Content .. 78 79 80 81 ..

AUTOMOTIVE INDUSTRY RETAIL, SERVICE & REPAIR - part 80

AURT5737A Analyse and evaluate light marine engine and powerhead system faults

Automotive Industry RS&R

588

AUR99 Version 4.00 Review by 30 June 2004

©Australian National Training Authority

RANGE STATEMENT

Unit context

•

OH&S requirements include vehicle industry regulations,
safety management systems, hazardous substances and
dangerous goods code and safe operating procedures

•

Work is carried out in accordance with legislative
obligations, Australian Design Rules, environmental
legislation, relevant health regulations, manual handling
procedures and organisation insurance requirements

•

Work requires individuals to demonstrate research,
analytical, judgement and problem solving skills in the
diagnosis of faults

Evaluative criteria

•

Evaluative criteria, sometimes referred to as success
factors, detail the criteria against which the achievement
of the objectives of the analysis are judged. They are to
include statistically based criteria and may include other
measures

Isolation procedures

•

Equipment isolation procedures are to industry and
enterprise standards

Testing equipment

•

Testing equipment is to include bore gauges, compression
gauges, computer-based diagnostic system (direct and
internet), cooling system analyser, dial gauges,
micrometers, multi-meter, oscilloscope, pressure gauges,
stethoscope, telescopic gauges, temperature gauges,
tachometer, timing lights, vacuum gauges, verniers, and
may include anemometer, barometer, specific gravity
gauge

Tests

•

Tests to be conducted are to include component wear
analysis, compression, cylinder leakage, engine
performance, oil consumption, pressure, sample
collection/processing, specific gravity, temperature,
vacuum, ignition timing adjustments, injector pump
timing

Personal protective
equipment

•

Personal protective equipment is to include that
prescribed under legislation, regulations and enterprise
policies and practices

Information and
procedures

•

Workplace procedures relating to the use of tools and
equipment

•

Workplace procedures relating to reporting and
communication

•

Manufacturer/component supplier specifications and
application procedures for testing equipment and material

Automotive Industry RS&R

AURT5737A Analyse and evaluate light marine engine and powerhead system faults

©Australian National Training Authority

AUR99 Version 4.00 Review by 30 June 2004

589

RANGE STATEMENT

Information and
procedures (continued)

• Manufacturer/component supplier specifications,

schematics and operational procedures related to light
marine engine systems

• Marine industry regulations

• Marine industry publications related to emerging engine

system technology and technology changes

EVIDENCE GUIDE

The Evidence Guide identifies the critical aspects, knowledge and skills to be demonstrated
to confirm competency for this unit. This is an integral part of the assessment of competency
and should be read in conjunction with the Range Statement.

Critical aspects of
evidence

• Interpret work order and locate and apply relevant

information

• Apply safety requirements including the isolation of

equipment and the use of personal protective equipment

• Follow work instructions, operating procedures and

inspection processes to:

• minimise the risk of injury to self and others

• prevent damage and wastage of goods, equipment

and products

• maintain required production output and product

quality

• Complete failure analyses on a minimum of three (3)

light marine engine powerhead systems with real or
simulated multi-system and intermittent faults and
identify, evaluate, select and record the most appropriate
rectification measure

• Analyse and validate or recommend variations to a

minimum of two (2) available repair/modification
procedures for light marine engine powerhead systems

