Lexus LX600 (2023 year). Manual in english

122

3-3. Adjusting the seats

■

Using the driver’s seat adjustment
switches to adjust the front passen-
ger’s seat (front passenger mode)

The mode of the driver’s seat adjust-
ment switches can be changed to
adjust the front passenger’s seat.

Press the mode change button on
the driver’s side door.

The indicator

will illuminate when front

WARNING

■

When adjusting the seat position

●

Take care when adjusting the seat

position to ensure that other passen-

gers are not injured by the moving

seat.

●

Do not put your hands under the seat

or near the moving parts to avoid

injury.

Fingers or hands may become

jammed in the seat mechanism.

●

Make sure to leave enough space

around the feet so they do not get

stuck.

●

Do not allow the front passenger seat

to touch the ceiling or sun visor. If the

front passenger seat touch the ceiling

or sun visor, the SRS airbags may not

properly operate, resulting in death or

serious injury.

■

Seat adjustment

To reduce the risk of sliding under the lap

belt during a collision, do not recline the

seat more than necessary.

If the seat is too reclined, the lap belt may

slide past the hips and apply restraint

forces directly to the abdomen, or your

neck may contact the shoulder belt,

increasing the risk of death or serious

injury in the event of an accident.

Adjustments should not be made while

driving as the seat may unexpectedly

move and cause the driver to lose con-

trol of the vehicle.

■

Operating the front passenger’s seat

from the driver’s seat or rear seat (4-

passenger models)

Do not operate the front passenger’s

seat when a passenger is seated in it. In

addition, do not let anyone sit down in the

front passenger’s seat while the seat is

being operated or when the head

restraint is being folded. The front pas-

senger may catch their legs between the

instrument panel and seat, or the head

restraint may interfere with their head,

resulting in injury.

■

When the front passenger’s seat is

folded forward (4-passenger models)

If the outside rear view mirror is difficult

to see, due to the position of the front

passenger’s seat, move the front passen-

ger’s seat to an appropriate position.

Doing so may lead to mishandling of the

vehicle and cause an accident, resulting

in death or serious injury.

NOTICE

■

Operating the front passenger’s seat

from the driver’s seat or rear seat (4-

passenger models)

Before operating the front passenger’s

seat, make sure that there is no luggage

or any other objects on the seat or in the

footwell that could prevent its operation.

Such items may result in excess force

being applied, causing damage to the

seat and/or the luggage.

Operating the front passenger’s
seat from the driver’s seat (4-
passenger models)

123

3-3. Adjusting the seats

fore
dri
ving

passenger mode is selected.

Using the seat adjustment switches
on the driver’s seat, adjust the front
passenger’s seat.

To cancel front passenger mode, press the

mode change button again.
Front passenger mode will be canceled

automatically if the driver’s seat adjustment

switches are not operated for approxi-

mately 30 seconds.

■

Using the Multimedia Display

Select

on the Main menu.

Select “Seat controls”.

Select “Arrangement”.

Select the passenger’s seat.

Select the button for the desired
operation.

Move the front passenger’s seat
forward and fold the seatback and
head restraint. (extra front)

Move the front passenger’s seat

rearward and the seatback and
head restraint to the upright posi-
tion.

To stop the front passenger’s seat while it is
moving, select the

passenger’s

seat operation button or press the seat
switch.

Folds the rear display

Press it again to extend them to the original
position.

■

Operating the foldable head restraint

using the front passenger’s seat adjust-

ment switches

When the front passenger’s head restraint

is folded forward and the front passenger’s

door is open, if the front passenger’s seat

adjustment switches are used to move the

seat backward or recline the seatback, the

head restraint will move to the upright posi-

tion automatically when the switch is

released.
To stop the operation of the front passen-

ger’s head restraint part-way, perform any

of the following operations:

●

Operate any front passenger’s seat

adjustment switch.

●

Press the “SET” button.

●

Press the “1”, “2” or “3” button.

●

Press the seat switch.

■

Operation of the front passenger’s seat

using the Multimedia Display will be

canceled when

In the following situations, the front passen-

ger’s seat cannot be operated using the

Multimedia Display:

●

The engine switch is in ACC or OFF.

●

The weight of an occupant or heavy

object, etc. is detected on the front pas-

senger’s seat.

Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the engine switch is turned off.

124

3-3. Adjusting the seats

●

The front passenger’s seat belt is fas-

tened.

●

The front passenger’s door is open. (The

front seat will not move forward.)

Display the home screen on the
Rear Multi Operation Panel
(



P.381) and then select “Seat”.

Select “Passenger”.

Select the button for the desired
operation.

When the operating conditions are not

met, the buttons will be grayed out.

Adjust the angle of the front pas-
senger’s seat seatback

The seatback will move while a button is
touched and held.

Move the front passenger’s seat
forward or backward

The seat will move while a button is
touched and held.

Folds the rear display

Press it again to extend them to the original
position.

Move the front passenger’s seat
forward and fold the seatback for-

ward.

