ensure an inventory of all equipment is conducted.

c. Ensure that equipment is prepared for power-up.

d. Report back to local/higher command with status of site emplacement.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received emplacement orders from local/higher.

——

2. Assigned emplacement team NCOICs.

——

3. Directed emplacement.

——

4. Performed final inspection.

——

3-141

MOS/Skill Level Tasks-Skill Level 3

Subject Area 2: FLIGHT/MISSION OPERATIONS

301-96U-3061

DIRECT UNMANNED AERIAL VEHICLE (UAV) MISSION PLANNING

Conditions: Given a mission, current situation, airspace management products, an operational

control station with associated equipment and materials, and TM 9-5895-681-CL (Shadow) or

TM 9-5895-692-CL (Hunter).

Standards: Direct UAV mission planning in accordance with mission requirements, local

standing operating procedures (SOPs), TC 1-201, TC 34-212, FM 3-52, TM 9-5895-681-10

(Shadow) or TM 9-5895-692-10-1 (Hunter)/TM 9-5895-692-10-2 (Hunter).

Performance Steps

1. Receive mission from local/higher command.

a. Verify availability of a UAV for the mission.

b. Verify the configuration of the UAV matches the mission requirements.

c. Verify the weather is checked for the area and time of mission.

d. Verify an appropriate AVO/MPO for the mission has been selected.

2. Direct mission planning. Verify that the mission plan is performed in accordance with task

301-96U-1067.

3. Perform final inspection.

a. Verify that the UAV is set-up properly.

b. Verify that the mission is set-up properly.

c. Report back to local/higher command with status of the mission.

Evaluation Preparation: Provide the soldier with the materials listed in the condition

statement.

Performance Measures

NO GO

1. Received mission from local/higher command.

——

2. Directed mission planning.

——

3. Performed final inspection.

——

3-143

Military reference books and manuals (2009-2023, Volume 7) - page 4