• Accurately record and report the diagnostic process and

findings and recommended rectification for two of the
above

• Work effectively with others

• Modify activities to cater for variations in workplace

context and environment

AURT5737A Analyse and evaluate light marine engine and powerhead system faults

Automotive Industry RS&R

590

AUR99 Version 4.00 Review by 30 June 2004

©Australian National Training Authority

EVIDENCE GUIDE

Underpinning knowledge

• Light marine terminology and definitions

• General knowledge of the concepts, principles and

processes involved in planning and implementing
systems analysis and evaluation

• Basic electrical theory covering voltage, current,

resistance, power, magnetics and inductance

• Mechanical theory covering the concepts and principles

of mechanical, hydraulic and pneumatic systems

• General knowledge of the types, functions, operations

and limitations of light marine engines

• Detailed knowledge of the types, function, operations and

limitations of light marine fuel systems/components

• Detailed knowledge of the types, function, operations and

limitations of light marine ignition systems/components

• Detailed knowledge of the types, function, operations and

limitations of light marine intake systems/components

• Detailed knowledge of the types, function, operations and

limitations of light marine exhaust systems/components

• Detailed knowledge of the types, function, operations and

limitations of light marine lubrication
systems/components

• Detailed knowledge of the types, function, operations and

limitations of light marine cooling systems/components

• Detailed knowledge of the types, function, operations and

limitations of light marine engine mounting
systems/components

• General knowledge of the theory of diagnosis including

concept, design and planning

• Detailed knowledge of the types, functions, operations

and limitations of diagnostic testing equipment

• General knowledge of marine digital computing systems

• General knowledge of the methods and processes for

recording and reporting diagnostic findings and
recommendations

Automotive Industry RS&R

AURT5737A Analyse and evaluate light marine engine and powerhead system faults

©Australian National Training Authority

AUR99 Version 4.00 Review by 30 June 2004

591

EVIDENCE GUIDE

Underpinning skills

These include a number of processes that are learnt throughout work and life, which are
required in most jobs. Some of these are covered by the national key competencies, although
others may be added. The questions below highlight how these processes are applied in this
competency unit. The number in brackets indicates the level to which the key competency
needs to be demonstrated where (1) is where work is within set conditions and process, (2) is
where the management or facilitation of conditions or process is exercised, and (3) is where
the design and/or development of conditions or process are required.

How will the candidate apply the following key competency in this unit?

The candidate will need to:

Collect, analyse and
organise information

Research, organise and understand technical information
related to contemporary light marine engine powerhead
systems, monitoring and testing processes, diagnostic methods
and options and safety procedures.

(Level 3)

Communicate ideas and
information

Communicate ideas and information to enable confirmation of
work requirements and specifications, coordination of work
with site supervisor, other workers and customers, the reporting
of work outcomes and the completion of regulatory,
commercial and information systems inputs.

(Level 2)

Plan and organise
activities

Plan and organise activities including the planning of analytical
processes, the establishment of evaluative (success) criteria, the
preparation and layout of the worksite and the obtaining of
testing equipment and material to avoid any back tracking,
workflow interruptions or wastage.

(Level 2)

Work with others and in
a team

Work with others and in a team by recognising dependencies
and using cooperative approaches to optimise workflow and
productivity.

(Level 2)

Use mathematical ideas
and techniques

Use mathematical ideas and techniques to correctly complete
measurements, calculate analytical requirements, calibrate and
establish testing equipment and present analytical results.

(Level 2)

Solve problems

Establish analytical processes, including diagnostic processes,
which anticipate and allow for risks, cater for both direct and
indirect evidence, avoid or minimise reworking and avoid
wastage.

(Level 3)

AURT5737A Analyse and evaluate light marine engine and powerhead system faults

Automotive Industry RS&R

592

AUR99 Version 4.00 Review by 30 June 2004

©Australian National Training Authority

EVIDENCE GUIDE

Underpinning skills (continued)

Use technology

Use the workplace technology related to systems analysis and
diagnosis, information research and management systems,
testing equipment, maintenance equipment, tools, calculators
and measuring devices.

(Level 2)

EVIDENCE GUIDE

Resource implications

•

Access to a realistic requirement and objective(s) for
analysis and evaluation, light marine engine powerhead
systems with real or simulated faults, monitoring
processes and testing equipment appropriate to the
objective(s), research facilities and technical information
and a realistic work environment

Method of assessment

•

Assessment of this competency is most likely to be
project related under real or simulated conditions and
require portfolios or other forms of indirect evidence of
process. Direct evidence may include certification of
compliance of the final outcome/product or authorisation
for use by a competent authority

•

Assessment must confirm the inference that competency
is able not only to be satisfied under the particular
circumstances, but is able to be transferred to other
circumstances

Context/s of assessment

•

Assessment may occur on the job or in a workplace
simulated facility with relevant process equipment,
material, work instructions and deadlines

Automotive Industry RS&R

AURT5738A Analyse and evaluate light marine hull performance and stability system faults

©Australian National Training Authority

AUR99 Version 4.00 Review by 30 June 2004

593

AURT5738A

Analyse and evaluate light marine hull
performance and stability system faults

Unit descriptor

This unit covers the competency to correctly analyse and
evaluate light marine hull performance systems in order to
initiate action to sustain, vary or enhance performance. It
includes failure analysis covering the complex diagnosis of
multi-system and intermittent faults as well as evaluation of
performance achievements and variations. It also requires the
candidate to identify, evaluate, select and record the most
appropriate response to the stated objective of the analysis and
evaluation process.

This unit forms part of the competency inventory for an
automotive technologist or subject matter specialist. It
encompasses and builds on trade level competencies.

