Diesel engine 12V 4000 G73, 16V 4000 G73. Manual - part 12

 

  Index      Engines     Diesel engine 12V 4000 G73, 16V 4000 G73. Application group 3B - service manual

 

Search            

 

 

 

 

 

 

 

  

 

Content   ..  10  11  12  13   ..

 

 

Diesel engine 12V 4000 G73, 16V 4000 G73. Manual - part 12

 

 

Fault code

No.

Designation

Meaning

Task

Related

parameter

No.

177

AL LifeData restore in‐

complete

Alarm configuration; This

error message is generated

if a CRC is faulty during a

data upload to ADEC (indi‐

cated for each indiv. mod‐

ule).

Contact Service.

2.4000.00

6

180

AL CAN1 Node Lost

Alarm configuration; Con‐

nection to a node on CAN

bus 1 failed.

Contact Service.

2.0500.68

0

181

AL CAN2 Node Lost

Alarm configuration; Con‐

nection to a node on CAN

bus 2 failed.

Contact Service.

2.0500.68

1

182

AL CAN Wrong Param‐

eters

Alarm configuration; Incor‐

rect parameter values en‐

tered in data record.

Contact Service.

2.0500.68

2

183

AL CAN No PU-Data

Alarm configuration; A CAN

mode has been selected in

which communication with

the PU data module is ini‐

tialized. However, the re‐

quired PU data module is

not available or not valid.

Contact Service.

2.0500.68

3

184

AL CAN PU-Data Flash

Error

Alarm configuration; A pro‐

gramming error occurred

when attempting to copy a

received PU data module

into the Flash module.

Contact Service.

2.0500.68

4

186

AL CAN1 Bus Off

CAN 1 in Bus-Off state: Ei‐

ther short circuit on bus. Or

massive magnetic fields dis‐

rupting the bus.

Contact Service.

Inspect CAN bus

for short circuit and

rectify short circuit

as necessary.

Check shielding,

improve as neces‐

sary.

2.0500.68

6

187

AL CAN1 Error Passive

CAN 1 in Error-Passive

state, minor bus disruption

or CAN station missing.

Contact Service.

Check that at least

one CAN station is

available. Check

cabling as re‐

quired. Check

shielding, improve

as necessary.

2.0500.68

7

188

AL CAN2 Bus Off

CAN 2 in Bus-Off state: Ei‐

ther short circuit on bus. Or

massive magnetic fields dis‐

rupting the bus.

Contact Service.

Inspect CAN bus

for short circuit and

rectify short circuit

as necessary.

Check shielding,

improve as neces‐

sary.

2.0500.68

8

Fault code

No.

Designation

Meaning

Task

Related

parameter

No.

189

AL CAN2 Error Passive

CAN 2 in Error-Passive

state, minor bus disruption

or CAN station missing.

Contact Service.

Check that at least

one CAN station is

available. Check

cabling as re‐

quired. Check

shielding, improve

as necessary.

2.0500.68

9

190

AL EMU Parameter Not

Supported

Alarm configuration; EMU

parameters are not support‐

ed.

Contact Service.

2.0500.69

0

201

SD T-Coolant

Sensor B06 faulty (coolant

temperature).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

0

202

SD T-Fuel

Sensor B33 faulty (fuel tem‐

perature).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

2

203

SD T-Charge Air

Sensor B09 faulty (charge-

air temperature) A side.

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

1

204

SD T-Coolant Intercool‐

er

Sensor B26 faulty (charge-

air coolant temperature).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

4

205

SD T-Exhaust A

Sensor B4.21 faulty (ex‐

haust temperature) engine

A side.

1. Check cabling
2. Replace if nec‐

essary.

1.8004.57

6

206

SD T-Exhaust B

Sensor B4.22 faulty (ex‐

haust temperature) engine

B side.

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

7

208

SD P-Charge Air

Sensor B10 faulty (charge-

air pressure), short circuit or

wire break

Check sensor and

cabling, replace as

necessary. Error

cleared after re‐

starting the engine.

1.8004.56

6

211

SD P-Lube Oil

Sensor B05 faulty (lube oil

pressure).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.56

3

212

SD P-Coolant

Sensor B16 faulty (coolant

pressure).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.56

4

213

SD P-Coolant Inter‐

cooler

Sensor B43 faulty (inter‐

cooler coolant pressure).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.56

9

TIM-ID: 0000016865 - 001

Fault code

No.