The head restraint will also fold forward.
To stop the front passenger seat while it is
moving, touch “STOP”.

Move the front passenger’s seat
backward and the seatback to the
upright position.

The head restraint will also move to the
upright position.

■

Operating the front passenger’s seat

from the rear seat

●

In the following situations, the front pas-

senger’s seat cannot be operated using

the Rear Multi Operation Panel:

• The engine switch is in ACC or OFF.

• The weight of an occupant or heavy

object, etc. is detected on the front pas-

senger’s seat.

Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the engine switch is turned off.
• The front passenger’s seat belt is fas-

tened.

• The front passenger’s door is open. (The

front seat will not move forward.)

Operating the front passenger’s
seat from the rear seat (4-pas-
senger models)

125

3-3. Adjusting the seats

fore
dri
ving



Second seat

Pull the lever and adjust the seatback



Third seat (if equipped)

Press the switch and adjust the seat-
back

■

Folding down second center seatback

Pull the center seatback lock release lever

behind the seatback and fold it down.
To return the center seatback to its original

position, lift it up until it locks.

Rear seats (5-passenger and
7-passenger models)

The reclining angle can be adjusted
and the seatback can be folded by
operating the lever or switch.

Adjustment procedure

WARNING

■

When folding the seatbacks down

Observe the following precautions.
Failure to do so may result in death or

serious injury.

●

Do not fold the seatbacks down while

driving.

●

Stop the vehicle on level ground, set

the parking brake and shift the shift

lever to P.

●

Do not allow anyone to sit on a folded

seatback or in the luggage compart-

ment while driving.

●

Do not allow children to enter the lug-

gage compartment.

■

Adjusting the reclining angle

Do not fold the seatback more than

required. During a collision, your body

could slip beneath the seat belt resulting

in extreme pressure being applied to

your abdomen, or the shoulder belt

could wrap around your neck, which may

result in death or serious injury.

NOTICE

■

When operating the rear seat

●

Be careful that your hands and legs do

not get caught in moving parts or con-

nection areas.

●

Do not arrange seats while they are

occupied.

126

3-3. Adjusting the seats

For easy access to the third seat, per-
form

in “Tumbling the second seats”.

(



P.126, 127)

■

Before tumbling the second seats

Stow the seat belt buckles and
lower the head restraints to the
lowest position.

Use the band to secure the center seat

buckle.

Pass the outer seat belts through
the seat belt hangers and secure
the seat belt plates.

This prevents the shoulder belt from being

damaged.
Make sure that the seat belts are removed

from the hangers before using them.

■

Tumbling the second seats (manual
type)

Pull the lever

The seatback is folded forward and the

seat springs up.

Left-hand side seat only: Open the
cover and then attach the hook to
the assist grip to prevent the seat
from moving

When entering and exiting the
third seat (if equipped)

When tumbling the second seats

127

3-3. Adjusting the seats

fore
dri
ving

Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.

■

Tumbling the second seats (power
type)

Press and hold the switch

The front seat will move forward and stop.

When the operation has been stopped,

release the switch.

After the front seat has stopped,
release the switch.

The seatback is folded forward and the

seat springs up.

Left-hand side seat only: Open the
cover and then attach the hook to
the assist grip to prevent the seat
from moving

Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.

128

3-3. Adjusting the seats

■

The second seats (power type) can be

operated when

When the engine switch is OFF, or ON

with the shift lever in P.

■

When tumbling the second seat (power

type)

●

In the following situations, the second

seat does not tumble properly and oper-

ation stops.

• The seatback is folded forward

• The center seat is folded forward

• The armrest is being used

●

If an object is placed on the seat cushion,

the tumbling operation may stop.

Left-hand side seat only: Detach
the hook from the assist grip

If detaching from the assist grip is difficult,

loosen the belt.

WARNING

■

When stowing the second seat

Observe the following precautions.

Failure to do so may result in death or

serious injury.

●

Check that there is no luggage and

that there are no other people around

the seat before stowing operation.

●

Do not insert hands or feet into the

moving parts of the seat.

●

Do not allow children to operate the

seat.

■

When tumbling the second seat

●

Do not sit on or place anything on the

seatback while driving.

●

Be sure to install the seat hook covers

on the seat hooks, or you may get

burned when they become hot.

●

Do not tumble the second seat with

any electrical devices left connected

to the accessory outlet or charging

USB port on the rear of the console

box. The second seat could strike the

electrical device and damage it.

●

Left-hand side seat only: Be sure to

secure the seat using the hook after

tumbling the second seat. If the seat is

not secured, the seat may return while

driving, resulting in serious injury.

●

Right-hand side seat only: Do not drive

the vehicle with the seat tumbled. If the

second seat interferes with the front

seat, the SRS airbag may not deploy

properly or may incorrectly deploy,

resulting in death or serious injury.

Returning the second seat to its
original position

129

3-3. Adjusting the seats

fore
dri
ving

Left-hand side seat only: Stow the
hook and tumble band, and then
close the cover

Return the seat to its original posi-
tion.

