Ford E-150 (2011 year). Manual - part 78
Multi-point inspection
In order to keep your vehicle running right, it is important to have the
systems on your vehicle checked regularly. This can help identify
potential issues and prevent major problems. Ford Motor Company
recommends the following multi-point inspection be performed at every
scheduled maintenance interval to help ensure your vehicle keeps
running great.
Be sure to ask your Ford or Lincoln Mercury dealership service advisor
or technician about the multi-point vehicle inspection. It’s a
comprehensive way to perform a thorough inspection of your vehicle. It’s
your checklist that gives you immediate feedback on the overall
condition of your vehicle. You’ll know what’s been checked, what’s okay,
Check every six months
❑
Check lap/shoulder belts and seat latches for wear and function
❑
Check parking brake for proper operation
❑
Check safety warning lamps (brake, ABS, airbag, safety belt) for operation
❑
Check cooling system fluid level and coolant strength
❑
Check battery connections and clean if necessary
❑
Check washer spray, wiper operation and clean all wiper blades (replace as necessary)
❑
Check and lubricate all hinges, latches and outside locks. Inspect for correct operation
❑
Check and lubricate door rubber weatherstrips. Inspect for excessive wear
❑
Check and clean body and door drain holes. Inspect for clogs and obstructions
Multi-point inspection - Recommended at every visit
❑
Check and top-up fluid levels: brake, coolant recovery reservoir, manual and automatic transmission (if equipped with an
underhood dipstick), power steering (if equipped) and window washer
❑
Inspect tires for wear and check air pressure, including spare.
❑
Check exhaust system for leaks, damage, loose parts and foreign material.
❑
Check battery performance.
❑
Check operation of horn, exterior lamps, turn signals and hazard warning lights.
❑
Check radiator, coolers, heater and air conditioning hoses.
❑
Inspect windshield washer spray and wiper operation.
❑
Check windshield for cracks, chips and pitting.
❑
Inspect for oil and fluid leaks.
❑
Inspect engine air filter.
❑
Inspect half shaft dust boots, if equipped.
❑
Check shocks and struts and other suspension components for leaks and damage.
❑
Inspect steering and linkage.
❑
Inspect accessory drive belt(s).
❑
Inspect clutch operation, if equipped.
Scheduled Maintenance Guide
314