ELEMENT PERFORMANCE

CRITERIA

1. Identify and confirm

the work requirement

1.1

Work instructions and reports are used to determine the
nature and objective of the analysis and evaluation
requirements

1.2

Benchmark specifications for correctly functioning light
marine hull performance systems are accessed and
interpreted

1.3

OH&S requirements including equipment and system
isolation requirements and personal protection needs are
observed throughout the work

1.4

The effects of any systemic deficiencies/discrepancies or
faults are identified and confirmed from indirect and/or
direct evidence

1.5

Possible safety impacts of the work are considered and
responded to in accordance with regulatory and
enterprise obligations and practices

2. Prepare for analysis

and evaluation

2.1

Evaluative criteria are developed/adopted to meet the
objective of the work

2.2

System performance achievements and/or discrepancies
are identified from an analysis of technical support
information and available on-board diagnostic systems

2.3

The most appropriate analytical and evaluative
methodology including diagnostic process, sequence,
tests and testing equipment are developed and/or
identified and selected from the range of available
options

AURT5738A Analyse and evaluate light marine hull performance and stability system faults

Automotive Industry RS&R

594

AUR99 Version 4.00 Review by 30 June 2004

ELEMENT PERFORMANCE

CRITERIA

2. Prepare

for

analysis

and evaluation
(continued)

2.4

Testing equipment is obtained and prepared for
application in accordance with regulatory,
manufacturer/component supplier and enterprise
requirements

2.5

Tools and material required to support the diagnostic
process are identified, selected and prepared for use

2.6

Light marine hull performance system components are
prepared for the diagnostic process including park-up,
isolation and cleaning requirements

3. Apply the analysis and

evaluative
methodology

3.1

The selected analytical and diagnostic process is
followed in accordance with specifications and directions
and/or the locally authorised method

3.2

Tests and testing equipment are applied in accordance
with regulatory requirements and the
manufacturer/component supplier specifications

3.3

Analytical and other diagnostic findings are verified, if
necessary by using reliable alternate or optional
processes, and documented

3.4

Analytical findings and results are evaluated against the
agreed criteria

3.5

Valid conclusions are drawn from the available evidence
and documented to enterprise requirements

3.6

Information and detail related to the analysis and
evaluation is provided to the appropriate parties in
accordance with regulatory and commercial obligations

4. Select response

measure

4.1 Options for responding to the objective or need are

identified from further research of technical support
information

4.2 The most appropriate response option is selected from an

analysis of the options, the prevailing circumstances,
regulatory requirements and commercial policies

4.3 The selected response option is documented and reported

in accordance with regulatory and enterprise
requirements and practices

Restore the workplace

5.1 Material that can be reused is collected and stored

5.2 Testing equipment and other support material are cleaned,

maintained and prepared ready for further use or stored in
accordance with manufacturer/component supplier
specifications and enterprise requirements

5.3 Waste and scrap is removed following workplace

procedures

Automotive Industry RS&R

AURT5738A Analyse and evaluate light marine hull performance and stability system faults

AUR99 Version 4.00 Review by 30 June 2004

595

ELEMENT PERFORMANCE

CRITERIA

Restore the workplace
(continued)

5.4 Equipment and work area are cleaned and inspected for

serviceable condition in accordance with workplace
procedures

5.5 Unserviceable equipment is tagged and faults identified in

accordance with workplace

RANGE STATEMENT

The Range Statement provides advice to interpret the scope and context of this unit of
competency, allowing for differences between enterprises and workplaces. It relates to the unit
as a whole and facilitates holistic assessment. The following variables may be present for this
particular unit:

Unit scope

•

The objective of the failure analysis and evaluation
process may be to determine fault rectification measures,
to effect variation in system characteristics and
parameters or to enhance system performance

•

Total systems to be covered in this unit are to include the
boat and engine combination as well as boat trimming
systems, boat loading and all fitted accessories

•

Boats are to include inboard and outboard propelled
vessels, including twin engine installations, which are
fifty horsepower or above. They can be either two stroke,
four stroke or diesel

•

Failures covered by this unit are to include engine (poor
performance, poor selection, incorrect fitting,
overloading, overpowering), propeller selection (size,
pitch, material and application), hull faults and stress
(transom rot, delamination, hook, rocker, power hook,
surface finish and design), mounting (noise, vibration,
hardness)

•

Boat performance and control faults covered by this unit
are to include indirect faults caused by the influence of
external systems which may or may not be faulty in their
primary operation

Unit context

•

OH&S requirements include vehicle industry regulations,
safety management systems, hazardous substances and
dangerous goods code and safe operating procedures

•

Content .. 78 79 80 81 ..