Lincoln Navigator (2019 year). Instruction - part 9

 

  Index      Lincoln     Lincoln Navigator (2019 year) - instruction in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     7      8      9      10     ..

 

 

Lincoln Navigator (2019 year). Instruction - part 9

 

 

Action

Message

Displayed during spare key programming when not enough keys have been programmed.

Not Enough Keys Learned

Displays when the key battery is low. Change the battery as soon as possible.

Key Battery Low Replace Soon

Displays when the vehicle is switched off.

Vehicle Switched Off

Lane Keeping System

Action

Message

The system has malfunctioned. Contact an authorized dealer as soon as possible.

Lane Keeping Sys. Malfunction Service

Required

The system has detected a condition that has caused the system to be temporarily unavailable.

Front Camera Temporarily Not Available

The system has detected a condition that requires the windshield to be cleaned to operate

properly.

Front Camera Low Visibility Clean Screen

The system has malfunctioned. Contact an authorized dealer as soon as possible.

Front Camera Malfunction Service

Required

The system requests the driver to keep their hands on the steering wheel.

Keep Hands on Steering Wheel

135

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Maintenance

Action

Message

Stop your vehicle as soon as safely possible, turn off the engine. Check the oil level. If the warning

stays on or continues to come on with your engine running, contact an authorized dealer as

soon as possible.

Low Engine Oil Pressure

The engine oil life remaining is 10% or less.  See General Maintenance Information (page 547).

Change Engine Oil Soon

The oil life left reaches 0%. See General Maintenance Information (page 547).

Oil Change Required

The brake fluid level is low and the brake system should be inspected immediately.  See Brake

Fluid Check (page 370).

Brake Fluid Level Low

The brake system needs servicing. Stop the vehicle in a safe place. Contact an authorized dealer.

Check Brake System

The engine coolant temperature is excessively high.

Engine Coolant Over Temperature

The washer fluid is low and needs to be refilled.

Washer Fluid Level Low

Indicates that your vehicle is still in Transport mode. This may not allow some features to operate

properly. Contact an authorized dealer.

Transport Mode Contact Dealer

Indicates that your vehicle is still in Factory mode. This may not allow some features to operate

properly. Contact an authorized dealer.

Factory Mode Contact Dealer

Informs the driver that the powertrain needs service due to a powertrain malfunction.

See Instruction

The engine has reduced power to help reduce high engine temperature.

Power Reduced to Lower Engine Temp

The brake system has reduced stopping power.

Brake Applied Power Reduced

136

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MyKey

Action

Message

MyKey cannot be programmed during key programming.

MyKey not Created

When starting your vehicle, a MyKey is in use and the MyKey speed limit is on.

Speed Limited to XX MPH/km/h

When a MyKey is in use, the MyKey speed limit is on and your vehicle speed is approaching

80 mph (130 km/h).

Near Vehicle Top Speed

Displays when MyKey is active.

MyKey Active Drive Safely

Displays when MyKey is active.

Check Speed Drive Safely

Displays when a MyKey is in use and the MyKey speed limit is reached.

Vehicle at Top Speed of MyKey Setting

Displays when a MyKey is in use and Belt-Minder is activated.

Buckle Up to Unmute Audio

Displays when a MyKey is in use and AdvanceTrac is activated.

AdvanceTrac On - MyKey Setting

Displays when a MyKey is in use and park aid is activated.

MyKey Park Aid Cannot be Deactivated

Displayed when the lane keeping aid is on per MyKey settings.

Lane Keeping Alert On MyKey Setting

137

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Off Road

Action

Message

Hill descent control mode is active.

Hill Descent Control Active

Hill descent control mode is inactive.

Hill Descent Control OFF

Your vehicle speed requirement for off-road mode entry has not been met.

For Hill Descent Reduce Speed XX MPH/km/h or Less

You need to select a transmission gear for hill descent mode.

For Hill Descent Select Gear

Hill descent control mode is deactivated and you must resume control.

Hill Descent Driver Resume Control

A hill descent system fault is present.

Hill Descent Control Fault

The hill descent system is cooling due to overuse.

Hill Descent Control Off System Cooling

The hill descent control system is ready.

Hill Descent Control Ready

Park Aid

Action

Message

The system has detected a condition that requires service. Contact your authorized dealer.  See

Side Sensing System (page 239).

