|
|
|
Content .. 1513 1514 1515 1516 ..
13. Clean the bleeder valve, the caliper bores, the caliper passages and the pistons with denatured alcohol. Dry the parts and blow out the brake fluid passages using filtered, non- 14. Replace the pistons or the caliper if any of the following conditions exist: Scoring in the caliper bores Corrosion in the caliper bores Pitting in the caliper bores Damage to the pistons (phenolic) 15. Clean the brake caliper assembly with denatured alcohol. 16. Dry with filtered, non-lubricated compressed air. Assembly Procedure 1. Apply a small amount of clean DOT-3 brake fluid to the piston, piston seal, and piston bore. IMPORTANT: When applying the clean brake fluid to the piston bores, piston seals and pistons, only apply the brake fluid to one
2008 Chevrolet Silverado 1500 2008 BRAKES Disc Brakes - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|