Push the seat until it is locked.

Lift the seatback.

Lift it until it is locked.
Power type: return the front seat to the

original position. When a front seat is close

to a second seat, the operation of the front

seat may be restricted.

■

If you cannot raise the seatback

Pushing on the lower front edge of the
seatback to slacken the seat belt.

Let the seat belt retract a little.

WARNING

■

When returning the seat to its origi-

nal position

●

Make sure the seat legs are securely

latched to the floor when putting back

the seats.

130

3-3. Adjusting the seats

Left seat return switch

Left seat stow switch

Right seat return switch

Right seat stow switch

Operation can also performed using both
the seat and back door switches.

■

The third power seats can be operated

when

When the engine switch is OFF, or ON

with the shift lever in P

■

Switch operation

●

Do not release the switch while the third

seat is operating. Releasing the switch

will cause the seat to stop operating and

will sound a (continuous) buzzer. Press

the switch again to stop the buzzer.

●

If the third seat is close to the second seat

or other surrounding parts, third seat

movement may be restricted.

■

If the warning buzzer sounds continu-

ously

If a system malfunction occurs, the warning

buzzer may continue to sound while the

engine switch is on. In this case, perform the

following.

Press and hold the return switch on the

back door

Press the stow switch on the seat 5

times within 10 seconds, and check that

the buzzer sounds 3 times (do not

release the return switch on the back

door until the buzzer sounds 3 times)

Press and hold the return switch on the

seat or back door

After the seat is stowed, the warning buzzer

will stop.
If the malfunction does not disappear even

after performing this procedure above,

have the vehicle inspected by your Lexus

dealer.

■

Before stowing the third seats

Pass the seat belts through the seat
belt hangers and secure the seat
belt plates.

This prevents the shoulder belt from being

damaged.
Make sure that the seat belts are removed

WARNING

●

When returning the second seat to the

original position, be careful not to get

your hand or foot of the third seat pas-

sengers caught between the second

seat and the floor.

■

After returning the seat to its original

position

●

After returning the seat to its original

position, gently shake it to the front

and rear and check that it is secure

●

Do not pinch the seat belt

●

Make sure that the seat belt is

removed from the hanger as before

Third power seat control
switches (if equipped)

When stowing the third seat (if
equipped)

131

3-3. Adjusting the seats

fore
dri
ving

from the hangers before using them.

Adjust the seatback of the second
seat so that it does not interfere
with the third seat. (



P.125)

■

Stowing the third seat

Press and hold the stow switch to stow
the third seat

After the buzzer sounds twice, the seat-
back will be folded down and the head
restraint and seat cushion will be automati-
cally stowed in the floor.
When the seat has been stowed, the
buzzer will sound twice and operation will
be automatically stopped. When the oper-
ation has been stopped, release the switch.

Push and hold the return switch to
return the third seats.

After the buzzer sounds twice, the seat-

back and seat cushion will be started to

move. Make sure not to release the switch

before the operation has completed.
When the seat has been returned, the

buzzer will sound twice and operation will

be automatically stopped. When the oper-

WARNING

■

When stowing the third seats

Observe the following precautions.
Failure to do so may result in death or

serious injury.

●

Check that there is no luggage and

that there are no other people around

the seat before stowing operation.

●

Do not insert hands or feet into the

moving parts of the seat.

●

Do not allow children to operate the

seat.

●

Do not use the seat if only the seat

cushion has been stowed.

NOTICE

■

When stowing the third seats

If there is the luggage cover attached to

the vehicle, remove the luggage cover.

(



P.416) The third seat could strike the

luggage cover and damage it.

Returning the third seat (if
equipped) to its original position

132

3-3. Adjusting the seats

ation has been stopped, release the switch.

Lift the head restraint

Auto arrangement switch

Third seat return switch (left side)

Third seat stow switch (left side)

Second seat switch (left side)

Third seat return switch (right side)

Third seat stow switch (right side)

Second seat switch (right side)

The switches equipped differ depend-
ing on the model or options.

■

Operating the second seat

Press and hold the second seat switch

The seatback is folded forward.
When returning the second seat to the
original position:



P.128

WARNING

■

After returning the seat to its original

position

●

Do not pinch the seat belt

●

Make sure that the seat belt is

removed from the hanger as before

●

Lift the head restraint to its original

position

Luggage compartment control
switches (if equipped)

133

3-3. Adjusting the seats

fore
dri
ving

■

Operating the third seat



P.130

■

Stowing the second and third seat

Press and hold the auto arrangement
switch

Stowing the second and third seat.
When returning the seat to the original
position:



P.128, 131

■

The third power seats can be operated

when



P.130

■

Switch operation



P.130

■

If the warning buzzer sounds continu-

ously



P.130

134

3-3. Adjusting the seats

■

Automatic operation

The seat can be moved to preset posi-
tions.

Display the home screen on the
Rear Multi Operation Panel
(



P.381) and then select “Seat”.

Select “Left” or “Right”.

Select the desired preset button.