Check Front Park Aid

The system has detected a condition that requires service. Contact your authorized dealer.  See

Rear Parking Aid (page 237).

Check Rear Park Aid

138

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Park Brake

Action

Message

The parking brake is set, the engine is running and you drive your vehicle more than 3 mph

(5 km/h). If the warning stays on after the parking brake is released, contact an authorized dealer

as soon as possible.

Park Brake Engaged

The electric parking brake is set and a instruction release is attempted without the brake pedal

being pressed.

To Release: Press Brake and Switch

The electric parking brake is set and an automatic release is attempted but cannot be performed.

Perform a instruction release.

Park Brake Use Switch to Release

The electric parking brake is set and your vehicle speed exceeds 3 mph (5 km/h). Release park

brake before continued driving.

Release Park Brake

The electric parking brake is not fully applied.

Park Brake Not Applied

The electric parking brake is not fully released.

Park Brake Not Released

The electric parking brake system has been put into a special mode that is used to allow service

of the rear brakes. Contact an authorized dealer.

Park Brake Maintenance Mode

139

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Action

Message

The electric park brake system has detected a condition that requires service. Some functionality

may still be available. Contact your authorized dealer.

Park Brake Limited Function Service

Required

The electric parking brake system has detected a condition that requires service. Contact your

authorized dealer.

Park Brake Malfunction Service Now

Numerous park brake applies have overheated the system. Wait 2 minutes before attempting

to apply again.

Park Brake System Overheated

Power Steering

Action

Message

The power steering system has detected a condition that requires service. See an authorized

dealer.

Steering Fault Service Now

The power steering system has detected a condition within the power steering system or passive

entry or passive start system requires service. Contact an authorized dealer.

Steering Assist Fault Service Required

The power steering system is not working. Stop the vehicle in a safe place. Contact your

authorized dealer.

Steering Loss Stop Safely

140

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Pre-Collision Assist

Action

Message

You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor.
You can typically clean the sensor to resolve.

Pre-Collision Assist Not Available Sensor

Blocked

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Pre-Collision Assist Not Available

Pro Trailer Backup Assist™

Action

Message

Pro Trailer Backup Assist™ can only be activated when the vehicle is stopped.

Pro Trailer Backup Assist™ Not Active Stop Vehicle to

Activate

Camera System is locating the sticker. Wait until the sticker is found before

attempting to use Pro Trailer Backup Assist.

Pro Trailer Backup Assist™ Locating Sticker Please wait...

Press Knob to Exit

Stop Now. Pro Trailer Backup Assist™ has reached max trailer angle.

Pro Trailer Backup Assist™ Stop now Maximum trailer angle

Press Knob to Exit

Stop Now. Pro Trailer Backup Assist™ is no longer controlling steering.

Pro Trailer Backup Assist™ Stop Now Take Control of

Steering Wheel

Slow vehicle speed. Vehicle is approaching the exit speed for the Pro Trailer

Backup Assist™ feature.

Pro Trailer Backup Assist™ Reduce Speed Turn Knob to

Steer Press Knob to Exit

141

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Action

Message

Conditions for Pro Trailer Backup Assist operation are not met.  See Trailer

Reversing Aids (page 298).

Pro Trailer Backup Assist™ System is Not Available

Pro Trailer Backup Assist™ cannot operate with hands on wheel. Remove hands

to activate.

Pro Trailer Backup Assist™ Remove Hands from Steering

Wheel to Activate Press Knob to Exit

Pro Trailer Backup Assist™ knob has been pushed to deactivate the system.

Pro Trailer Backup Assist™ Cancelled by Driver Take Control

of Steering Wheel

Pro Trailer Backup Assist™ operation is only available in reverse gear. Shift gear

selector into reverse to activate.

Pro Trailer Backup Assist™ Shift to Reverse to Activate.

Press Knob to Exit

Camera system cannot locate sticker. Shift to park.

Pro Trailer Backup Assist™ Sticker Not Found Shift to Park

Press Knob to Exit

Camera system cannot locate sticker.  See Trailer Reversing Aids (page 298).

Pro Trailer Backup Assist™ Sticker Not Found Refer to

Owner's Instruction. Press Knob to Exit

Drive between 4–24 mph (6–39 km/h) straight forward to calibrate Pro Trailer

Backup Assist™.

Pro Trailer Backup Assist™ Drive Straight Forward to

Calibrate. Press Knob to Exit

The system has completed calibration. Stop the vehicle to use Pro Trailer Backup

Assist™ feature.

