|
|
TEST ACTION APPLICABILITY 3 With the DRBIII t in Transmission Sensors, read the TPS voltage. Is the TPS voltage below 0.5 volts? All Yes → Go To 4 No → Go To 6 4 Ignition on, engine not running. t in Transmission Sensors, record the TPS voltage. While back probing the TCM harness connector, measure the voltage of the TPS t and the reading from the digital multi meter. All Yes → Repair the TPS signal circuit between the TCM harness connector and the splice for high resistance. No → Go To 5 5 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Transmission Control Module per the Service infor- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 6 The conditions necessary to set this DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 41TE TRANSMISSION VERIFICATION TEST - VER 1. No → Test Complete. 19 TRANSMISSION - EATX P0122-TPS/APPS LOW — Continued |