Nissan Qashqai (2007-2010). Manual - part 738

BRC-150

< COMPONENT DIAGNOSIS >

[ESP/TCS/ABS]

BRAKE WARNING LAMP

BRAKE WARNING LAMP

Description

INFOID:0000000000924907

×

: ON –: OFF

NOTE:

• 1: Brake warning lamp will turn on in case of parking brake operation (when switch is ON) or of brake fluid level switch operation

(when brake fluid is insufficient).

• 2: After starting engine, brake warning lamp is turned off.

Component Function Check

INFOID:0000000000924908

1.

BRAKE WARNING LAMP OPERATION CHECK 1

Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Go to diagnosis procedure. Refer to 

BRC-150, "Diagnosis Procedure"

.

2.

BRAKE WARNING LAMP OPERATION CHECK 2

Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the park-
ing brake pedal.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Check parking brake switch. Refer to 

BRC-145, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000000924909

1.

CHECK PARKING BRAKE SWITCH

Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the park-
ing brake pedal.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check parking brake switch. Refer to 

BRC-145, "Diagnosis Procedure"

.

2.

CHECK SELF-DIAGNOSIS

Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to 

BRC-96, "CONSULT-III Function

(ABS)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Check items displayed by self-diagnosis.

3.

CHECK COMBINATION METER

Check if the indication and operation of combination meter are normal. Refer to 

MWI-21, "Diagnosis Descrip-

tion"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit).

NO

>> Repair or replace combination meter.

Condition

Brake warning lamp 

NOTE 1

Ignition switch OFF

–

For 1 second after turning ON ignition switch

×

 

NOTE 2

1 second later after turning ON ignition switch

×

 

NOTE 2

EBD function is malfunctioning.

×

ESP OFF INDICATOR LAMP

BRC-151

< COMPONENT DIAGNOSIS >

[ESP/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

ESP OFF INDICATOR LAMP

Description

INFOID:0000000000924910

×

: ON –: OFF

Component Function Check

INFOID:0000000000924911

1.

ESP OFF INDICATOR LAMP OPERATION CHECK 1

Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Go to diagnosis procedure. Refer to 

BRC-151, "Diagnosis Procedure"

.

2.

ESP OFF INDICATOR LAMP OPERATION CHECK 2

Check that the ESP OFF indicator lamp in the combination meter turns ON/OFF correctly when operating the
ESP OFF switch.
Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Check ESP OFF switch. Refer to 

BRC-147, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000000924912

1.

CHECK SELF-DIAGNOSIS

Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to 

BRC-96, "CONSULT-III Function

(ABS)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check items displayed by self-diagnosis.

2.

CHECK ESP OFF SWITCH

Check that the ESP OFF indicator lamp in the combination meter turns ON/OFF correctly when operating the
ESP OFF switch.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Check ESP OFF switch. Refer to 

BRC-147, "Diagnosis Procedure"

.

3.

CHECK COMBINATION METER

Check if the indication and operation of combination meter are normal. Refer to 

MWI-21, "Diagnosis Descrip-

tion"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit).

NO

>> Repair or replace combination meter.

Condition

ESP OFF indicator lamp

Ignition switch OFF

–

For 1 second after turning ON ignition switch

×

1 second later after turning ON ignition switch

–

ESP OFF switch turned ON. (ESP function is OFF.)

×

ESP/TCS function is malfunctioning.

×

ABS function is malfunctioning.

×

EBD function is malfunctioning.

×

BRC-152

< COMPONENT DIAGNOSIS >

[ESP/TCS/ABS]

SLIP INDICATOR LAMP

SLIP INDICATOR LAMP

Description

INFOID:0000000000924913

×

: ON –: OFF

Component Function Check

INFOID:0000000000924914

1.

CHECK SLIP INDICATOR LAMP OPERATION

Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.
Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Go to diagnosis procedure. Refer to 

BRC-152, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000000924915

1.

CHECK SELF-DIAGNOSIS

Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to 

BRC-96, "CONSULT-III Function

(ABS)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check items displayed by self-diagnosis.

2.

CHECK COMBINATION METER

Check if the indication and operation of combination meter are normal. Refer to 

MWI-21, "Diagnosis Descrip-

tion"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit).

NO

>> Repair or replace combination meter.

Condition

SLIP indicator lamp

Ignition switch OFF

–

For 1 second after turning ON ignition switch

×

1 second later after turning ON ignition switch

–

VDC/TCS function is malfunctioning.

×

ABS function is malfunctioning.

×

EBD function is malfunctioning.

×

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

BRC-153

< ECU DIAGNOSIS >

[ESP/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

ECU DIAGNOSIS

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

Reference Value

INFOID:0000000000924916

VALUES ON THE DIAGNOSIS TOOL

CAUTION:

The display shows the control unit calculation data, so a normal value might be displayed even in the
event the output circuit (harness) is open or short-circuited.

 Monitor item

Condition

Value/Status

FR LH SENSOR

Wheel speed

Vehicle stopped

0 [km/h (MPH)]

Vehicle running 

NOTE 1

Nearly matches the 

speed meter display 

(

±

 10% or less)

FR RH SENSOR

Wheel speed

Vehicle stopped

0 [km/h (MPH)]

Vehicle running 

NOTE 1

Nearly matches the 

speed meter display 

(

±

 10% or less)

RR LH SENSOR

Wheel speed

Vehicle stopped

0 [km/h (MPH)]

Vehicle running 

NOTE 1

Nearly matches the 

speed meter display 

(

±

 10% or less)

RR RH SENSOR

Wheel speed

Vehicle stopped

0 [km/h (MPH)]

Vehicle running 

NOTE 1

Nearly matches the 

speed meter display 

(

±

 10% or less)

STOP LAMP SW

Stop lamp switch signal status

When brake pedal is depressed

ON

When brake pedal is not depressed

OFF

BATTERY VOLT

Battery voltage supplied to the ABS actuator 
and electric unit (control unit)

Ignition switch ON

10 – 16 V

GEAR

Gear position determined by TCM

1st gear 
2nd gear
3rd gear
4th gear
5th gear
6th gear

1
2
3
4
5
6

 SLCT LVR POSI

Selector lever position

P position
R position
N position
D position

P
R
N
D

OFF SW

ESP OFF switch ON/OFF

ESP OFF switch ON
(When ESP OFF indicator lamp is ON)

ON

ESP OFF switch OFF
(When ESP OFF indicator lamp is OFF)

OFF

YAW RATE SEN

Yaw rate detected by yaw rate/side G sensor

When vehicle stop

Approx. 0 

°

/s

When vehicle turning

−

75 to 75 

°

/s

ACCEL POS SIG 

Throttle actuator opening/closing is displayed 
(linked with accelerator pedal)

Accelerator pedal not depressed (igni-
tion switch is ON)

0 %

Depress accelerator pedal (ignition 
switch is ON)

0 - 100 %