Pro Trailer Backup Assist™ Calibration Complete Stop

Vehicle

142

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Remote Start

Action

Message

Displays as a reminder to apply the brake and push the gear shift button to drive the vehicle

after a remote start.

To Drive: Press Brake and Gear Shift

Button

Seats

Action

Message

Displays as a reminder that memory seats are not available while driving.

Memory Recall Not Permitted While Driving

Displays to show where your memory setting has been saved.

Memory {0} Saved

Stability Control

Action

Message

Displayed when the system has detected a condition that requires service. Contact your

authorized dealer as soon as possible.

Service AdvanceTrac

The traction control has been disabled or enabled by the driver.

AdvanceTrac Off On

143

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Starting System

Action

Message

Displays when starting the vehicle as a reminder to apply the brake.

To START Press Brake

Displays when the starter has exceeded its cranking time in attempting to start the vehicle.

Cranking Time Exceeded

Displays when the starter is attempting to start the vehicle.

Engine Start Pending Please Wait

Displays when the pending start has been cancelled.

Pending Start Cancelled

Tire Pressure Monitoring System

Action

Message

One or more tires on your vehicle have low tire pressure.  See Tire Pressure Monitoring System

(page 405).

Tire Pressure Low

The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to

come on, contact an authorized dealer. See Tire Pressure Monitoring System (page 405).

Tire Pressure Monitor Fault

A tire pressure sensor is malfunctioning, or your spare tire is in use. For more information on

how the system operates under these conditions,  See Tire Pressure Monitoring System (page
405). 
 If the warning stays on or continues to come on, contact an authorized dealer as soon as

possible.

Tire Pressure Sensor Fault

144

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Trailer

Action

Message

The current gain setting for the trailer brake.

Trailer Brake Gain: {trailer gain value:#0.0}

The current gain setting for the trailer brake when a trailer is not connected.

Trailer Brake Gain: {trailer gain value:#0.0} No Trailer

Faults sensed in the Integrated Trailer Brake Control Module followed by a single

chime.  See Towing a Trailer (page 297).

Trailer Brake Module Fault

A correct trailer connection is sensed during a given ignition cycle.

Trailer Connected

A trailer connection becomes disconnected, either intentionally or unintentionally,

and has been sensed during a given ignition cycle.

Trailer Disconnected

The trailer sway control has detected trailer sway.

Trailer Sway Reduce Speed

There are certain faults in your vehicle wiring and trailer wiring/brake system.

See Towing a Trailer (page 297).

Trailer Wiring Fault

There is a fault with your trailer turn lamp. Check your lamp.

Trailer Left Turn Lamps Fault Check Lamps

There is a fault with your trailer turn lamp. Check your lamp.

Trailer Right Turn Lamps Fault Check Lamps

There is a fault with your trailer battery.  See Towing a Trailer (page 297).

Trailer Battery Not Charging See Instruction

There is a fault with your vehicle trailer lighting module.  See Towing a Trailer

(page 297).

Trailer Lighting Module Fault See Instruction

One or more tires on your trailer is below the specified tire pressure.

Trailer Tire Low Specified:

145

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Action

Message

A trailer tire pressure sensor is malfunctioning. If the warning stays on or continues

to come on, contact an authorized dealer as soon as possible.

Trailer Tire Pressure Sensor Fault

The trailer tire pressure monitoring system is malfunctioning. If the warning stays

on or continues to come on, contact an authorized dealer.

Trailer Tire Pressure Monitor Fault

The system cannot detect the trailer tire pressure monitoring system.

Trailer Tire Pressure Monitor Capability Not Detected

The trailer tire pressure monitoring system is not setup.  See General Information

(page 120).

Trailer Tire Pressure Indication Not Setup See Instruction

Transmission

Action

Message

You switched the engine off and shift select lever is in any position other than park (P).

Shift to Park

Transmission is too cold. Wait for it to warm up before you drive.

Transmission Warming Up Please Wait

Displays when the brake pedal needs to be depressed.

Press Brake Pedal

The transmission is overheating and needs to cool. Stop in a safe place as soon as it’s possible.

Transmission Over Temperature Stop

Safely

See an authorized dealer.

Transmission Service Required

The transmission is overheating and needs to cool. Stop in a safe place as soon as it’s possible.

