Dodge Magnum SRT (2008 year). Instruction

• The system will prompt you to say the name of the

person you want to call.

• After the ⬙Ready⬙ prompt and the following beep, say

the name of the person you want to call. For example,
you can say

⬙John Doe,⬙ where John Doe is a previ-

ously stored name entry in the UConnect

威 phonebook.

To learn how to store a name in the phonebook, refer
to

⬙Add Names to Your UConnect威 Phonebook,⬙ in

this section.

• The UConnect威 system will confirm the name and

then dial the corresponding phone number, which
may appear in the display of certain radios.

Add Names to Your UConnect

威 Phonebook

NOTE:

Adding names to the phonebook is recom-

mended when the vehicle is not in motion.

• Press the PHONE button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook New Entry.⬙

• When prompted, say the name of the new entry. Use of

long names helps the voice recognition and it is
recommended. For example, say

⬙Robert Smith⬙ or

⬙Robert⬙ instead of ⬙Bob.⬙

• When prompted, enter the number designation (e.g.,

⬙Home,⬙ ⬙Work,⬙ ⬙Mobile,⬙ or ⬙Pager⬙). This will allow
you to store multiple numbers for each phonebook
entry, if desired.

• When prompted, recite the phone number for the

phonebook entry that you are adding.

After you are finished adding an entry into the phone-
book, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The UConnect

威 system will allow you to enter up to 32

names in the phonebook with each name having up to
four associated phone numbers and designations. Each
language has a separate 32-name phonebook accessible
only in that language.

Phonebook Download
UConnect

威 allows the user to download entries from

their phone via Bluetooth

威. To use this feature, press the

PHONE button and say “Phonebook Download.” The
system prompts, “Ready to accept “V” card entry via
Bluetooth

威…” The system is now ready to accept phone-

book entries from your phone using the Bluetooth

威

Object Exchange Profile (OBEX). Please see your phone
Owner’s Instruction for specific instructions on how to send
these entries from your phone.

NOTE:

• The phone handset must support Bluetooth威 OBEX

transfers of phonebook entries to use this feature.

• Some phones cannot send phonebook entries if they

are already connected to any system via Bluetooth

威,

and you may see a message on the phone display that
the Bluetooth

威 link is busy. In this case, the user must

first disconnect or drop the Bluetooth

威 connection to

the UConnect

威 system, and then send the address

book entry via Bluetooth

威. Please see your phone

owner’s instruction for specific instructions on how to
drop the Bluetooth

威 connection.

• If the phonebook entry is longer than 24 characters, it

will only use the first 24 characters.

Edit Entries in the UConnect

威 Phonebook

NOTE:

Editing names in the phonebook is recom-

mended when the vehicle is not in motion.

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Edit.⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• You will then be asked for the name of the phonebook

entry that you wish to edit.

• Next, choose the number designation (home, work,

mobile, or pager) that you wish to edit.

• When prompted, recite the new phone number for the

phonebook entry that you are editing.

After you are finished editing an entry in the phonebook,
you will be given the opportunity to edit another entry in
the phonebook, call the number you just edited, or return
to the main menu.

⬙Phonebook Edit⬙ can be used to add another phone
number to a name entry that already exists in the
phonebook. For example, the entry John Doe may have a
mobile and a home number, but you can add ”John
Doe’s” work number later using the

⬙Phonebook Edit⬙

feature.

Delete Entries in the UConnect

威 Phonebook

NOTE:

Editing phonebook entries is recommended

when the vehicle is not in motion.

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Delete.⬙

• After you enter the Phonebook Delete menu, you will

then be asked for the name of the entry that you wish
to delete. You can either say the name of a phonebook
entry that you wish to delete or you can say

⬙List

Names

⬙ to hear a list of the entries in the phonebook

from which you choose. To select one of the entries
from the list, press the “Voice Recognition” button
while the UConnect

威 system is playing the desired

entry and say

⬙Delete.⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• After you enter the name, the UConnect威 system will

ask you which designation you wish to delete: home,
work, mobile, pager, or all. Say the designation you
wish to delete.

• Note that only the phonebook entry in the current

language is deleted.

Delete All Entries in the UConnect

威 Phonebook

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Erase All.⬙

• The UConnect威 system will ask you to verify that you

wish to delete all the entries from the phonebook.

• After confirmation, the phonebook entries will be

deleted.

• Note that only the phonebook in the current language

is deleted.

