|
|
|
Content .. 1070 1071 1072 1073 ..
SUPER LOCK ACTUATOR DLK-367 < COMPONENT DIAGNOSIS > [WITH I-KEY & SUPER LOCK] C D E F G H I J L M A B DLK N O P SUPER LOCK ACTUATOR DRIVER SIDE DRIVER SIDE : Description INFOID:0000000001097264 The super lock system is controlled by BCM. DRIVER SIDE : Component Function Check INFOID:0000000001097265 1. CHECK FUNCTION With CONSULT-III Check “SUPER LOCK” in Active test mode with CONSULT-III. Is the inspection result normal? YES >> Door lock actuator (super lock actuator) is OK. NO >> Refer to DLK-367, "DRIVER SIDE : Diagnosis Procedure" . DRIVER SIDE : Diagnosis Procedure INFOID:0000000001097266 1. CHECK OUTPUT SIGNAL Check voltage between BCM connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK SUPER LOCK ACTUATOR CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect BCM and front door lock actuator (driver side) connector. 3. Check continuity between BCM connector and front door lock actuator (driver side) connector. 4. Check continuity between BCM connector and ground. Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-39, "Intermittent Incident" . NO >> Repair or replace harness. Test item Condition SUPER LOCK :LOCK (SET) The super lock actuator is locked (SET) :UNLOCK (RELEASE) The super lock actuator is unlocked (RELEASE) Terminals Condition Voltage (V) (Approx.) (+) (–) BCM connector Terminal M67 60 Ground UNLOCK (RELEASE) 0 → Battery voltage → 0 59 LOCK (SET) BCM connector Terminal Door lock actuator connector Terminal Continuity M67 59 D29 1 Exists 60 2 BCM connector Terminal Ground Continuity M67 59 Does not exist 60 |