Transmission Too Hot Press Brake

146

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Action

Message

The transmission has limited functionality. See an authorized dealer.

Transmission Limited Function See Instruction

A reminder to shift into park. In addition, this message is typical after reconnecting or recharging

the battery until you cycle the ignition to the on mode.  See Changing the 12V Battery (page

371).

Transmission Not in Park

Displays when there is a system fault and the park brake needs to be depressed before exiting

the vehicle. See your authorized dealer.

SHIFT SYS FAULT Confirm Park Brake

Apply Before Exiting the Vehicle

See your authorized dealer.

SHIFT SYS FAULT Service Required

Displays when there is a system fault while the vehicle is shifting to park. See your authorized

dealer.

SHIFT SYS FAULT Vehicle is Shifting to

Park

Displays when there is a system fault while the vehicle is shifting to reverse. See your authorized

dealer.

SHIFT SYS FAULT Reverse Unavailable

Service Required

See an authorized dealer.

SHIFT SYS FAULT Drive Unavailable Select

S for Drive Service Required

See your authorized dealer.

SHIFT SYS FAULT Neutral Unavailable

Service Required

Displays when an invalid gear has been selected.

Invalid Gear Selection

147

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Action

Message

Displays when the brake pedal needs to be depressed to enable the transmission to shift from

park.

Depress Brake to Shift from Park

Displays when Stay in Neutral Mode is active. See Automatic Transmission (page 210).

Stay in Neutral Mode Engaged

Displays when the neutral button N needs to be pressed again to enter Stay in Neutral Mode.

See Automatic Transmission (page 210).

To Stay in Neutral When Exiting Vehicle

Select N Again

HEAD UP DISPLAY

 (IF EQUIPPED)

Head Up Display (HUD)

This is a visual system that shows information
in your field of view as you drive. The
information comes from various vehicle
systems and includes vehicle speed, speed
limit, navigation, and advanced driver
assistance systems (ADAS), such as adaptive
cruise control (ACC) and the lane keeping
system. This system projects the information
off the windshield, and focuses the image

near the end of the hood approximately 7 ft
(2 m) in front of the driver. Viewing this
information does not require you to
significantly move your head, allowing you
to keep your eyes on the road while having
quick and easy access to information.

Head Up Display Information

E228521

Signaling and Traffic Indication.

A

Left Information Group.

B

ADAS Display Area.

C

148

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Navigation Display Area.

D

Status Bar.

E

Speedometer Display Area.

F

Signaling and Traffic Indication

Displays direction indicators, blind spot
information (if direction indicators are active)
and cross traffic alert.

Left Information Group

Displays incoming call information.

ADAS Display Area

Displays ACC and lane keeping system
status and warnings.

Navigation Display Area

Displays navigation next turn instructions.

Status Bar

Displays distance to empty (DTE), time and
outside air temperature. Next to DTE, the
fuel gauge fill color changes to yellow in low
fuel conditions. You can switch off the status
bar in the HUD settings menu.

Speedometer Display Area

Displays current vehicle speed, speed limit
(if available in the map database) and your
transmission gear selection.

Configuring The Head Up Display

You can control the system's options through
the information display by using the HUD,
OK and arrow buttons on the right-hand side
of your steering wheel.  See General
Information
 (page 120). 
 You can adjust the
display according to your height to make
viewing the content easier. You can also
adjust what content displays and the
brightness of the content. The system's
options appear in the instrument cluster
while the updates happen in the HUD.

Note: If HUD On is unchecked, other options
of the system are hidden.

Note: The HUD menu automatically closes
after a certain period of inactivity.

Note: The HUD image brightness
automatically adjusts to the brightness of
the ambient environment. You have the
ability to adjust the brightness further
according to your preference.

Note: In some instances, sunlight can cause
some reflections in and around the HUD
image.

149

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Head-Up Display (HUD)

Turns the HUD on and off.

HUD On

Follow onscreen directions to confirm or modify your settings.

Brightness

Follow onscreen directions to confirm or
modify your settings.

Vertical Position

HUD Adjustments

Image Rotation

Turns the distance to empty, time and temperature on and off.

HUD Content

Select Your Setting

Cruise and Lane Control

Note: When you save a memory preset position, your current HUD settings are also saved to that memory preset position.  See Memory
Function
 (page 167).

150

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201808, First-Printing

Information Displays

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     7      8      9      10     ..