List All Names in the UConnect

威 Phonebook

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook List Names.⬙

• The UConnect威 system will play the names of all the

phonebook entries.

• To call one of the names in the list, press the “Voice

Recognition” button during the playing of the desired
name, and say

⬙Call.⬙

NOTE:

The user can also exercise

⬙Edit⬙ or ⬙Delete⬙

operations at this point.

• The UConnect威 system will then prompt you as to the

number designation you wish to call.

• The selected number will be dialed.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Phone Call Features
The following features can be accessed through the
UConnect

威 system if the feature(s) are available on your

cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the UConnect

威 system. Check with

your cellular service provider for the features that you
have.

Answer or Reject an Incoming Call - No Call
Currently in Progress
When you receive a call on your cellular phone, the
UConnect

威 system will interrupt the vehicle audio sys-

tem, if on, and will ask if you would like to answer the
call. Press the PHONE button to accept the call. To reject
the call, press and hold the PHONE button until you hear
a single beep, indicating that the incoming call was
rejected.

Answer or Reject an Incoming Call - Call
Currently in Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your cell
phone. Press the PHONE button to place the current call
on hold and answer the incoming call.

NOTE:

The UConnect

威 system compatible phones in

the market today do not support rejecting an incoming
call when another call is in progress. Therefore, the user
can only answer an incoming call or ignore it.

Making a Second Call While Current Call in
Progress
To make a second call while you are currently on a call,
press the “Voice Recognition” button and say

⬙Dial⬙ or

⬙Call⬙ followed by the phone number or phonebook entry
you wish to call. The first call will be on hold while the
second call is in progress. To go back to the first call, refer

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

⬙Toggling Between Calls⬙ in this section. To combine

two calls, refer to

⬙Conference Call⬙ in this section.

Place/Retrieve a Call From Hold
To put a call on hold, press the PHONE button until you
hear a single beep. This indicates that the call is on hold.
To bring the call back from hold, press and hold the
PHONE button until you hear a single beep.

Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the PHONE button until you hear a single beep,
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at one
time.

Conference Call
When two calls are in progress (one active and one on
hold), press and hold the PHONE button until you hear
a double beep indicating that the two calls have been
joined into one conference call.

Three-Way Calling
To initiate three-way calling, press the “Voice Recogni-
tion” button while a call is in progress, and make a
second phone call, as described under

⬙Making a Second

Call While Current Call in Progress.

⬙ After the second call

has established, press and hold the PHONE button until
you hear a double beep, indicating that the two calls have
been joined into one conference call.

Call Termination
To end a call in progress, momentarily press the PHONE
button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the PHONE button until you hear a single beep.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Redial

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Redial.⬙

• The UConnect威 system will call the last number that

was dialed from your cellular phone.

NOTE:

This may not be the last number dialed from the

UConnect

威 system.

Call Continuation
Call continuation is the progression of a phone call on the
UConnect

威 system after the vehicle ignition key has been

switched to OFF. Call continuation functionality avail-
able on the vehicle can be any one of three types:

• After the ignition key is switched to OFF, a call can

continue on the UConnect

威 system either until the call

ends, or until the vehicle battery condition dictates
cessation of the call on the UConnect

威 system and

transfer of the call to the mobile phone.

• After the ignition key is switched to OFF, a call can

continue on the UConnect

威 system for a certain dura-

tion, after which the call is automatically transferred
from the UConnect

威 system to the mobile phone.

• An active call is automatically transferred to the

mobile phone after the ignition key is switched to OFF.

UConnect

姞 System Features

Language Selection
To change the language that the UConnect

威 system is

using:

• Press the PHONE button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• After the ⬙Ready⬙ prompt and the following beep, say

the name of the language you wish to switch to
(English, Espanol, or Francais, if so equipped).

• Continue to follow the system prompts to complete

language selection.

After selecting one of the languages, all prompts and
voice commands will be in that language.

NOTE:

After every UConnect

威 language change opera-

tion, only the language-specific 32-name phonebook is
usable. The paired phone name is not language-specific
and usable across all languages.

Emergency Assistance
If you are in an emergency and the mobile phone is
reachable:

• Pick up the phone and instructionly dial the emergency

number for your area.

If the phone is not reachable and the UConnect

威 system

is operational, you may reach the emergency number as
follows:

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Emergency⬙ and the UConnect威 system will instruct
the paired cellular phone to call the emergency num-
ber. This feature is only supported in the U.S.