When the operating conditions are not

met, the preset buttons will be grayed out.

Fold forward the seatback of the

Rear seat (4-passenger
models)

WARNING

■

When adjusting the seat position

●

Take care when adjusting the seat

position to ensure that other passen-

gers are not injured by the moving

seat.

●

When adjusting the rear seat with an

ottoman, make sure there is sufficient

space so that a foot does not get

caught between the ottoman and front

passenger seat.

■

Seat adjustment

To reduce the risk of sliding under the lap

belt during a collision, do not recline the

seat more than necessary.

If the seat is too reclined, the lap belt may

slide past the hips and apply restraint

forces directly to the abdomen, or your

neck may contact the shoulder belt,

increasing the risk of death or serious

injury in the event of an accident.

Adjustments should not be made while

driving as the seat may unexpectedly

move and cause the driver to lose con-

trol of the vehicle.

■

Using the ottoman

●

Do not sit on the ottoman.

If someone sits on the ottoman, the seat
belt cannot be fitted properly, and they
may be thrown from the seat, resulting in
death or serious injury in the event of a
sudden stop, sudden swerve or accident.

●

When getting in or out of the vehicle,

retract the ottoman. If the ottoman is

not retracted, it may cause a fall,

resulting in injury.

●

Do not operate the ottoman when the

vehicle is moving.

●

Do not allow anyone to put their hands

or feet under the rear seat when stow-

ing the ottoman.

NOTICE

■

To prevent an ottoman malfunction

●

Do not place any objects in the rear

seat footwell that could prevent the

operation of the ottoman.

●

Do not place heavy luggage on the

ottoman.

●

Do not place any objects under the

ottoman while it is raised for use. These

objects may interfere with the ottoman

being folded, causing damage to the

ottoman or the objects themselves.

■

To prevent a rear display malfunction

(rear seat with ottoman)

Do not attempt to move the rear display

by hand, as doing so may damage the

rear display.

Adjustment procedure

135

3-3. Adjusting the seats

fore
dri
ving

seat with ottoman, and then fold the
seatback of the rear seat (relax
mode)

The seat with ottoman moves forward, and
the head restraint also folds forward.
To stop the front passenger seat while it is
moving, touch “STOP”.

Moves the rear seat to the upright
position (Business Mode)

Folds the rear display (rear seat
with ottoman)

Press it again to extend them to the original
position.

■

Manual operation

Display the home screen on the
Rear Multi Operation Panel
(



P.381) and then select “Seat”.

Select “Left” or “Right”.

Select the button for the desired
adjustment.

Seatback angle adjustment

Seat cushion (front) angle adjust-
ment

Ottoman angle adjustment (if
equipped)

Seat position adjustment (front pas-
senger’s seat)

Seat position adjustment (rear seat)
(if equipped)

The part will move while a button is
touched.

■

Operating conditions of Business Mode

When the rear seat belt is fastened, Busi-

ness Mode cannot be selected.

■

The rear seat with an ottoman cannot be

moved to Relaxation Mode when

In the following situations, Relaxation Mode

cannot be selected:

●

The engine switch is in ACC or OFF.

●

The weight of an occupant or heavy

object, etc. is detected on the front pas-

senger’s seat.

Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the engine switch is turned off.

●

The front passenger’s seat belt is fas-

tened.

●

The front passenger’s door is open.

■

Pre-collision seatbacks for the passen-

ger seats



P.220

Select

on the Main menu.

Select “Seat controls”.

Select “Arrangement”.

Select the rear seat.

Select “Return”.

The rear seat will move to the upright posi-

A
B

Returning the rear seat from the
front seats

136

3-3. Adjusting the seats

tion.

■

Operation of the rear seats from the

front seats

In the following situations, the rear seats

cannot be operated from the front seats.

●

When the weight of an occupant, heavy

object, etc. is detected on a rear seat

Once weight is detected on the seat, the
seat will be judged as occupied until a rear
door is opened then closed or the engine
switch is turned off and the doors are
locked.

●

When the rear seat belt is fastened.

The rear seat relaxation system utilizes
pneumatic chambers, and applies
pressure to the occupant’s body at dif-
ferent modes and intensities.
To display the rear seat relaxation sys-
tem screen, display the home screen
on the Rear Multi Operation Panel
(



P.381) and then select “Relax-

ation”.

Touch to select the desired rear
seat.

Touch to select the desired mode.

When a button is touched, operation will
begin.

Touch to adjust the intensity.

The intensity can be adjusted in 5 steps.

Touch to stop the operation.

If a seat is not occupied, do not operate the
rear seat relaxation system for that seat.

■

Relaxation system

●

Operating conditions

• The engine switch is in ON.

• The temperature in the cabin is not

extremely high.

• The weight of an occupant is detected on

the rear seat or the rear seat belt is fas-

tened.

Once weight is detected on the seat, the
seat will be judged as occupied until a rear
door is opened then closed or the engine
switch is turned off and the doors are
locked.