Designation

Meaning

Task

Related

parameter

No.

214

SD P-CrankCase

Sensor B50 faulty (crank‐

case pressure).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.56

8

215

SD P-HD

Sensor B48 faulty (rail pres‐

sure, HP regulator); emer‐

gency mode active.

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.56

7

216

SD T-Lube Oil

Sensor B07 faulty (lube oil

temperature).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

5

219

SD T-Intake Air

Sensor B03 faulty (intake

air temperature).

1. Check cabling.
2. Replace if nec‐

essary.

1.8004.57

3

220

SD Level Coolant Wa‐

ter

Sensor F33 faulty (coolant

level 1).

1. Switch system

OFF and ON

again;
2. Check error

message;
3. Check cabling;
4. Contact Service;
5. Check sensor.

1.8004.58

4

221

SD Diff-Lube Oil

Sensor F25 faulty (lube oil

differential pressure).

1. Check sensor

and wiring.
2. Replace if nec‐

essary.
Error cleared after

restarting the en‐

gine.

1.8004.58

5

222

SD Level Leakage Fuel

Sensor F46 faulty (leak

fuel).

1. Check sensor

and wiring.
2. Replace if nec‐

essary.
3. Contact Service.

1.8004.58

2

223

SD Level Coolant Inter‐

cooler

Sensor F57 faulty (charge-

air coolant level).

1. Check sensor

and wiring.
2. Contact Service.

1.8004.58

3

227

SD P-Oil before Filter

SD alarm configuration;

Sensor B5.3 (lube oil pres‐

sure before filter) faulty;

short circuit or wire break.

Check sensor and

cabling, replace as

necessary. Error

cleared after re‐

starting the engine.

1.8004.62

0

229

AL Stop Camshaft Sen‐

sor Defect

Crankshaft and camshaft

speed sensor faulty.

1. Check cabling.
2. Contact Serv‐

ice.; Check sensor.

1.8004.56

2

Fault code

No.

Designation

Meaning

Task

Related

parameter

No.

230

SD crankshaft Speed

Sensor B13 faulty (crank‐

shaft speed).

1. Check sensor

and wiring.
2. Contact Service.

1.8004.49

8

231

SD Camshaft Speed

Sensor B1 faulty (camshaft

speed).

1. Check sensor

and wiring.
2. Contact Service.

1.8004.49

9

232

SD Charger 1 Speed

Sensor B44 faulty (turbo‐

charger speed 1).

1. Check sensor

and wiring.
2. Contact Service.

1.3011.12

8

233

SD Charger 2 Speed

Sensor B44.2 faulty (turbo‐

charger speed 2).

1. Check sensor

and wiring.
2. Contact Service.

1.3011.12

9

240

SD P-Fuel

Sensor B34 faulty (fuel

pressure).

1. Check sensor

and wiring.
2. Contact Service.

1.8004.56

5

241

SD T-Umblasen

Sensor B49 faulty (recircu‐

lation temperature).

1. Check sensor

and wiring.
2. Contact Service.

1.8004.58

1

242

SD T-Coolant (R)

Redundant coolant temper‐

ature sensor faulty.

1. Check sensor

and wiring.
2. Contact Service.

1.8004.62

2

244

SD P-Lube Oil (R)

SD alarm configuration; Re‐

dundant lube oil pressure

sensor faulty; Short circuit

or wire break.

Check sensor and

cabling, replace as

necessary. Error

cleared after re‐

starting the engine.

1.8004.62

1

245

SD ECU Power Supply

Voltage

Sensor fault (ECU operating

voltage).

Replace engine

governor.

2.8006589

266

SD Speed Demand

External speed demand

faulty.

1. Check cabling.
2. Check speed

demand.

2.8006.58

6

269

SD Loadp.Analog filt

SD alarm configuration; Fil‐

tered analog signal of load

pulse missing; short circuit

or wire break.

Check cabling, re‐

place as necessa‐

ry.
Error cleared after

restarting the en‐

gine.

2.8006.58

8

270

SD Frequency Input

Frequency setting sensor

faulty.

1. Check cabling.
2. Contact Serv‐

ice.; Check set‐

point speed trans‐

mitter.

2.8006.59

0

TIM-ID: 0000016865 - 001

 

 

 

 

 

 

 

Content   ..  10  11  12  13   ..