NOTE:

The emergency number dialed is based on the

country where the vehicle is purchased (911 for the U.S.
and Canada and 060 for Mexico). The number dialed may
not be applicable with the available cellular service and
area.

The UConnect

威 system does slightly lower your chances

of successfully making a phone call as to that for the cell
phone directly.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Your phone must be turned on and paired to the
UConnect

威 system to allow use of this vehicle feature in

emergency situations, when the cell phone has network
coverage and stays paired to the UConnect

威 system.

Towing Assistance
If you need towing assistance:

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Towing Assistance.⬙

NOTE:

The Towing Assistance number dialed is based

on the country where the vehicle is purchased (1-800-528-
2069 for the U.S., 1-877-213-4525 for Canada, 55-14-3454
for Mexico City and 1-800-712-3040 for outside Mexico
City in Mexico).

Please refer to the 24-Hour “Towing Assistance” cover-
age details in the Warranty Information Booklet and on
the 24–Hour Towing Assistance Card.

Paging
To learn how to page, refer to

⬙Working with Automated

Systems.

⬙ Paging works properly except for pagers of

certain companies, which time out a little too soon to
work properly with the UConnect

威 system.

Voice Mail Calling
To learn how to access your voice mail, refer to

⬙Working

with Automated Systems.

⬙

Working with Automated Systems
This method is used in instances where one generally has
to press numbers on the cellular phone keypad while
navigating through an automated telephone system.

You can use your UConnect

威 system to access a voice

mail system or an automated service, such as a paging
service or automated customer service line. Some ser-
vices require immediate response selection. In some
instances, that may be too quick for use of the UConnect

威

system.

100

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

When calling a number with your UConnect

威 system

that normally requires you to enter in a touch-tone
sequence on your cellular phone keypad, you can press
the “Voice Recognition” button and say the sequence you
wish to enter, followed by the word

⬙Send.⬙ For example,

if required to enter your PIN number followed with a
pound, (3 7 4 6 #), you can press the “Voice Recognition”
button and say,

⬙3 7 4 6 # Send.⬙ Saying a number, or

sequence of numbers, followed by

⬙Send,⬙ is also to be

used for navigating through an automated customer
service center menu structure, and to leave a number on
a pager.

You can also send stored UConnect

威 phonebook entries

as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the “Voice Recognition” button and
say, “Send.” The system will prompt you to enter the
name or number and say the name of the phonebook
entry you wish to send. The UConnect

威 system will then

send the corresponding phone number associated with
the phonebook entry, as tones over the phone.

NOTE:

• You may not hear all of the tones due to cellular phone

network configurations; this is normal.

• Some paging and voice mail systems have system time

out settings that are too short and may not allow the
use of this feature.

Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is asking

⬙Would you like to pair a phone, clear

ѧ,⬙ you could press the “Voice Recognition” button and

say,

⬙Pair a Phone⬙ to select that option without having to

listen to the rest of the voice prompt.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

101

Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the UConnect

威 sys-

tem will not repeat a phone number before you dial it).

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Confirmations.⬙ The UConnect威 system will
play the current confirmation prompt status and you
will be given the choice to change it.

Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the UConnect

威 system will provide

notification to inform you of your phone and network
status when you are attempting to make a phone call
using UConnect

威. The status is given for roaming, net-

work signal strength, phone battery strength, etc.

Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnect

威 system (while dial-

ing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth

威 cellular

phone, the audio will be played through your vehicle’s
audio system. The UConnect

威 system will work the same

as if you dial the number using voice recognition.

NOTE:

Certain brands of mobile phones do not send the

dial ring to the UConnect

威 system to play it on the

vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.

102

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Mute/Un-Mute (Mute Off)
When you mute the UConnect

威 system, you will still be

able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the UConnect

威 system:

• Press the “Voice Recognition” button.
• Following the beep, say ⬙Mute.⬙

In order to un-mute the UConnect

威 system:

• Press the “Voice Recognition” button.
• Following the beep, say ⬙Mute off.⬙

Advanced Phone Connectivity

Transfer Call to and from Cellular Phone
The UConnect

威 system allows ongoing calls to be trans-

ferred from your cellular phone to the UConnect

威 system

without terminating the call. To transfer an ongoing call

from your UConnect

威 paired cellular phone to the

UConnect

威 system or vice versa, press the “Voice Recog-

nition” button and say

⬙Transfer Call.⬙

Connect or Disconnect Link Between the
UConnect

威 System and Cellular Phone

Your cellular phone can be paired with many different
electronic devices, but can only be actively

⬙connected⬙

with one electronic device at a time.