●

Automatic stop function

• The operation will be

canceled automati-

cally after approximately 15 minutes.

WARNING

■

When returning the rear seats to the

neutral position

To avoid injuring the rear passengers,

wait until they have gotten out of the

vehicle before operating the switch.

Rear seat relaxation system

137

3-3. Adjusting the seats

fore
dri
ving

■

Front seats (manual head
restraints) and outer second seats

Down

Push the head restraint down while press-

WARNING

■

Using the relaxation system

●

Those who are pregnant, have

recently given birth, or suffer from ail-

ments requiring rest (heart disease

etc.) should consult a doctor before

use.

●

Do not allow children to use the relax-

ation function.

●

Do not use immediately after consum-

ing a meal or alcohol, or for an

extended period of time.

●

If you feel sick while using the relax-

ation function, immediately discon-

tinue use.

Head restraints

Head restraints are provided for all
seats.

WARNING

■

Head restraint precautions

Observe the following precautions

regarding the head restraints.

Failure to do so may result in death or

serious injury.

●

Use the head restraints designed for

each respective seat.

●

Adjust the head restraints to the cor-

rect position at all times.

●

Manual head restraints: After adjust-

ing the head restraints, push down on

them and make sure they are locked in

position.

●

Do not drive with the head restraints

removed.

●

Vehicles with third seat: When sitting

on the third seat, make sure that the

head restraint is not folded.

Vertical adjustment

138

3-3. Adjusting the seats

ing the lock release button

■

Front seats (power head restraints)

Down

■

Second center seat (if equipped)

Down

Push the head restraint down while press-
ing the lock release button

■

Adjusting the height of the head

restraints (front and second seats)

Make sure that the head restraints are

adjusted so that the center of the head

restraint is closest to the top of your ears.



Manual head restraints

The position of the head restraint can
be adjusted forward in 4 stages.

If the head restraint is pulled forward from
the foremost position, it will return to the
rearmost position.



Power head restraints

Forward

Backward

Folding the head restraint

Fold the head restraint while pulling the
strap.
To return the head restraint, pull it up.

Horizontal adjustment (if
equipped)

Folding the head restraint (third
seats) (if equipped)

139

3-3. Adjusting the seats

fore
dri
ving

■

Front seats (manual head
restraints) and outer second seats

Pull the head restraint up while press-
ing the lock release button

If the head restraint touches the ceiling,
making the removal difficult, change the
seat height or angle. (



P.121, 125, 134)

■

Second center seat (if equipped)

Pull the head restraint up while press-
ing the lock release button

If the head restraint touches the ceiling,
making the removal difficult, change the
seat angle. (



P.125)

■

Front seats (power head restraints)
and third seats (if equipped)

The head restraint cannot be removed.

■

Front seats (manual head
restraints) and outer second seats

Align the head restraint with the instal-
lation holes and push it down to the
lock position.

Press and hold the lock release button

when lowering the head restraint.

■

Second center seat (if equipped)

Align the head restraint with the instal-
lation holes and push it down to the
lock position.

Press and hold the lock release button

when lowering the head restraint.

Removing the head restraints

Installing the head restraints

141

3-4. Adjusting the steering wheel and mirrors

fore
dri
ving

3-4.Adjusting the steering wheel and mirrors

Operating the switch moves the steer-
ing wheel in the following directions:

Down

Toward the driver

Away from the driver

■

Steering wheel can be adjusted when

The engine switch is in ACC or ON

: If the driver’s seat belt is fastened, the

steering wheel can be adjusted regard-
less of engine switch mode.

■

Power easy access system

The steering wheel and driver’s seat move

in accordance with engine switch mode and

the driver’s seat belt condition. (



P.159)

■

Automatic adjustment of the steering

position

A desired steering position can be entered

to memory and recalled automatically by

the driving position memory system.

(



P.160)

When the engine switch is turned off,
the steering wheel returns to its stowed
position by moving up and away to
enable easier driver entry and exit.

Turning the engine switch to ACC or ON
will return the steering wheel to the origi-
nal position.

To sound the horn, press on or close to
the

mark.

Steering wheel

Adjustment procedure

WARNING

■

Caution while driving

Do not adjust the steering wheel while

driving.
Doing so may cause the driver to mis-

handle the vehicle and cause an acci-

dent, resulting in death or serious injury.

Auto tilt away

Sounding the horn

142

3-4. Adjusting the steering wheel and mirrors

: If equipped

The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.

Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced.
Changing automatic anti-glare func-
tion mode ON/OFF

When the automatic anti-glare function is
in ON mode, the indicator

illuminates.

The function will be set to ON mode each
time the engine switch is turned to ON.
Pressing the button turns the function to
OFF mode. (The indicator

also turns

off.)

■

To prevent sensor error

To ensure that the sensors operate prop-

erly, do not touch or cover them.

Inside rear view mirror

The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.

Adjusting the height of rear view
mirror

WARNING

■

Caution while driving

Do not adjust the position of the mirror

while driving.

