|
|
|
3. Install the J 38834-2 onto the J 38834-1 so that the smaller diameter of the J 38834-2 will be facing the front of the engine block. 4. Install the J 38834-2 on the inside of the balance shaft front bearing bore. 5. Lubricate the NEW balance shaft rear bearing with clean engine oil. 6. Install the balance shaft rear bearing onto the J 38834-2. 7. Align the balance shaft rear bearing for installation. 8. Using a wrench secure the J 38834-1 into place. 9. Rotate the J 38834 nut until the balance shaft rear bearing is properly and completely pushed into the balance shaft rear bearing bore. See Special Tools. 2. Remove the J 38834 . See Special Tools. CAMSHAFT TIMING CHAIN AND SPROCKET CLEANING AND INSPECTION
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
|