If you would like to connect or disconnect the Bluetooth

威

connection between a UConnect

威 paired cellular phone

and the UConnect

威 system, follow the instructions de-

scribed in your cellular phone User’s Instruction.

List Paired Cellular Phone Names

• Press the PHONE button to begin.
• After the “Ready” prompt and the following beep, say

“Setup Phone Pairing.”

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

103

• When prompted, say ⬙List Phones.⬙
• The UConnect威 system will play the phone names of

all paired cellular phones in order from the highest to
the lowest priority. To “select” or “delete” a paired
phone being announced, press the “Voice Recogni-
tion” button and say “Select” or “Delete.” Also, see the
next two sections for an alternate way to “select” or
“delete” a paired phone.

Select Another Cellular Phone
This feature allows you to select and start using another
phone paired with the UConnect

威 system.

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Select Phone⬙ and follow the prompts.

• You can also press the “Voice Recognition” button at

any time while the list is being played, and then
choose the phone that you wish to select.

• The selected phone will be used for the next phone

call. If the selected phone is not available, the
UConnect

威 system will return to using the highest

priority phone present in or near (approximately
within 30 ft (9 m) the vehicle.

Delete UConnect

威 Paired Cellular Phones

• Press the PHONE button to begin.
• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Phone Pairing.⬙

• At the next prompt, say ⬙Delete⬙ and follow the

prompts.

• You can also press the “Voice Recognition” button at

any time while the list is being played, and then
choose the phone you wish to delete.

104

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Things You Should Know About Your UConnect

姞

System

UConnect

威 Tutorial

To hear a brief tutorial of the system features, press the
PHONE button and say “UConnect

威 Tutorial.”

Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the UConnect

威

system Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:

From outside the UConnect

威 mode (e.g., from radio

mode):

• Press and hold the “Voice Recognition” button for five

seconds until the session begins, or,

• Press the “Voice Recognition” button and say the

⬙Setup, Voice Training⬙ command.

Repeat the words and phrases when prompted by the
UConnect

威 system. For best results, the Voice Training

session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched off.

This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.

To restore the voice recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.

Voice Recognition (VR)

• For best performance, adjust the rear view mirror to

provide at least

⁄

in (1 cm) gap between the overhead

console (if equipped) and the mirror.

• Always wait for the beep before speaking.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

105

• Speak normally, without pausing, just as you would

speak to a person sitting a few feet/meters away from
you.

• Make sure that no one other than you is speaking

during a voice recognition period.

• Performance is maximized under:

• low-to-medium blower setting,
• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather condition.

• Even though the system is designed for users speaking

in North American English, French, and Spanish ac-
cents, the system may not always work for some.

• When navigating through an automated system such

as voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say

⬙Send.⬙

• Storing names in the phonebook when the vehicle is

not in motion is recommended.

• It is not recommended to store similar sounding

names in the UConnect

威 phonebook.

• The UConnect威 phonebook nametag recognition rate

is optimized for the person who stored the name in the
phonebook.

• You can say ⬙O⬙ (letter ⬙O⬙) for ⬙0⬙ (zero). ⬙800⬙ must be

spoken

⬙eight-zero-zero.⬙

• Even though international dialing for most number

combinations is supported, some shortcut dialing
number combinations may not be supported.

106

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• In a convertible vehicle, system performance may be

compromised with the convertible top down.

Far End Audio Performance

• Audio quality is maximized under:

• low-to-medium blower setting,
• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather conditions, and
• operation from the drivers seat.

• Performance, such as audio clarity, echo, and loudness

to a large degree rely on the phone and network, and
not the UConnect

威 system.

• Echo at the far end can sometimes be reduced by

lowering the in-vehicle audio volume.

• In a convertible vehicle, system performance may be

compromised with the convertible top down.

Bluetooth

威 Communication Link

Cellular phones have been found to lose connection to
the UConnect

威 system. When this happens, the connec-

tion can generally be re-established by switching the
phone off/on. Your cell phone is recommended to remain
in Bluetooth

威 ON mode.

Power-Up
After switching the ignition key from OFF to either ON
or ACC position, or after a language change, you must
wait at least five seconds prior to using the system.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

107

Dodge Magnum SRT (2008 year). Instruction - part 6