Doing so may lead to mishandling of the

vehicle and cause an accident, resulting

in death or serious injury.

Anti-glare function

143

3-4. Adjusting the steering wheel and mirrors

fore
dri
ving

: If equipped

Camera indicator

Indicates that the camera is operating nor-
mally.

Icon display area

Displays icons, adjusting gauge, etc.
(



P.145)

Select/adjust button

Press to change the setting of the item you
want to adjust.

Menu button

Press to display the icon display area and
select the item you want to adjust.

Lever

Operate to change between digital mirror
mode and optical mirror mode.

Operate the lever to change between
digital mirror mode and optical mirror
mode.

Digital Rear-view Mirror

The Digital Rear-view Mirror is a
system that uses the camera on the
rear of the vehicle and displays its
image on the display of the Digital
Rear-view Mirror.
The Digital Rear-view Mirror can
be changed between optical mirror
mode and digital mirror mode by
operating the lever.
The Digital Rear-view Mirror
allows the driver to see the rear
view despite obstructions, such as
the head restraints or luggage,
ensuring rear visibility. Also, the
rear seats are not displayed and pri-
vacy of the passengers is enhanced.

WARNING

Observe the following precautions.

Failure to do so may result in death or

serious injury.

■

Before using the Digital Rear-view

Mirror

●

Make sure to adjust the mirror before

driving. (



P.144)

• Change to optical mirror mode and

adjust the position of the Digital Rear-

view Mirror so that the area behind

your vehicle can be viewed properly.

• Change to digital mirror mode and

adjust the display settings.

●

As the range of the image displayed by

the Digital Rear-view Mirror is differ-

ent from that of the optical mirror,

make sure to check this difference

before driving.

System components

Changing modes

144

3-4. Adjusting the steering wheel and mirrors

Digital mirror mode

Displays an image of the area behind the
vehicle.

will illuminate in this mode.

Optical mirror mode

Turns off the display of the Digital Rear-
view Mirror allows it to be used as an opti-
cal mirror.

■

Digital mirror mode operating condi-

tion

The engine switch is turned to ON.
When the engine switch is changed from

ON to OFF or ACC, the image will disap-

pear after several seconds.

■

When using the Digital Rear-view Mir-

ror in digital mirror mode

●

If it is difficult to see the displayed image

due to light reflected off the Digital Rear-

view Mirror, the camera being dirty or

covered with water droplets, dust, etc., or

if lights of a vehicle behind your vehicle or

the displayed image are bothering you,

change to optical mirror mode.

●

When the back door is open, the Digital

Rear-view Mirror image may not display

properly. Before driving, make sure the

back door is closed.

●

If the display is difficult to see due to

reflected light, close the sunshades for

the moon roof.

●

Any of the following conditions may

occur when driving in the dark, such as at

night. None of them indicates that a mal-

function has occurred.

• Colors of objects in the displayed image

may differ from their actual color.

• Depending on the height of the lights of

the vehicle behind, the area around the

vehicle may appear white and blurry.

• Automatic image adjustment for brighter

surrounding image may cause flickering.

If it is difficult to see the displayed image or

flickering bothers you, change to optical

mirror mode.

●

The Digital Rear-view Mirror may

become hot while it is in digital mirror

mode. This is not a malfunction.

●

Depending on your physical condition or

age, it may take longer than usual to

focus on the displayed image. In this case,

change to optical mirror mode.

●

Do not let passengers stare at the dis-

played image when the vehicle is being

driven, as doing so may cause motion

sickness.

■

When the system malfunctions

If the symbol shown in the illustration is dis-

played when using the Digital Rear-view

Mirror in digital mirror mode, the system

may be malfunctioning. The symbol will dis-

appear in a few seconds. Operate the lever,

change to optical mirror mode and have the

vehicle inspected by your Lexus dealer.

■

Adjusting the mirror height

The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Change to optical mirror mode,
adjusting the height of the rear view
mirror by moving it up and down.

Adjusting the mirror

145

3-4. Adjusting the steering wheel and mirrors

fore
dri
ving

■

Display settings (digital mirror
mode)

Settings of the display in the digital mir-
ror mode, on/off operation of the auto-
matic anti-glare function, etc. can be
changed.

Press the menu button.

The icons will be displayed.

Press the menu button repeatedly
and select the item you want to
adjust.

Press

change the setting.

The icons will disappear if a button is not

operated for approximately 5 seconds or

more.

: This is a function for the optical mirror

mode, however, the setting can also be
changed while using the digital mirror
mode.

■

Enabling/disabling the automatic
anti-glare function (optical mirror
mode)

The automatic anti-glare function in the
optical mirror mode can be
enabled/disabled. The setting can be
changed in both the digital mirror
mode and the optical mirror mode.



When using the digital mirror mode



P.145

Icons

Settings

Select to adjust the brightness of
the display.

Select to adjust the area displayed
up/down.

Select to adjust the area displayed
to the left/right.

Select to adjust the angle of the
displayed image.

Select to zoom in/out the dis-
played image.

Select to enable/disable the auto-
matic anti-glare function.

Responding to the brightness of
the headlights of vehicles behind,
the reflected light is automatically
adjusted.
The automatic anti-glare function
is enabled each time the engine
switch is changed to ON.

Select to display

HomeLink

Training Tutorial to

assist customers to train their
garage door opener system.
(



P.433)

Select to change the language of
the Homelink

Training Tutorial.

Icons

Settings

146

3-4. Adjusting the steering wheel and mirrors



When using the optical mirror
mode

Press the menu button.

The icons will be displayed.

Press

enable (ON)/disable (OFF) the
automatic anti-glare function.

The icons will disappear if a button is
not operated for approximately 5 sec-
onds or more.

■

Adjusting the display (digital mirror

mode)

●

The icons will disappear if a button is not

operated for approximately 5 seconds or

more.

●

If the displayed image is adjusted, it may

appear distorted. This is not a malfunc-

tion.

●

If the brightness of the Digital Rear-view

Mirror is set too high, it may cause eye

strain. Adjust the Digital Rear-view Mir-

ror to an appropriate brightness. If your

eyes become tired, change to optical

mirror mode.

●

The brightness of the Digital Rear-view

Mirror will change automatically accord-

ing to the brightness of the area in front of

your vehicle.

■

To prevent the light sensors from mal-

functioning

To prevent the light sensors from malfunc-

tioning, do not touch or cover them.

WARNING

Observe the following precautions.
Failure to do so may result in death or

serious injury.

■

While driving

●

Do not adjust the position of the Digital

Rear-view Mirror or adjust the display

settings while driving.

Stop the vehicle and operate the Digi-

tal Rear-view Mirror control switches.

Failure to do so may cause a steering

wheel operation error, resulting in an

unexpected accident.

●

Always pay attention to the vehicle’s

surroundings.

The size of the vehicles and other

objects may look different when in dig-

ital mirror mode and optical mirror

mode.

When backing up, make sure to

directly check the safety of the area

around your vehicle, especially behind

the vehicle.

Additionally, if a vehicle approaches

from the rear in the dark, such as at

night, the surrounding area may

appear dim.

■

To prevent causes of fire

If the driver continues using the Digital

Rear-view Mirror while smoke or odor

comes from the mirror, it may result in

fire. Stop using the system immediately

and contact your Lexus dealer.

147

3-4. Adjusting the steering wheel and mirrors

fore
dri
ving

■

Cleaning the mirror surface

If the mirror surface is dirty, the image
on the display may be difficult to see.
Clean the mirror surface gently using a
soft dry cloth.

■

The camera

The camera for the Digital Rear-view Mir-

ror is located as shown.

If you notice any of the following symptoms, refer to the following table for the likely
cause and the solution.
If the symptom is not resolved by the solution, have the vehicle inspected by your
Lexus dealer.

Cleaning the Digital Rear-view
Mirror

NOTICE

■

To prevent the camera from malfunc-

tioning

●

Observe the following precautions,

otherwise the Digital Rear-view Mirror

may not operate properly.

• Do not strike or hit the camera or sub-

ject it to a strong impact, as the camera

installation position and angle may be

changed.

• Do not remove, disassemble or modify

the camera.

• Do not allow an organic solvent, car

wax, window cleaner or glass coating

to adhere to the camera. If this hap-

pens, wipe it off as soon as possible.

• When applying colored film (including

transparent film) to the rear window

glass, do not apply it to the area in front

of the camera.

If film is applied to the area in front of

the camera, the image from the cam-

era may not display properly.

●

Do not subject the camera to a strong

impact as this could cause a malfunc-

tion.

If this happens, have the vehicle

inspected by your Lexus dealer as

soon as possible.

If you notice any symptoms

148

3-4. Adjusting the steering wheel and mirrors

Symptom

Likely cause

Solution

The image is difficult to see.

The mirror surface is dirty.

Clean the mirror surface gen-
tly, using a soft dry cloth.

Sunlight or headlights are
shining directly into the Digi-
tal Rear-view Mirror.

Change to optical mirror
mode. (If the light is coming
through the moon roof, close
the sunshade.)

• The vehicle is in a dark

area.

• The vehicle is near a TV

tower, broadcasting sta-
tion, electric power plant,
or other location where
strong radio waves or elec-
trical noise may be present.

• The temperature around

the camera is extremely
high/low.

• The ambient temperature is

extremely low.

• It is raining or humid.
• Sunlight or headlights are

shining directly into the
camera lens.

• The vehicle is under fluo-

rescent lights, sodium
lights, mercury lights, etc.

• Exhaust gas is obstructing

the camera.

Change to optical mirror
mode.
(Change back to digital mir-
ror mode when the conditions
have improved.)

Foreign matters such as water
droplets or dust is on the
camera lens.

Have the vehicle inspected by
your Lexus dealer.

149

3-4. Adjusting the steering wheel and mirrors

fore
dri
ving

The image is difficult to see.

The luggage in the luggage
compartment is reflected off
the rear window glass and
obstructing the camera.

• Change to optical mirror

mode.

• Move the luggage to a

position where it does not
obstruct the camera or
cover it with a black cloth to
reduce the amount it is
reflected off the rear win-
dow glass.

The rear window glass is
fogged up.

Change to optical mirror
mode.
After defogging the rear win-
dow using the rear window
defogger (



P.388), use the

digital mirror mode again.

The outside of the rear win-
dow glass is dirty.

Use the rear window wiper to
remove dirt.

The inside of the rear window
glass is dirty.

Have the vehicle inspected by
your Lexus dealer.

The image is out of align-
ment.

The back door is not fully
closed.

Fully close the back door.

The camera or its surround-
ing area has received a strong
impact.

Change to optical mirror
mode and have the vehicle
inspected by your Lexus
dealer.

The display is dim and

is displayed.

The system may be malfunc-
tioning.

Change to optical mirror
mode and have the vehicle
inspected by your Lexus
dealer.

goes off.

Symptom

Likely cause

Solution

150

3-4. Adjusting the steering wheel and mirrors

is displayed.

The Digital Rear-view Mirror
is extremely hot.
(The display will gradually
become more dim. If the tem-
perature continues to
increase, the Digital Rear-
view Mirror will turn off.)

Reducing the cabin tempera-
ture is recommended to
reduce the temperature of
the mirror.
(

will disappear when the

mirror becomes cool.)

does not disappear

even though the mirror is
cool, have the vehicle
inspected by your Lexus
dealer.

The lever cannot be oper-
ated properly.

The lever may be malfunc-
tioning.

Change to optical mirror
mode and have the vehicle
inspected by your Lexus
dealer.
(To change to optical mirror
mode, press and hold the
menu button for approxi-
mately 10 seconds.)

Symptom

Likely cause

Solution

151

3-4. Adjusting the steering wheel and mirrors

fore
dri
ving

■

Defogging the mirrors

The outside rear view mirrors can be

cleared using the mirror defoggers. Turn on

the rear window defogger to turn on the

outside rear view mirror defoggers.

(



P.388)

■

Auto anti-glare function

When the anti-glare inside rear view mirror

is set to auto mode, the outside rear view

mirrors will activate in conjunction with the

anti-glare inside rear view mirror to reduce

reflected light. (



P.142, 145)

■

When using the outside rear view mir-

rors in a cold weather

When it is cold and the outside rear view

mirrors are frozen, it may not be possible to

fold/extend them or adjust the mirror sur-

face. Remove the ice, snow, etc. covering

the outside rear view mirrors.

To select a mirror to adjust, press
the switch.

The indicator comes on.

Left

Right

Pressing the same switch again will put the
switch in neutral.

To adjust the mirror, operate the
switch.

Right

Down

Outside rear view mirrors

The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.

WARNING

■

Important points while driving

Observe the following precautions while

driving.

Failing to do so may result in loss of con-

trol of the vehicle and cause an accident,

resulting in death or serious injury.

●

Do not adjust the mirrors while driving.

●

Do not drive with the mirrors folded.

●

Both the driver and passenger side

mirrors must be extended and prop-

erly adjusted before driving.

■

When the mirror defoggers are oper-

ating

Do not touch the rear view mirror sur-

faces, as they can become very hot and

burn you.

NOTICE

■

If ice should jam the mirror

Do not operate the control or scrape the

mirror face. Use a spray de-icer to free

the mirror.

Adjustment procedure

152

3-4. Adjusting the steering wheel and mirrors

Left

■

Mirror angle can be adjusted when

The engine switch is in ACC or ON.

■

Automatic adjustment of the mirror

angle

A desired mirror face angle can be entered

to memory and recalled automatically by

the driving position memory. (



P.160)

■

Using the switch

Press the switch to fold the mirrors.

Press it again to extend them to the original
position.

■

Setting automatic mode

Automatic mode allows the folding or
extending of the mirrors to be linked to
locking/unlocking of the doors.
Press the “AUTO” switch to set auto-
matic mode.

The indicator

will come on.

Pressing the switch once more will return
to manual mode.

■

Customization

The automatic mirror folding and extending

operation can be changed. (Customizable

features:



P.558)

When either “L” or “R” of the mirror
select switch is selected, the outside
rear view mirrors will automatically
angle downwards when the vehicle is
reversing in order to give a better view
of the ground.
To disable this function, select neither
“L” nor “R”.

■

Adjusting the mirror angle when
the vehicle is reversing

With the shift lever in R, adjust the mir-
ror angle at a desired position. The
adjusted angle will be memorized and
the mirror will automatically tilt to the
memorized angle whenever the shift
lever is shifted to R from next time.

The memorized downward tilt position of

Folding and extending the mir-
rors

WARNING

■

When a mirror is moving

To avoid personal injury and mirror mal-

function, be careful not to get your hand

caught by the moving mirror.

Linked mirror function when
reversing

Lexus LX600 (2023 year). Manual in english - page 4